A review and test of predictive models for the bioaccumulation of radiostrontium in fish

Empirical relations between the ⁹⁰Sr concentration factor (CF) and the calcium concentration in freshwater aquatic systems have previously been determined in studies based on data obtained prior to the Chernobyl accident. The purpose of the present research is to review and compare these models, and to test them against a database of post-Chernobyl measurements from rivers and lakes in Ukraine, Russia, Belarus and Finland. It was found that two independently developed models, based on pre-Chernobyl empirical data, are in close agreement with each other, and with empirical data. Testing of both models against new data obtained after the Chernobyl accident confirms the models’ predictive ability. An investigation of the influence of fish size on ⁹⁰Sr accumulation showed no significant relationship, though the data set was somewhat limited.     

Vertical migration of radionuclides in undisturbed grassland soils

Literature data on numerical values obtained for the parameters of the two most popular models for simulating the migration of radionuclides in undisturbed soils have been compiled and evaluated statistically. Due to restrictions on the applicability of compartmental models, the convection–dispersion equation and its parameter values should be preferred. For radiocaesium, recommended values are derived for its effective convection velocity and dispersion coefficient. Data deficiencies still exist for radionuclides other than caesium and for soils of non-temperate environments.     

A method of approach to landscape stability. Part 1: Fundamentals and methodology

A four-stage method of providing conditions for improving the stability of a landscape sector is presented. In the first stage, structure and function of the landscape system is examined, predominantly based on the results of monitoring. In the second stage, a method is suggested for applying monitoring data to a dynamic structure with complex functions of the territory under examination. In the third stage, the territory is optimized as to the function of particular components within it. The optimization consists in controlling the dynamics of the flows of material, energy, and population within the sector. In the fourth stage, the holistic function of the landscape strip should be monitored with respect to representative key factors. The entire concept is based on assuming the existence of destabilizing processes leading to ecocritical situations and determining mitigating factors using heuristic methods of optimization.     

NETWORK AND SUBWATERSHED PARAMETERS EXTRACTED FROM DIGITAL ELEVATION MODELS: THE BILLS CREEK EXPERIENCE1

ABSTRACT: An automated extraction of channel network and sub-watershed characteristics from digital elevation models (DEM) is performed by model DEDNM. This model can process DEM data of limited vertical resolution representing low relief terrain. Such representations often include ill-defined drainage boundaries and indeterminate flow paths. The application watershed is an 84 km² low relief watershed in southwestern Oklahoma. The standard for validation is the network and subwatershed parameters defined by the blue line method on USGS 7.5–minute topographic maps. Evaluation of the generated and validation networks by visual comparisons shows a high degree of correlation. Comparison of selected network parameters (channel length, slope, drainage density, etc.) and of drainage network composition (bifurcation, length, slope, and area ratios) shows that, on the average, the generated parameters are within 5 percent of those derived from the validation network. The largest discrepancies were found for the channel slope values. The results of this application demonstrate that DEDNM effectively addresses network definition problems often encountered in low relief terrain and that it can generate accurate network and subwatershed parameters under those conditions.     

Multicriteria evaluation of simulated logging scenarios in a tropical rain forest

Forest growth models are useful tools for investigating the long-term impacts of logging. In this paper, the results of the rain forest growth model FORMIND were assessed by a multicriteria decision analysis. The main processes covered by FORMIND include tree growth, mortality, regeneration and competition. Tree growth is calculated based on a carbon balance approach. Trees compete for light and space; dying large trees fall down and create gaps in the forest. Sixty-four different logging scenarios for an initially undisturbed forest stand at Deramakot (Malaysia) were simulated. The scenarios differ regarding the logging cycle, logging method, cutting limit and logging intensity. We characterise the impacts with four criteria describing the yield, canopy opening and changes in species composition. Multicriteria decision analysis was used for the first time to evaluate the scenarios and identify the efficient ones. Our results plainly show that reduced-impact logging scenarios are more 'efficient' than the others, since in these scenarios forest damage is minimised without significantly reducing yield. Nevertheless, there is a trade-off between yield and achieving a desired ecological state of logged forest; the ecological state of the logged forests can only be improved by reducing yields and enlarging the logging cycles. Our study also demonstrates that high cutting limits or low logging intensities cannot compensate for the high level of damage caused by conventional logging techniques.     

