Preparation and evaluation of aminopropyl-functionalized manganese-loaded SBA-15 for copper removal from aqueous solution

A novel material, aminopropyl-functionalized manganese-loaded SBA-15 (NH₂-Mn-SBA-15), was synthesized by bonding 3-aminopropyl trimethoxysilane (APTMS) onto manganese-loaded SBA-15 (Mn-SBA-15) and used as a Cu^2 + adsorbent in aqueous solution. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectra (XRD), N₂ adsorption/desorption isotherms, high resolution field emission scanning electron microscopy (FESEM) and X-ray photoelectron spectroscopy (XPS) were used to characterize the NH₂-Mn-SBA-15. The ordered mesoporous structure of SBA-15 was remained after modification. The manganese oxides were mainly loaded on the internal surface of the pore channels while the aminopropyl groups were mainly anchored on the external surface of SBA-15. The adsorption of Cu^2 + on NH₂-Mn-SBA-15 was fitted well by the Langmuir equation and the maximum adsorption capacity of NH₂-Mn-SBA-15 for Cu^2 + was over two times higher than that of Mn-SBA-15 under the same conditions. The Elovich equation gave a good fit for the adsorption process of Cu^2 + by NH₂-Mn-SBA-15 and Mn-SBA-15. Both the loaded manganese oxides and the anchored aminopropyl groups were found to contribute to the uptake of Cu^2 +. The NH₂-Mn-SBA-15 showed high selectivity for copper ions. Consecutive adsorption–desorption experiments showed that the NH₂-Mn-SBA-15 could be regenerated by acid treatment without altering its properties.     

丁香蓼对Cu富集效应的研究

通过盆栽实验研究不同浓度的Cu胁迫对丁香蓼响应和富集效应的影响,结果表明,随着Cu的浓度增加,丁香蓼的株高和生物量降低,长势减弱,但在低浓度(ω(Cu)为125 mg/kg)时降低不明显,与对照组差异性不显著,高浓度与对照组差异性显著。根茎叶中Cu含量随着添加的Cu浓度增加而增加,Cu的含量和富集系数都表现为根叶茎,对Cu的积累量表现为根、茎叶,丁香蓼不是Cu的超富集植物,但对Cu具有较好富集作用和忍耐能力。     

Inertia welding for assembly of copper squirrel cages for electric motors

The automotive industry is developing designs and manufacturing processes for new generations of electric motors intended for use in hybrid and electric vehicles. There is interest in replacing the aluminum traditionally used in induction motor rotors with copper to improve motor capability. This paper focuses on solid-state welding to join copper end rings to copper spokes in the fabrication of copper rotors. Inertia friction welding was explored to examine weldability of these copper components. A better understanding of inertia welding characteristics will help the advancements in its application for induction rotors. The limitations of this application are discussed.     

Biosorption of Cu(II) and Zn(II) onto a lignocellulosic substrate extracted from wheat bran

We studied the removal of copper and zinc ions from aqueous solutions using a lignocellulosic substrate obtained by an acido-basic treatment of wheat bran. The sorption capacity of this material was investigated through batch and column experiments. Batch experimental results showed that the retention capacity of the lignocellulosic substrate was 0.20×10^–3 mol g^–1 at pH 4.5 for copper(II) and 0.24×10^–3 mol g^–1 at pH 6.5 for zinc(II). Column experiments showed a reduced sorption capacity for both ions compared to batch experiments. Batch and column data were analysed using the Langmuir equation in order to determine the affinity constant and the binding capacity of the sorbent and to compare both retention processes.     

Biosorption of copper, zinc, cadmium and nickel by Chlorella vulgaris

The sorption capacity of the microalga, Chlorella vulgaris, was investigated using different metals (Cu, Zn, Cd and Ni), in both monometallic and bimetallic solutions. The final metal concentrations were significantly low. In the case of copper, an acid pretreatment (at pH 3) of the biomass was required to avoid an excessive increase in pH and the subsequent precipitation of metal during tests. This pretreatment was not necessary for the rest of the metals. The study of the influence of pH led to a greater metal uptake at a higher pH, suggesting a clear competition between metal cations and protons during the biosorption process. The biomass concentration was also a relevant variable, and the best sorption capacities were achieved at the lowest biomass concentration. pH also had a great influence on the elution of the metal retained by the biomass. The best recovery yields were obtained for the lower pH of the eluent solution. Sorption isotherms were well fitted to the Langmuir model, for both single-metal and two-metal systems. In both cases, the biomass showed a greater affinity for Cd.     

