隔声屏障在冷却机组降噪中的设计与应用实证

本文对成都双流九江环保垃圾发电厂循环冷却机组进行噪声治理,通过在声音传播途径上设立隔声屏障,并对该声屏障进行声学设计理论计算,声屏障建成后该机组在厂界外1m处,噪声值达到国家厂界噪声排放标准要求,并通过详细的实测数据、建立图形,进一步验证了声屏障理论计算公式和保护范围。     

Investigation of Environmental Effects Based on Exergetic Irreversibility for Display Cases’ Units in Commercial Cooling

This study examines energetic and exergetic performances of display cases’ units used in market applications depending on different refrigerants. Besides CO₂ emission potential of each refrigerant based on exergetic irreversibility obtained from analyses is calculated by the method of Total Equivalent Warming Impact (TEWI). In this study, 1 kW cooling capacity and vapor compression cooling cycle is taken as reference and refrigerants of R-22, R-134a, R-404A, and R-507 together with alternative refrigerant R-407C and R152a are examined separately. According to analyses, R-404A gas, used widely in market applications, has low performance with average COP 3.89 and average exergy efficiency 55.20%. R-152a gas has the best performance by the thermodynamics parameters including COP 4.49, exergy efficiency 63.79%, and 0.23 kW power consumption and emission parameter 14097.490 ton CO₂/year. Although COP is used as a criterion to evaluate the systems, this study finally emphasizes the importance of exergy analysis and TEWI method which are important methods to determine irreversibility and emission potential of the systems.     

H3880-V890B综合环境应力可靠性试验系统介绍

综合环境应力可靠性试验,对于验证产品可靠性平均无故障工作时间（ＭＴＢＦ）和暴露产品设计、元件选用２、生产工艺等方面的缺陷有着十分重要的作用。综合环境应力可靠性试验设备是实施该项试验的重要手段。本文详述Ｈ３８８０－Ｖ８９０Ｂ试验系统的布局、功能、参数及主要技术,旨城向试验同行介绍目前试验设备的最新技术动态。同时希望资源共享,为暂不具备大型综合环境应力设备的单位提供协作,共同为提高我国的装备技术水平作     

La3+掺杂对吸附相反应制备TiO2复合催化剂的结晶过程及弱紫外光下活性的影响

利用吸附相反应技术制备弱紫外光响应的高效催化剂,并通过XRD、XPS以及HRTEM探索了不同焙烧温度下La3+掺杂量对TiO2结晶过程的影响.结合弱紫外光下甲基橙的降解反应,深入研究催化剂结晶过程的变化对弱紫外光下催化剂活性的影响.结果表明,La3+掺杂会抑制TiO2的结晶过程.当焙烧温度或者掺杂量较低时,La3+不能进入TiO2的晶格结构但会轻微地抑制TiO2的结晶过程;未进入晶格结构的La3+存在会引入光生载流子的浅能级捕获中心,在弱光体系中极大提升了催化剂的活性.当La3+的掺杂量为0.05%(原子分数)时,经过900℃焙烧后催化剂降解能力最高,其活性超过商用P25的2倍多.在较高La3+掺杂量(超过0.20%)时,900℃焙烧后一定量La3+进入TiO2的晶格结构而大大抑制了TiO2结晶;这种强烈的抑制作用使得催化剂中存在大量无定形结构TiO2,无定形TiO2甚至多于700℃焙烧后的催化剂,反而大大抑制了弱光体系中催化剂活性.     

A pilot-scale study of cryolite precipitation from high fluoride-containing wastewater in a reaction-separation integrated reactor

Fluoride removal by traditional precipitation generates huge amounts of a water-rich sludge with low quality, which has no commercial or industrial value. The present study evaluated the feasibility of recovering fluoride as low water content cryolite from industrial fluoride-containing wastewater. A novel pilot-scale reaction-separation integrated reactor was designed. The results showed that the seed retention time in the reactor was prolonged to strengthen the induced crystallization process. The particle size of cryolite increased with increasing seed retention time, which decreased the water content. The recovery rate of cryolite was above 75% under an influent fluoride concentration of 3500 mg/L, a reaction temperature of 50℃, and an influent flow of 40 L/hr. The cryolite products that precipitated from the reactor were small in volume, large in particle size, low in water content, high in crystal purity, and recyclable.     

