Analysis of chromium and copper by cathodic stripping voltammetry with mixed ligands

Cathodic adsorptive stripping voltammetry is one of the most sensitive analytical methods for ultratrace analysis. The detection limit is usually lower than 10⁻⁹ mol/L. Most adsorptive stripping procedures have been focused on the one ligand/one analyte approach. In order to reduce analysis time and sample volume, the possibility of simultaneously determining several metals by cathodic stripping voltammetry using a mixture of ligands was explored, e.g., by Colombo and van den Berg (1997). Here, we describe a new procedure for quantifying chromium and copper using 2,2′-bipyridine and 8-hydroxyquinoline (oxine). The effect of various operational parameters such as buffer type, ligand concentration, potential and time collection were assessed and optimized. Possible interferences by trace metals and organic matter were also investigated. Applicability for fresh water is illustrated. Electronic Publication     

Cu and Cd removal from wastewater by a microalloyed aluminium composite

We studied the removal of cadmium and copper from industrial wastewaters by a microalloyed aluminium composite. The composite was highly efficient, resulting in water concentrations of cadmium and copper below the maximal allowed concentrations for drinking water. Moreover, our results show that the removal mechanism is mainly based on reduction and coprecipitation, since Cd and Cu were removed from the wastewater in reduced forms as metals and hydroxides.Selected article from the Regional Symposium on Chemistry and Environment, Krusevac, Serbia, June 2003, organised by Dr. Branimir Jovancicevic     

Copper distribution in chemical soil fractions and relationships with maize crop yield

Agricultural practices can lead to copper accumulation in soils and at high concentration it can become toxic for plants. One common toxic effect of copper on plants is a decrease of crop yield. Here, we studied 1) the crop yield of maize grown on plots of a soil intentionally enriched with copper sulphate and 2) the possible relationship between the copper concentration in chemical soil fractions and the maize crop yield. Anthropogenic copper is mainly bound to manganese oxides, to iron oxides and to the organic matter. Maize (Zea maize L.) was grown on outdoor experimental plots. The crop yield was evaluated for three development stages: the 6–10 leaf stage, the female flowering stage and the maturity stage, 2, 4 and 6 years after the soil copper enrichment. Strong crop yield reductions, proving a toxic effect of copper on maize growth were noted 2 years after the copper input at the maturity stage and 4 years after the copper input at the 6–10 leaf stage. Variations in maize crop yield are described with linear multiple regression equations including the variable copper content in soil, and other variables when needed such as soil pH, soil organic carbon level and the climatic variables, the precipitation rate and the ambient temperature. The crop yield study at the 6–10 leaf stage and at the female flowering stage does not provide significant regression equations, while the crop yield study at the maturity stage does. Request variables for the models are the total copper content or the copper bound to the organic matter and the meteorological data. Electronic Publication     

龙湾涌铜污染的迁移转化研究

以龙湾涌为例研究了内河涌的铜污染的迁移转化 ,结果表明工业含铜废水的排放及农业含铜农药和化肥的使用 ,使得水体中的铜含量大大升高 ,其年均值由 1 996年的 0 .0 1 58/mg·L- 1增加到 2 0 0 0年的 0 .0 732 /mg·L- 1。对河涌底泥、农田表层土和蔬菜等含铜量的研究表明 ,相当部分的铜迁移至河涌底质 ,并可能随灌溉向土壤和农作物转移。     

Chlorination of dibenzofuran and dibenzo-p-dioxin vapor by copper (II) chloride

Dibenzofuran (DF) is formed from phenol and benzene in combustion gas exhaust streams prior to particle collection equipment. Subsequent chlorination at lower temperatures on particle surfaces is a potential source of chlorinated dibenzofuran (CDF). Gas streams containing 8% O₂ and approximately 0.1% DF vapor were passed through particle beds containing copper (II) chloride (0.5% Cu, mass) at temperatures ranging from 200 to 400 °C to investigate the potential for CDF formation during particle collection. Experiment duration was sufficient to provide an excess amount of DF (DF/Cu=3). The efficiency of DF chlorination by CuCl₂ and the distribution of CDF products were measured, with effects of temperature, gas velocity, and experiment duration assessed. Results of a more limited investigation of dibenzo-p-dioxin (DD) chlorination by CuCl₂ to form chlorinated DD (CDD) products are also presented.