The contemporary copper cycle of Asia

A regional stock and flow model for an industrial metal was developed based on the substance-flow framework. Using this model, the contemporary copper cycle of the Asian region was constructed by aggregating country-level production and import and export data for different stages of the copper cycle. The reliability and availability of data were assessed both qualitatively and quantitatively. Asia as a region is a net importer of copper. There is a significant build-up of copper in use at a rate of nearly 3TgCu/year. The per capita generation of copper waste (0.4kgCu/(capita-year)) and the rate of secondary recovery of copper are low compared with Europe and North America. Japan's rates of use, waste generation, and recycling of copper are all much larger than the continental average. A tremendous potential exists in the region to utilize the copper content of the in-use reservoir, and subsequently to enhance copper recycling rates in the future. A set of metrics for the copper cycle is suggested in order to address sustainability issues related to resource policy and the environmental management of copper.     

Toxicity of copper in sewage sludge

Sewage sludge is a source of organic matter and nutrients, but a major obstacle for its recycling is that the municipal wastewater sludge has low but significant levels of contaminants. This investigation, on the acute toxicity of copper in sewage sludge, was conducted with three organisms, Daphnia magna, Lemna minor and Raphanus sativus (seeds). The toxicity of the leakage water from sewage sludge spiked with CuSO(4) was studied for 64 days. The toxicity increased during the first 8-16 days and then started to decrease. The first increase in toxicity was due to ammonia, but after 32 days, a dose-related effect of copper was found. After 64 days, L. minor had an EC50 of 3800 mg Cu/kg dw for 7 days growth inhibition, a LOEC of 3200 mg Cu/kg dw and a NOEC of 1600 mg Cu/kg dw. D. magna had an EC50 of 18100 mg Cu/kg dw (24-h immobility) and a NOEC of 12800 mg Cu/kg dw. Root elongation of R. sativus was reduced at 25600 mg Cu/kg dw. Both for Daphnia and Lemna, the pH of the leakage water had an effect of the toxicity. This means that chemical speciation and bioavailability is very important for the hazard assessment of copper in sludge and soil.     

催化动力学光度法测定痕量铜（Ⅱ）

研究了在稀硫酸介质中，用α，α‘－联吡啶作活化剂，痕量铜催化高碘酸钾氧化茂红Ｔ的褪色反应及动力学条件，建立了催化动力学光度法测定痕量铜的方法。检测限为０．４１μｇ／ＬＣｕ，线性范围为０－０．８μｇ／２５ｍＬＣｕ。方法操作简单，灵敏度高，准确性好，可用于水质及人发中痕量铜的测定，结果满意。     

典型挥发性有机化合物在气体采样罐中的存储稳定性

选取了6种有代表性的挥发性有机化合物（VOCs）,异丙醇、二氯甲烷、乙酸乙烯酯、正己烷、苯和四氯化碳,实测了这些VOCs在气体采样罐（SUMMA罐）中的存储稳定性。结果表明：苯、正己烷和二氯甲烷在采样罐中均较稳定,其含量在84 d的存储期内基本无变化;乙酸乙烯酯在6个VOCs中最不稳定,在普通和惰性采样罐中含量均明显下降;异丙醇和四氯化碳的稳定性与采样罐的类型有关,在普通采样罐内含量下降明显,而在惰性采样罐内则相对稳定。实际监测工作中,为提高VOCs分析的准确性,如目标分析物有含氧类（醇,酮,酯等）或含卤素类VOCs,则采样后需尽快分析,同时尽量选择惰性采样罐为采样容器。     

鳗鲡仔鱼(Anguilla japonica Temn. et Schl.)对铜离子的回避反应

本文力图用回避实验的方法分析铜离子对闽江鳗鲡及其他水产资源的影响。实验在流水中进行,温度为16±0.5℃,pH为7.43±0.2,溶解氧为62-68.9%;鱼体长为46-69.5mm,重量为174.2-226.6mg;每一浓度测试20次。当浓度为0.0001ppm时,回避度为12.81%;浓度为0.016ppm时,有明显的回避反应,回避度为58.28%;浓度升至0.064ppm时,回避度84.74%,为完全回避。