Identification of key factors governing chemistry in groundwater near the water course recharged by reclaimed water at Miyun County, Northern China

Reclaimed water was successfully used to recover the dry Chaobai River in Northern China, but groundwater may be polluted. To ensure groundwater protection, it is therefore critical to identify the governing factors of groundwater chemistry. Samples of reclaimed water, river and groundwater were collected monthly at Chaobai River from January to September in 2010. Fifteen water parameters were analyzed. Two kinds of reclaimed water were different in type (Na-Ca-Mg-Cl-HCO3 or Na-Ca-Cl-HCO3 ) and concentration of nitrogen. The ionic concentration and type in river were similar to reclaimed water. Some shallow wells near the river bed had the same type (Na-Ca-Mg-Cl-HCO3 ) and high concentration as reclaimed water, but others were consistent with the deep wells (Ca-Mg-HCO3 ). Using cluster analysis, the 9 months were divided into two periods (dry and wet seasons), and all samples were grouped into several spatial clusters, indicating different controlling mechanisms. Principal component analysis and conventional ionic plots showed that calcium, magnesium and bicarbonate were controlled by water-rock interaction in all deep and some shallow wells. This included the dissolution of calcite and carbonate weathering. Sodium, potassium, chloride and sulfate in river and some shallow wells recharged by river were governed by evaporation crystallization and mixing of reclaimed water. But groundwater chemistry was not controlled by precipitation. During the infiltration of reclaimed water, cation exchange took place between (sodium, potassium) and (calcium, magnesium). Nitrification and denitrification both happened in most shallow groundwater, but only denitrification in deep groundwater.     

成核方式对诱导结晶工艺处理含铜废水的影响

研究了诱导结晶过程中成核方式对诱导结晶工艺处理含铜废水的影响.在2组严格控制的实验条件下,分别考察均相成核和非均相成核下诱导结晶工艺运行效果,并利用扫描电镜（SEM）、X射线能谱分析（EDS）等手段考察了2种成核方式下回收的结晶产物的生长状态以及纯度.结果表明,当废水中铜的浓度为50 mg.L-1时,均相成核条件下,结...     

粉煤灰源NaY沸石的制备及其对乙酸乙酯的吸附性能研究

采用粉煤灰合成沸石的方法既经济又环保,在乙酸乙酯吸附领域中具有巨大应用前景.遵循节能减排、废物再利用的环保原则,探索了3种不同Si/Al比的粉煤灰、结晶温度、结晶时间和碱浓度4个因素对合成NaY沸石的影响.XRD、氮气吸脱附实验及ICP结果表明,Si/Al比和水热结晶温度对高比表面积NaY沸石的合成影响最大.Si/Al比在1左右的粉煤灰合成的沸石比表面积较低,且晶形中存在大量的NaA沸石,而Si/Al比在2左右的粉煤灰合成了高比表面积且纯度较高的NaY沸石;3种粉煤灰均在65 ℃下合成NaY沸石,但在105 ℃下完全转化为方钠石.实验优化结果表明,最优合成条件为采用Si/Al为2左右的粉煤灰,在2 mol·L^-1碱浓度、65 ℃水热温度下结晶12 h.该条件下合成的NaY沸石比表面积高达654.86 m²·g^-1(比表面积最高的粉煤灰源沸石之一),是原粉煤灰比表面积的22倍左右,对乙酸乙酯的吸附量也由15.4 mg·g^-1增至108.2 mg·g^-1.     

Crystallization and X‐ray structure of 3,3’,4‐trichlorobiphenyl (PCB 35)∗

A method for the preparation of single crystals of PCB 35 suitable for single crystal X‐ray structure determination was developed. This method has already been proven suitable for 2,4'‐dichlorobiphenyl and may prove useful for other PCBs or related compounds. The crystals of PCB 35 are orthorhombic, spacegroup P2₁22₁ (a= 10.665(8), 6 = 3.825(3), c= 14.086(9) Å) and the structure was refined to R = 0.094 for 156 unique observed reflections and 43 parameters. Although the crystals were of poor quality, the structure determination unequivocally confirmed the substitution pattern of the biphenyl moiety by Cl atoms inferred previously from spectroscopic methods. The dihedral angle between the planes of the two phenyl rings is 33(2)°.