综合拉底、扩漏和出矿全过程的底部结构安全性颗粒流模拟技术研究

为探明自然崩落法从拉底崩落至出矿全过程中底部结构节理连续扩展过程与破坏过程规律，采用PFC2D软件，结合RocLab软件反演节理岩体参数，建立229 m×129 m的岩体扩大模型，对拉底崩落至出矿过程进行连续综合计算。研究结果表明:模拟结果及破坏现象与现场监测结果相近，建模与细观参数反演方法适用于该类岩体工程研究；裂纹扩展贯通导致岩体失稳破坏，破坏过程与裂纹扩展具有相对应的阶段特征，裂纹扩展分为崩落前稳定扩展期，崩落与聚矿槽开挖过程加速扩展期和后续持续扩展期；结构破坏分为蕴育过程，扰动失稳过程和宏观破坏过程；较大范围的宏观破坏主要在出矿阶段。该模拟方法与结果可为底部结构维护以及节理岩体长期稳定性研究提供参考。     

Laboratory investigation of Waelz slag stabilization

Electric Arc Furnace dusts are considered hazardous waste due to their high heavy metals content (zinc, lead, etc.). The Waelz process is one of the most efficient technologies, in terms of capacity and quality, able to recover nearly the 90% of zinc contained in such EAF dusts. Unfortunately, the resulting slag still has eco-compatibility problems, although its mechanical and chemical properties are suitable for civil engineering applications. Stabilization tests, by quartz addition, were performed on EAF dusts in a laboratory furnace. Temperature, treatment time and cooling rate were varied in order to define the best conditions for regulating the formation of a stable microstructure able to hinder the release of substances. Microstructural characterization was carried-out using SEM and XRD analysis. Leaching tests were performed according to EN 12457-2 standards and water analyses were performed using ICP-OES. The best chemical stability was achieved when dust powders were mixed with 20% of silica and water-cooled.     

A study of the precursors leading to ‘organisational’ accidents in complex industrial settings

This study aggregates the narrative findings from the investigation of 12 accidents or ‘near hits’ across a wide range of industrial settings to build a catalogue of organisational and cultural precursors to accidents. It was found that many were important factors in multiple events. It is argued that by addressing these potential vulnerabilities using the findings and proposed tools based upon them, organisations undertaking safety related activities will not only develop greater awareness of these deeper-lying issues but should be able to better control the risks associated with them.The precursors have been classified under eight headings and examples of key findings from three of these are presented. Statements providing potential defences against the identified vulnerabilities have been developed which should enable organisations to scrutinise the adequacy of existing expectations or requirements within their business. Probing questions have been developed based on the statements which should allow an assessment to be made as to whether these have been ‘embedded’ in the organisation.It is argued that organisational vulnerability tools should be developed to enable a systematic approach to ‘diagnosing’ incubating precursors. It is also argued that there is the potential for further resilience to be achieved through the use of models of the complex dynamics of socio-technical processes within organisations.     

基于改进型AHP与证据理论的应答器系统风险评估

为了科学客观地对应答器系统进行风险评估,规避评估过程中的主观性和不确定性,提出了一种基于改进型AHP与证据理论的评估方法。首先识别系统的风险因素,采用改进型AHP法确定风险因素的权重;然后依据权重将模糊子集引入证据体空间,并加入模糊概率,将专家的模糊描述转换为定量描述,利用证据理论合成规则得到系统风险的mass函数值。最后,以应答器系统为例进行风险评估,结果表明,该方法的评估结果与实际情况基本吻合,验证了该方法的可靠性和有效性。     

基于层次分析法的热塑性聚氨酯及其纳米复合材料火灾危险性综合评价

聚合物的火灾危险性与热、烟、毒的释放密切相关,但采用不同指标对材料的评价结果不一致。以纳米级蒙脱土(MMT)、氢氧化铝(ATH)和聚磷酸铵(APP)为添加剂的热塑性聚氨酯(TPU)纳米复合材料为研究对象,选取其在静态管式炉、稳态管式炉和锥形量热仪中的相关实验数据,以HCN总浓度作为特殊毒性危害指标,CO和CO_2浓度为一般毒性危害指标,以热释放速率峰值、平均热释放速率、总热释放量为热危害指标,以产烟速率峰值、生烟总量为烟危害指标。进一步细分了火灾烟气中不同毒性气体对于火灾风险的影响,并运用层次分析法计算指标权重,综合评价了热塑性聚氨酯及其复合材料的火灾危险性。结果表明,当添加量为6 wt%聚磷酸铵、3 wt%氢氧化铝与3 wt%蒙脱土时,此时复合材料的火灾危险最低,证明了综合热、烟、毒三个层次来降低聚合物材料火灾危险性是可行的。     

