Evaluation of a Watershed Model for Estimating Daily Flow Using Limited Flow Measurements1

Abstract: The Soil and Water Assessment Tool (SWAT) model was evaluated for estimation of continuous daily flow based on limited flow measurements in the Upper Oyster Creek (UOC) watershed. SWAT was calibrated against limited measured flow data and then validated. The Nash‐Sutcliffe model Efficiency (NSE) and mean relative error values of daily flow estimations were 0.66 and 15% for calibration, and 0.56 and 4% for validation, respectively. Also, further evaluation of the model’s estimation of flow at multiple locations was conducted with parametric paired t‐test and nonparametric sign test at a 95% confidence level. Among the five main stem stations, four stations were statistically shown to have good agreement between predicted and measured flows. SWAT underestimated the flow of the fifth main stem station possibly because of the existence of complex flood control measures near to the station. SWAT estimated the daily flow at one tributary station well, but with relatively large errors for the other two tributaries. The spatial pattern of predicted flows matched the measured ones well. Overall, it was concluded from the graphical comparisons and statistical analyses of the model results that SWAT was capable of reproducing continuous daily flows based on limited flow data as is the case in the UOC watershed.     

Estimating the variance in before-after studies

Problem

To simplify the computation of the variance in before-after studies, it is generally assumed that the observed crash data for each entity (or observation) are Poisson distributed. Given the characteristics of this distribution, the observed value (x_i) for each entity is implicitly made equal to its variance. However, the variance should be estimated using the conditional properties of this observed value (defined as a random variable), that is, f(x_i|μ_i), since the mean of the observed value is in fact unknown.

Method

Parametric and non-parametric bootstrap methods were investigated to evaluate the conditional assumption using simulated and observed data.

Results

The results of this study show that observed data should not be used as a substitute for the variance, even if the entities are assumed to be Poisson distributed. Consequently, the estimated variance for the parameters under study in traditional before-after studies is likely to be underestimated.

Conclusions

The proposed methods offer more accurate approaches for estimating the variance in before-after studies.     

Impacts on industry of Europe's emerging chemicals policy REACh

For Europe, a new regime in chemicals regulation is about to start. After the proposal of the European Commission concerning the Registration, Evaluation and Authorization of Chemicals (REACh) passed its readings in the European Parliament and some differences with the European Council of Ministers were resolved, the regulation will come into force in June 2007. This paper is focused on the question how serious the cost burdens for industry induced by REACh will be, and whether the New European Member States (NMS) which joined the European Union in May 2004 will be able to cope with the regulation. This evaluation has been done by assessing the legislative, administrative and economic framework in New Member States and by analysing real business cases in companies. The empirical showcase business impact studies are at the same time of interest for companies of EU-15 states, other European countries who may implement the regulation, and even for exporters of raw materials and chemicals outside Europe, who will also have to comply with REACh if they market in the European Community. The results give no indications that REACh adoption will bring significant drawbacks to companies in the NMS. The emerging regulation will bring challenges for individual companies, especially for small and medium-sized ones, but for the European chemical industry as a whole, there is no question that it will be able to cope with REACh burdens without losing its global competitiveness.     

Comparison of Point Estimation Techniques in the Spatial Analysis of Radium-226, Radium-228 and Potassium-40 in Soil

Many environmental surveys require the implementation of estimation techniques to determine the spatial distribution of the variable being investigated. Traditional methods of interpolation and estimation, for example, inverse distance squared and triangulation often ignore features of the data set such as anisotropy which may have a significant impact on the quality of the estimates produced. Geostatistical techniques may offer an improved method of estimation by modelling the spatial continuity of the variable using semi-variogram analysis. The theoretical model fitted to the semi-variogram is then used in the assignation of weighting factors to the samples surrounding the location to be estimated. This paper outlines the results of a comparison between three common estimation methods, polygonal, triangulation and inverse distance squared and a geostatistical method, in the estimation of soil radionuclide activities. The geostatistical estimation method known as kriging performed best over a range of parameters used to test the performance of the methods. Kriging exhibited the best correlation between actual and estimated values, the narrowest error distribution and the lowest overall estimation error. Polygonal estimation was best at reproducing the data set distribution. Conditional bias was evident in all the methods, low values being over-estimated and high values being under-estimated.     

干旱地区水污染控制系统初探

应用数学规划方法,科学地组织污染物的排放或科学地协调各个治理环节,以乌鲁木齐市水磨河流域水污染控制系统为例,对干旱地区水污染控制系统进行了初步探索,从而得出干旱地区污水处理费用的合理负担,并得出污染物排放的数量,质量受自然地理条件制约的结论。     

Semi-parametric statistical approaches for space-time process prediction

The problem of estimation and prediction of a spatial-temporal stochastic process, observed at regular times and irregularly in space, is considered. A mixed formulation involving a non- parametric component, accounting for a deterministic trend and the effect of exogenous variables, and a parametric component representing the purely spatio-temporal random variation is proposed. Correspondingly, a two-step procedure, first addressing the estimation of the non- parametric component, and then the estimation of the parametric component is developed from the residual series obtained, with spatial-temporal prediction being performed in terms of suitable spatial interpolation of the temporal variation structure. The proposed model formula-tion, together with the estimation and prediction procedure, are applied using a Gaussian ARMA structure for temporal modelling to space-time forecasting from real data of air pollution concentration levels in the region surrounding a power station in northwest Spain.     

Identifying the largest individual sample value from a two-way composite sampling design

Composite sampling techniques for identifying the largest individual sample value seem to be cost effective when the composite samples are internally homogeneous. However, since it is not always possible to form homogeneous composite samples, these methods can lead to higher costs than expected. In this paper we propose a two-way composite sampling design as a way to improve on the cost effectiveness of the methods available to identify the largest individual sample value.     

单甲脒饱和蒸气压的测定和估算

用气体的法测单甲脒在１５,２５,３５和４５℃时的饱和蒸气分别为０．２０２,０．５５４６,１．９５,６．２９Ｐａ;亨利常数计算值分别为６．３０×１０＾－４,１．６７×１０＾－３,５．６８×１０＾０－３和１．７８×１０＆－２,根据Ｃｌａｕｓｉｕｓ Ｃｌａｐｅｙｒｏｎ方程求出单甲脒在常温下气化热为８９．２ｋＪ．ｍｏｌ＾－１。     

化工装置停工放空过程中VOCs排放及估算方法

通过分析化工企业典型开、停车过程的排污节点,表明停车过程中大气挥发性有机污染物主要来自装置退料结束后挂壁、底部滞留和内部空间蒸气等滞留在设备内部的残余物料。在总结化工装置停工放空过程中大气挥发性有机物来源的基础上,讨论并提出大气污染排放量估算方法。     

上海浦东国际机场飞机尾气排放对机场附近空气质量的影响

统计2012年10月和11月浦东机场飞机机型和航班架次,根据各类飞机起降的污染物排放设计工作参数,估算出2012年浦东机场飞机起降时排放的NO2、SO2、CO和HC的估算值。利用浦东新区13个空气监测子站二氧化氮和二氧化硫数据绘制等值线图。结果显示,机场所在的江镇点位和祝桥点位二氧化氮浓度变化受飞机影响很大,而飞机排放的二氧化硫对两个点位的影响可以忽略不计。建议采用改进飞机滑行路线、探讨征收飞机碳排放税等措施减少飞机尾气排放对空气质量的影响。