Toward Adaptive Management: The Impacts of Different Management Strategies on Fish Stocks and Fisheries in a Large Regulated Lake

We applied the adaptive management approach to analyze the demand and feasibility of adaptive management of fish stocks in a large regulated lake, Oulujärvi, in northern Finland. The process consisted of four phases: (1) analysis of the current state of the fisheries system (fishers, related markets and industry, fisheries researches and authorities, related organizations, etc.); (2) analysis of the objectives of different stakeholders; (3) the composition of alternative management strategies and assessment of their impacts; and (4) recommendations for future management. We used catch statistics from the period 1973–1995 to analyze fish stocks and fishing. Fish species involved were brown trout (Salmo trutta L.), whitefish [Coregonus lavaretus (L.) sl.], vendace (Coregonus albula L.); and pikeperch (Stizostedion lucioperca L.). Questionnaires and interviews were applied to ascertain the opinions of different groups of fishermen. Several models and cost–benefit analysis were used to assess the ecological, economic, and social impacts of three alternative management strategies. The results emphasize that when determining stocking levels and fishing regulations, the system should be considered as a whole, and impacts on major fish species and different groups of fishermen should be assessed. The stocking policy and fishing regulations should also be flexible to accommodate changing biotic and societal conditions. The key questions in applying the adaptive management process in Oulujärvi fisheries are how to determine clear objectives for fisheries management, find a fisheries management structure that provides workable interactions between different stakeholders, and arrange cost-effective monitoring. The lessons learned from the Oulujärvi experience and recommendations for fisheries management are relevant to other lakes with conflicting objectives of different stakeholders.     

Leaching of atrazine, metolachlor and diuron in the field in relation to their injection depth into a silt loam soil

A field experiment was conducted on a Calcaric Cambisol soil to study the consequences of the penetration depth and properties of pesticides on the risk of subsequent leaching. Three pesticides with different mobility characteristics and bromide were injected at 30 cm (where soil organic matter (OM) was 2%) and 80 cm (soil OM 0.5%) on irrigated plots without a crop. The migration of injected solutes was assessed for two years by sampling the soil solution using six porous cups installed at 50 and 150 cm depth and by relating solute contents to drainage water flux estimated by the STICS model (Simulateur mulTIdisciplinaire pour les Cultures Standard). Pesticides injected at 30 cm were strongly retained so that no metolachlor or diuron was detected at 50 and 150 cm. The ratio of atrazine peak concentration in the soil solution to concentration in the injected solution (C/C₀) was 1 × 10⁻³ and 0.2 × 10⁻³, respectively, at 50 and 150 cm. When injected at 80 cm, (C/C₀) of atrazine, metolachlor and diuron were 10 × 10⁻³, 1 × 10⁻³ and 0.3 × 10⁻³ at 150 cm, respectively; 1/(C/C₀) was correlated with K_oc values reported from databases. The ratio of drainage volume to the amount of water at field capacity in the soil layer between the injection point at 30 cm and the water sampling level (V/V₀) at 50 and 150 cm was 0.6 and 0.9, respectively, for bromide and 1.6 and 1.0 for atrazine. V/V₀ of the injected solutes at 80 cm was for bromide, atrazine, metolachlor and diuron 0.6, 0.9, 1.2 and 1.7, respectively; pesticide V/V₀ was correlated with K_oc. The retardation factor was a good indicator of migration risk, but tended to overestimate retardation of molecules with high K_oc. Atrazine desorption represented an additional leaching risk as a source of prolonged low contamination. The large variability in soil solution of bromide and pesticide concentrations in the horizontal plane was attributed to flow paths and clods in the tilled soil layer. This heterogeneity was assumed to channel water fluxes into restricted areas and thereby increase the risk of groundwater contamination. The methodology used in the field proves to provide consistent results.     