The efficiency of DF/DD chlorination by CuCl₂ was high, both in terms of CuCl₂ utilization and DF/DD conversion. Total yields of Cl on CDF/CDD products of up to 0.5 mole Cl per mole CuCl₂ were observed between 200 and 300 °C; this suggests that nearly 100% CuCl₂ was utilized, assuming a conversion of two moles of CuCl₂ to CuCl per mole Cl added to DD/DF. In a short duration experiment (DF/Cu=0.3), nearly 100% DF adsorption and conversion to CDF was achieved. The degree of CDF chlorination was strongly dependent on gas velocity. At high gas velocity, corresponding to a gas–particle contact time of 0.3 s, mono-CDF (MCDF) yield was largest, with yields decreasing with increasing CDF chlorination. At low gas velocity, corresponding to a gas–particle contact time of 5 s, octa-CDF yield was largest. DF/DD chlorination was strongly favored at lateral sites, with the predominant CDF/CDD isomers within each homologue group those containing Cl substituents at only the 2,3,7,8 positions. At the higher temperatures and lower gas velocities studied, however, broader isomer distributions, particularly of the less CDD/CDF products, were observed, likely due to preferential destruction of the 2,3,7,8 congeners.     

Transport modeling of copper and cadmium with linear and nonlinear retardation factors

The predictive accuracy of using the one-dimensional advection–dispersion equation to evaluate the fate and transport of solute in a soil column is usually dependent on the proper determination of chemical retardation factors. Typically, the distribution coefficient (K_d) obtained by fitting the linear sorption isotherm has been extensively used to consider general geochemical reactions on solute transport in a low-concentration range. However, the linear distribution coefficient cannot be adequately utilized to describe the solute fate at a higher concentration level. This study employed the nonlinear equilibrium-controlled sorption parameters to determine the retardation factor used in column leaching experiments. Copper and cadmium transportation in a lateritic silty-clay soil column was examined. Through the explicit finite-difference calculations with a third-order total-variation-diminishing (TVD) numerical solution scheme, all results of the theoretical copper and cadmium breakthrough curves (BTCs) simulated by using the Freundlich nonlinear retardation factors revealed good agreement with the experimental observations.     

火焰原子吸收法测定苹果中波尔多液的农药残留

通过原子吸收法测定苹果果皮、果肉上波尔多液的农药残留铜的含量,结果表明:喷洒了波尔多液的苹果果皮上铜含量明显大于果肉,在果皮上有一定的农药残留;而未喷洒波尔多液的苹果果皮和果肉中铜的含量的差异很小。     

污染河流悬沙与铜、锌污染相关性研究

通过对矿区选矿废水污染的河流水样和悬沙进行采样,分析悬沙、铜、锌质量浓度,探讨河流悬沙与铜、锌之间的相关关系,是有重要现实意义的.研究结果表明:河流水质铜超标严重,丧失了作为农业用水的使用功能.水中铜污染物量与悬沙量相关关系,锌污染物量与悬沙量相关关系都是极显著的.经过曲线回归方程拟合,锌污染物量与悬沙量之间的回归关系比铜污染物量与悬沙量之间的回归关系显著,有3个曲线方程较优,即:对数方程、二次多项式方程、三次多项式方程.据此,通过测定污染河流悬沙量可以粗略地估算水中锌污染物量.     

Retrospective future proofing of a copper mine: Quantification of errors and omissions in ‘As-built’ documentation

The electrical instrumentation control systems (EICS) ‘As-built’ documentations of a copper mine were found to possess a significant errors and omissions, which hindered the asset owner’s ability to undertake effective and efficient operations and maintenance. A Systems Information Model (SIM) was used to retrospectively create a connected system to ensure all physical equipment and the associated connections that were constructed are modelled in an object-orientated database. In creating the SIM, the existing errors and omissions in the ‘As-built’ documentation were quantified, and cost savings that could be achieved for a future planned copper mine, with a similar design, were identified. The limitations of using conventional computer-aided-design (CAD) to design and document EICS are discussed. It is recommended that retrospectively creating a SIM can provide owners and operators with significant productivity benefits as well as ensure the asset’s integrity. The case study presented provides asset owners and operators with the empirical evidence to challenge conventional thinking surrounding the design, engineering and documentation of EICS using CAD and alternatively consider the use of SIM.     

铜对大鼠肝脏脂质过氧化作用的影响

观察了铜（CuSo₄）在离体大鼠肝微粒体脂质过氧化模型中的反应性及对在体大鼠肝脏脂质过氧化中的抑制作用,结果表明：离体模型中25、50μmol铜对Vc/Fe₂₊及ADP/Fe²⁺激发的肝微粒体脂质过氧化有抑制作用;在体内实验中5、10,20ppm铜灌胃可使大鼠肝匀浆及微粒体中丙二醛含量明显减少,且有剂量依从性,但同时高铜组仍出现铜中毒的病理改变。实验提示,本实验条件下铜与脂质过氧化的关系与给铜剂量、实验模型有关,而铜的抗氧化机制与Cu,Zn－SOD活性提高无关。