Estimates of synthetic fertilizer N-induced direct nitrous oxide emission from Chinese croplands during 1980-2000

There is increasing concern that agricultural intensification in China has greatly increased N₂O emissions due to rapidly increased fertilizer use. By linking a spatial database of precipitation, synthetic fertilizer N input, cropping rotation and area via GIS, a precipitation-rectified emission factor of N₂O for upland croplands and water regime-specific emission factors for irrigated rice paddies were adopted to estimate annual synthetic fertilizer N-induced direct N₂O emissions (FIE-N₂O) from Chinese croplands during 1980-2000. Annual FIE-N₂O was estimated to be 115.7 Gg N₂O-N year⁻¹ in the 1980s and 210.5 Gg N₂O-N year⁻¹ in the 1990s, with an annual increasing rate of 9.14 Gg N₂O-N year⁻¹ over the period 1980-2000. Upland croplands contributed most to the national total of FIE-N₂O, accounting for 79% in 1980 and 92% in 2000. Approximately 65% of the FIE-N₂O emitted in eastern and southern central China.     

Rapid detection of toxic metals in non-crushed oyster shells by portable X-ray fluorescence spectrometry

The aim of this study was the multi-elemental detection of toxic metals such as lead (Pb) in non-crushed oyster shells by using a portable X-ray fluorescence (XRF) spectrometer. A rapid, simultaneous multi-element analytical methodology for non-crushed oyster shells has been developed using a portable XRF which provides a quick, quantitative, non-destructive, and cost-effective mean for assessment of oyster shell contamination from Pb. Pb contamination in oyster shells was further confirmed by scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS). The results indicated that Pb is distributed in-homogeneously in contaminated shells. Oyster shells have a lamellar structure that could contribute to the high accumulation of Pb on oyster shells.     

Method optimization to measure polybrominated diphenyl ether (PBDE) concentrations in soils of Bratislava, Slovakia

We modified an analytical method to determine polybrominated diphenyl ethers (PBDEs) in urban soils of Bratislava (Slovakia). Gel permeation chromatography (GPC) introduced as a clean-up step for soil extracts substantially reduced matrix enhancements when PBDEs were measured with gas chromatography-negative chemical ionization-mass spectrometry (GC-NCI-MS). The resulting method proved to be accurate, precise, and showed low detection limits. The sum of 15 PBDE concentrations in surface horizons of Bratislava soils ranged from 87 to 627 pg g⁻¹. PBDE concentrations were mostly higher in surface than deeper horizons probably because of atmospheric deposition and lack of substantial vertical transport. Lower brominated PBDEs undergo more soil-atmosphere exchanges or are more scavenged and transferred with litter fall to the soil organic matter than higher brominated ones as suggested by the correlation between lower brominated PBDEs and soil organic C (C_org) concentrations.     

Determination of antibiotics in sewage from hospitals, nursery and slaughter house, wastewater treatment plant and source water in Chongqing region of Three Gorge Reservoir in China

Sewage samples from 4 hospitals, 1 nursery, 1 slaughter house, 1 wastewater treatment plant and 5 source water samples of Chongqing region of Three Gorge Reservoir were analyzed for macrolide, lincosamide, trimethoprim, fluorouinolone, sulfonamide and tetracycline antibiotics by online solid-phase extraction and liquid chromatography-tandem mass spectrometry. Results showed that the concentration of ofloxacin (OFX) in hospital was the highest among all water environments ranged from 1.660 μg/L to 4.240 μg/L and norfloxacin (NOR, 0.136-1.620 μg/L), ciproflaxacin (CIP, ranged from 0.011 μg/L to 0.136 μg/L), trimethoprim (TMP, 0.061-0.174 μg/L) were commonly detected. Removal range of antibiotics in the wastewater treatment plant was 18-100% and the removal ratio of tylosin, oxytetracycline and tetracycline were 100%. Relatively higher removal efficiencies were observed for tylosin (TYL), oxytetracycline (OXY) and tetracycline (TET)(100%), while lower removal efficiencies were observed for Trimethoprim (TMP, 1%), Epi-iso-chlorotetracycline (EICIC, 18%) and Erythromycin-H₂O (ERY-H₂O, 24%). Antibiotics were removed more efficiently in primary treatment compared with those in secondary treatment.     

Impact of anthropogenic emissions and open biomass burning on regional carbonaceous aerosols in South China

Carbonaceous aerosols were studied at three background sites in south and southwest China. Hok Tsui in Hong Kong had the highest concentrations of carbonaceous aerosols (OC = 8.7 ± 4.5 μg/m³, EC = 2.5 ± 1.9 μg/m³) among the three sites, and Jianfeng Mountains in Hainan Island (OC = 5.8 ± 2.6 μg/m³, EC = 0.8 ± 0.4 μg/m³) and Tengchong mountain over the east edge of the Tibetan Plateau (OC = 4.8 ± 4.0 μg/m³, EC = 0.5 ± 0.4 μg/m³) showed similar concentration levels. Distinct seasonal patterns with higher concentrations during the winter, and lower concentrations during the summertime were observed, which may be caused by the changes of the regional emissions, and monsoon effects. The industrial and vehicular emissions in East, Southeast and South China, and the regional open biomass burning in the Indo-Myanmar region of Asia were probably the two major potential sources for carbonaceous matters in this region.     