Using the ECLPSS software environment to build a spatially explicit component-based model of ozone effects on forest ecosystems

We have developed a modeling framework to support grid-based simulation of ecosystems at multiple spatial scales, the Ecological Component Library for Parallel Spatial Simulation (ECLPSS). ECLPSS helps ecologists to build robust spatially explicit simulations of ecological processes by providing a growing library of reusable interchangeable components and automating many modeling tasks. To build a model, a user selects components from the library, and then writes new components as needed. Some of these components represent specific ecological processes, such as how environmental factors influence the growth of individual trees. Other components provide simulation support such as reading and writing files in various formats to allow inter-operability with other software. The framework manages components and variables, the order of operations, and spatial interactions. The framework provides only simulation support; it does not include ecological functions or assumptions. This separation allows biologists to build models without becoming computer scientists, while computer scientists can improve the framework without becoming ecologists. The framework is designed to operate on multiple platforms and be used across networks via a World Wide Web-based user interface. ECLPSS is designed for use with both single processor computers for small models, and multiple processors in order to simulate large regions with complex interactions among many individuals or ecological compartments. To test Version 1.0 of ECLPSS, we created a model to evaluate the effect of tropospheric ozone on forest ecosystem dynamics. This model is a reduced-form version of two existing models: , which represents an individual tree, and , which represents forest stand growth and succession. This model demonstrates key features of ECLPSS, such as the ability to examine the effects of cell size and model structure on model predictions.     

THE REGULATED RIPARIAN VERSION OF THE ASCE MODEL WATER CODE: THE THIRD WAY TO ALLOCATE WATER1

ABSTRACT: Lawyers, engineers, and hydrologists are accustomed to thinking of water law as falling into one of two incompatible models: riparian rights (under which water is allocated by courts according to the relative reasonableness of the competing uses) and appropriative rights (under which water is allocated according to the temporal priority of the competing uses, largely by the action of the water users themselves but perfected by the issuance of an administrative permit). Usually unnoticed is the existence of a third approach, which I have dubbed “regulated riparianism.” Under regulated riparianism, water is allocated by water permits issued after an administrative determination of the reasonableness of the proposed use before the use is commenced. This system, now in place in about half of the states east of Kansas City (plus Hawaii), thus is fundamentally different from either the traditional ripanan rights that it replaces or the appropriative rights found in western states.     

Beach topography mapping—a comparsion of techniques

A comparison of current techniques for measuring elevations in the beach and near-shore zones is presented. Techniques considered include traditional methods such as ground survey along transects and airborne stereophotogrammetry, and also newer methods based on remote sensing such as airborne scanning laser altimetry (LiDAR). The approach taken was to identify a representative group of users of beach elevation data, elicit their requirements regarding these data, then assess how well the different methods met these requirements on both technical and financial grounds. Potential users of beach height measurements include those concerned with coastal defence, coastal environmental management economic exploitation of the intertidal zone, and coastal flood forecasting. Three test areas in the UK were identified covering a range of such users and also different beach types. A total of 17 basic user requirements were elicited. For each requirement each method was scored according to the degree to which it could meet the requirement. Total scores were calculated and each method ranked. This was undertaken for all the requirements together, for a subset relating to survey of narrow beaches, and for a subset relating to survey of wide beaches. Approximate costs were also established for the top six methods. Airborne stereophotogrammetry proved to be the best method technically, but was also the most expensive. Ground survey provides very good technical performance on narrower beaches at moderate cost. Airborne LiDAR can achieve good technical performance on both narrow and wide beaches at lower cost than ground survey. The satellite-based waterline method was also inexpensive and gave good results on wide beaches. An overall conclusion is that, while the traditional methods of ground survey and airborne stereophotogrammetry remain the best for engineering-related surveys requiring high levels of accuracy, airborne LiDAR in particular looks set to have a significant impact on beach survey for applications for which a vertical accuracy of 20 cm is acceptable, provided that its technology evolves satisfactorily.