区域自然灾害系统基本单元研究-Ⅱ:应用部分——湖南省综合农业灾情区域分异规律

本文应用灾害系统基本单元理论,以湖南省农业自然灾害为例,在地理信息系统支持下,将湖南省农业自然灾害系统划分为３２５２４个基本单元。进而,以民政部１９７８～１９９３年农业灾情统计数据为标准,通过多因子逐步回归的方法,建立了反映湖南省多年平均状况的五种主要农业灾害灾情模型。最后,以灾害基本单元为最小空间分异单位,对综合农业灾情分异规律进行了探讨,并首次提出了基于自然单元的湖南省综合农业灾情的分异规律首先是受地势控制的东西分异的主要结论。     

Revised emergency vacuum relief device sizing for atmospheric distillation systems

Conventional vacuum relief methodologies are usually protective responses; that is, they accomplish their purpose by substitution of an inert gas (usually nitrogen) for the process gases removed by an external vacuum source, or for condensable vapour collapsed by an internal process mechanism (e.g. condensation). While this approach is theoretically possible for all potential vacuum scenarios, it becomes practically impossible to implement for installations where a rapid phase change can impart near-instantaneous system pressure reductions. The procedure outlined in this paper takes a preventive approach: eliminate the source of vacuum generation before the safe lower system pressure limit is reached. For distillation and other refluxing systems, this vacuum source is usually the main overhead condenser, which is designed to collapse large volumes of condensable vapour. To eliminate the vacuum source requires elimination of the system's ability to rapidly condense vapour. This goal is accomplished by introduction of inert gas directly into the condensing system to ‘blanket’ the heat transfer surface and stop condensation. The procedure determines the rate, amount and location for introduction of inert gas. The required design data include: (i) system starting pressure, (ii) maximum allowable system vacuum, (iii) volume of the condensing system, and (iv) normal system condensing rate. By determining the rate at which the condenser removes vapour volume from the system, and designing an inert gas delivery system to meet or exceed this rate, the vacuum generation potential of the system is effectively eliminated using a much smaller quantity of inert gas than with the more traditional volume substitution methods.     

DERIVATION OF THE GAMMA DISTRIBUTION BY USING THE PRINCIPLE OF MAXIMUM ENTROPY (POME)1

The principle of maximum entropy (POME) was used to derive the two-parameter gamma distribution used frequently in synthesis of instantaneous or finite-period unit hydrographs. The POME yielded the minimally prejudiced gamma distribution by maximizing the entropy subject to two appropriate constraints which were the mean of real values and the mean of the logarithms of real values of the variable. It provided a unique method for parameter estimation. Experimental data were used to compare this method with the methods of moments, cumulants, maximum likelihood estimation, and least squares.     

安徽铜陵地区的大隆组

大隆组属岩石地层单位,系指一套灰黑色硅质层、硅质泥岩、页岩夹灰岩的海相沉积。按岩性特征其顶界划在三叠系殷坑组底部黄绿色泥岩或灰白色粘土层之下:其底界以“压煤灰岩”之底为宜。 大隆组上部生物群组合为Pseudotirolites,下部为Anderssonoceras组合,其时代应为吴家坪期至长兴期。     

复杂岩溶矿床延深水平涌水量的预测

随着岩溶矿床的延深开采,矿坑涌水量的计算成为防治水害首先要解决的难题。文章创造性地采用国外广泛采用的岩溶水衰减动态分析法,选择了我国南方复杂岩溶含水层中有代表性的重庆市红岩煤矿,将丛林采区茅口组岩溶水动力单元和该单元南大巷(标高+370 m)的茅口灰岩岩溶含水层的主要排水点-1号突水点作为研究对象,建立了该单元岩溶含水层的计算模型-衰减动态(流量和水位)方程,求出了岩溶水动力单元水均衡、地下水储量计算和矿坑涌水量预测的水文地质参数:a、T、K、S、μ、Ie,建立了该单元岩溶裂隙-管道水的水均衡方程, 根据连续观察一个水文年以上的丰富地下水动态资料,预测了红岩煤矿370 m标高以下的延伸开采水平(295- 370 m)矿坑涌水量。     

废水处理技术生命周期分析基本概念初探

运用生命周期分析(LCA)可对不同的废水处理工艺方案进行选择和比较，优选出资源消耗和环境污染最少的实施方案。其技术关键在于如何将ISO 14040等国际标准中规定的LCA方法学正确地应用至各种废水处理工艺的相对比较。本文对LCA应用于废水处理技术的一些基本概念进行了定义和探讨，其中包括废水处理系统的定义；废水处理厂的生命周期；废水处理工艺的功能、功能单位和基本流等。     

废锌锰电池真空蒸馏法去除汞的研究

废锌锰电池回收利用中的正交实验,研究蒸馏温度、系统压强和蒸馏时间对去除汞的综合影响;寻找去除汞的最优工艺条件.根据实验结果,使用真空蒸馏的方法处理锌锰电池优化的工艺参数为:蒸馏温度500～600℃,蒸馏时间60～80 min,系统压强3000～7000 Pa.     

挥发酚的蒸馏损失

回收率实验表明,苯酚经预蒸馏后平均回收率在95%左右,损失率达5%.现提出应用经验系数0.95来修正蒸馏过程带来的损失,结果令人满意.     

落地油泥污染及油土分离处理的工艺研究

对落地油泥的组成、性质及其对环境的污染进行了调查和分析;根据落地油泥油土分离小型试验的结果,进行了 0.5t/h油土分离的放大试验。     

老化油处理技术研究进展

老化油是石油工业生产过程中产生的含大量化学药剂、水、黏土及无机盐的状态稳定的复杂乳液,其产生量大、处理难度高。介绍了老化油的来源、成分、数量、对生产的危害、特点及处理难点,总结了老化油现有的处理方法,包括物理法、化学法、生物法及组合工艺,分析了各种方法的优缺点,并对老化油的管理和研究方向提出了建议。