The impact of ambient ozone on mountain spruce forests in the Czech Republic as indicated by malondialdehyde

Malondialdehyde (MDA), a product of lipid peroxidation and biomarker of oxidative stress, is measured over the long term in spruce Picea abies needles under real conditions in three Czech mountain border areas. The trends presented collate the MDA content in spruce needles with ambient ozone, temperature and precipitation as casual, and defoliation as a subsequent factor for the period 1994-2006. We have found the overall decreasing trends in MDA and defoliation. The highest MDA and defoliation are recorded in the Jizerske, the lowest in the Krusne hory Mts. Out of the examined variables the MDA is predicted best by mean temperature in vegetation season, median of O₃ concentrations and AOT40; these three variables account for 34% of MDA1 and 36% of MDA2 variability. Our hypothesis that higher ambient O₃ exposure results in higher MDA contents in P. abies needles under real conditions has not been approved.     

水体中常见无机阳离子对TiO2薄膜光催化还原Cr（Ⅵ）的影响

选择了6种水体中常见的阳离子（Na^＋、Mg^2＋、Ca^2＋、Al^3＋、Cu^2＋、Ni^2＋）,分别考查了其对TiO2薄膜光催化还原Cr（Ⅵ）的影响;从光吸收、无机离子本身的性质对光生电子的捕获及传递等讨论了上述离子影响TiO2薄膜光催化还原Cr（Ⅵ）的反应速率的原因。结果表明：由于其不能捕获光生电子,Na^＋、Mg^2＋、Ca^2＋本身对TiO2薄膜光催化还原Cr（Ⅵ）的反应速率影响不大;Al^3＋吸引电子能力较强,成为光生电子和Cr（Ⅵ）之间的桥梁,促进了Cr（Ⅵ）的还原;浓度为1 mmmol/L时,Cu^2＋显著地促进了Cr（Ⅵ）的光催化还原,其主要原因是Cu^2＋捕获光生电子的能力很强,起到了催化剂的作用,而浓度大于10 mmol/L时,Cu^2＋形成单质Cu以及对紫外光的吸收都使促进作用降低;Ni^2＋未充满的d轨道具有获得并传递光生电子的能力,也促进了Cr（Ⅵ）的还原;在浓度同为1mmol/L时,对Cr（Ⅵ）光催化还原的促进作用依次为：Cu^2＋〉Al^3＋〉Ni^2＋〉Na^＋、Ca^2＋、Mg^2＋。     

镍网负载纳米TiO2光催化反应器对酸性品红脱色效果实验研究

采用负载纳米TiO2的三维镍网装配了光催化反应器,就其对酸性品红溶液进行脱色效果进行了实验研究。考察了反应器的3种装配条件、品红初始浓度、pH值、H2O2投加量、紫外光剂量等因素对酸性品红脱色效果的影响。结果表明：UV灯＋镍网＋TiO2模式组合的反应器脱色效果最好;在相同的处理时间内酸性品红溶液的脱色率随起始浓度的增大而减小;将酸性品红溶液pH值调至5时脱色效果最明显,70 min的脱色率可高达94.8%。脱色效果还可以通过溶液中添加H2O2和控制紫外线剂量来调节。当溶液中H2O2投加量为0.5 g/L时,处理70 min后的脱色率可高达98.3%;到达反应界面紫外光剂量越多则能够获得越高的酸性品红脱色率。     

CuO-CeO2/AC吸附燃煤烟气中元素汞的实验研究

通过活性炭负载CuO和CeO2来制备吸附剂,采用固定床吸附方式,在不同反应条件下对吸附剂的吸附性能进行测试,筛选出去除效率最好的吸附剂,并通过BET和XRD对吸附剂的理化性质进行分析。结果表明,CuO和CeO2的加入大大改变了原活性炭的比表面积和孔结构,改善了活性炭的吸附性能。CuO-CeO2/AC中CuO和CeO2质量比不同,对汞的去除效率也不同,在1∶2时去除效率最好;CuO-CeO2/AC中所负载的CuO和CeO的总量为5%时,能大大促进汞的吸附效率,增长有效吸附时间;CuO-CeO2/AC对汞的吸附性能随反应温度的增加呈先增加后减小的趋势,在80℃时达到最大值。     

Fe^3＋掺杂TiO2/凹凸棒复合材料的光催化性能

采用酸催化的溶胶-凝胶法制备了一系列Fe^3＋掺杂TiO2/凹凸棒（Fe^3＋-TiO2/ATP）复合光催化剂材料。在可见光条件下,以亚甲基蓝（MB）溶液的光催化降解反应,评价了样品的光催化性能,研究了TiO2负载量、Fe^3＋掺杂量和焙烧温度对复合材料光催化性能的影响。在单因素实验的基础上,采用正交实验设计（L25（53））优化了催化剂的制备条件。光催化实验结果表明,MB在复合材料上的光催化降解反应遵循Langmuir-Hinshelwood（L-H）动力学模型。正交实验结果表明,当TiO2负载量为15%、Fe^3＋掺杂量为0.5%和焙烧温度为550℃时,得到的复合材料对MB的光催化降解效率最佳,测得表观反应速率常数kapp为6.09×10^-3min^-1,反应4 h后MB的降解率（Dt）可达75.88%,相同实验条件下与P25（1.51×10^-3min^-1）相比较,反应速率提高了4.03倍,降解率提高了45.05%。另外,复合材料的沉降性能优于P25,易于分离,是一类有应用前景的复合光催化剂。敏世雄王芳魏立强王永生冯雷佟永纯韩玉琦