Expert system application for prioritizing preventive actions for shift work: shift expert

Introduction. Shift patterns, work hours, work arrangements and worker motivations have increasingly become key factors for job performance. The main objective of this article is to design an expert system that identifies the negative effects of shift work and prioritizes mitigation efforts according to their importance in preventing these negative effects. The proposed expert system will be referred to as the shift expert. Methods. A thorough literature review is conducted to determine the effects of shift work on workers. Our work indicates that shift work is linked to demographic variables, sleepiness and fatigue, health and well-being, and social and domestic conditions. These parameters constitute the sections of a questionnaire designed to focus on 26 important issues related to shift work. The shift expert is then constructed to provide prevention advice at the individual and organizational levels, and it prioritizes this advice using a fuzzy analytic hierarchy process model, which considers comparison matrices provided by users during the prioritization process. An empirical study of 61 workers working on three rotating shifts is performed. After administering the questionnaires, the collected data are analyzed statistically, and then the shift expert produces individual and organizational recommendations for these workers.     

成品油站场工艺管道风险辨识与评价

为保障成品油站场工艺管道的安全平稳运行,在充分辨识风险因素的前提下,提出了一种基于KENT法和RBI的风险评价方法。首先,以风险机理分析为基础,采用SHEL模型从导致风险上升的直接原因（风险内因）和间接原因（风险外因）2个角度辨识了风险因素,并细化各因素指标项;然后借鉴KENT法,对各指标项进行评分量化;依据RBI法,采用风险外因体系修正风险内因体系的方式确定失效可能性;综合环境后果、人员后果与商业后果,明确失效后果的评价体系与计算方法;最后,结合失效可能性与失效后果进行风险评价,从风险等级和风险排序2方面为检维修决策提供依据。应用表明:该评价方法便于工艺管道风险评价的基层实施,可为基于风险的检维修决策提供有效技术支撑。     

基于GPR-TOPSIS方法的充填配比多目标多属性优化

为获得某金矿尾砂胶结充填材料最优配比,基于试验结果,以海水比例、灰砂比和料浆质量浓度为输入参数,以充填体强度、塌落度及泌水率为输出参数,建立了充填配比与其响应量的高斯过程回归模型,分析了不同因素对充填性能的影响程度;采用遗传算法对高斯过程回归模型进行多目标参数优化,获得了Pareto非劣解,在此基础上,引入多属性决策的TOPSIS法对Pareto非劣解进行方案优选,确定了充填最优配比。研究结果表明:高斯过程回归模型相对误差值均小于6%,可靠性高;灰砂比及料浆质量浓度对充填性能影响较为显著,采用海水作为充填水源将降低充填体的强度;经优化后的充填配比与试验结果相符。     

Fe2+EDTA溶液络合-铁还原脱除烟气中NO

提出了“Fe2 螯合剂络合-铁粉还原-酸吸收”回收法脱除烟气中NO的新工艺,重点研究了模拟烟气中O2体积分数对NO络合量的影响,以及铁粉用量、铁粉粒径、搅拌速度对NO脱除效率的影响,确定了最佳的铁粉脱氮工艺条件,并对铁粉和铁屑的脱氮效果进行了比较。结果表明,烟气中O2的体积分数从0%增加到4.2%,NO络合量下降90.2%;NO脱除效率随铁粉用量和反应器搅拌速度的增加而增加,随铁粉粒径的增加而降低;过程的最佳工艺参数为,铁粉用量0.8g,铁粉粒径≤0.077mm,搅拌速度900r·min-1,在此条件下,对O2体积分数为5%的模拟烟气在搅拌反应器中可取得90%以上的NO脱除效率;用铁粉在1台搅拌反应器中取得的NO脱除效率和用铁屑在2个鼓泡反应器串联时所取得的效率相当。     

活性污泥过程数学模型进展

介绍了活性污泥过程模型ASM1，ASM2及ASM3的建模方法，并分析了各模型的微生物学基础。