三维叠前时间偏移技术在江苏WZD地区的应用

当地下地质构造复杂、断裂发育,横向速度变化不是太剧烈的情况下,提高偏移成像精度,三维叠前时间偏移是一种行之有效的方法。三维叠前时间偏移取得成功的关键:一是高保真、高信噪比的叠前数据;二是建立一个合理的三维偏移速度场。随着计算机性能的不断提高,三维叠前时间偏移逐渐成为常规处理技术,该技术在江苏油田WZD地区得到了广泛的应用,实际资料处理结果及钻探效果证实了三维叠前时间偏移技术是解决WZD地区复杂构造成像精度的一种好方法。     

炼油污水回用方案初探

针对污水处理场改造后的水质情况，结合现有闲置设备的状况，提出一套既符合现场实际又有针对性的污水回用处理方案。     

生物滤池挂膜的生产实践

通过能生物滤池挂膜的工程实践的论述，阐述了生物膜法处理工艺挂膜的机理，并深入分析了在挂膜过程中的一些影响因素，取得了一些相关的运行数据，很好的指导了生产。     

Antenatal diagnosis and palliative treatment of non-immune hydrops fetalis secondary to fetal parvovirus B19 infection

Hydrops fetalis was diagnosed at 22 weeks. An ultrasound examination demonstrated cardiomegaly and a fetal blood specimen obtained by cordocentesis revealed thrombocytopenia, anaemia, and neutropenia. Fetal paracentesis yielded straw-coloured fluid with electrolytes indicative of a transudate. Non-enveloped icosahedral viral particles approximately 23 mm in diameter were visualized in the ascitic fluid by electron microscopy. Immune electron microscopy confirmed human parvovirus B19. Direct fetal digitalization led to a reduction in umbilical artery resistance, a decline in the abdominal circumference from 20·3 to 17·8 cm, and resolution of the ascites within 72 h. Despite this dramatic response to therapy, fetal death occurred on day 5 of treatment. The initial maternal serum was positive for anti-B19 IgM and IgG antibodies. Electron microscopy of fetal cardiac tissue obtained post-mortem revealed intranuclear viral particles typical of B19, confirming the antenatal diagnosis of myocarditis. This case demonstrates that direct viral identification is applicable to prenatal diagnosis. To our knowledge, this is the first reported case of the antenatal diagnosis and palliative treatment of fetal viral infection.     

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

A novel La-Co-O-C (LC-C) composites were prepared via a facile co-hydrothermal route with oxides and glycerol and further optimized for methane catalytic activity and thermal stability via component regulation. It was demonstrated that Co₃O₄ phase was the main component in regulation. The combined results of X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of oxygen (O₂-TPD), temperature-programmed reduction of hydrogen (H₂-TPR), temperature-programmed desorption of ammonia/carbon dioxide (NH₃/CO₂-TPD) revealed that component regulation led to more oxygen vacancies and exposure of surface Co²⁺, lower surface basicity and optimized acidity, which were beneficial for adsorption of active oxygen species and activation of methane molecules, resulting in the excellent catalytic oxidation performance. Especially, the (3.5)LC-C (3.5 is Co-to-La molar ratio) showed the optimum activity and the T₅₀ and T₉₀ (the temperature at which the CH₄ conversion rate was 50% and 90%, respectively) were 318 and 367°C, respectively. Using theoretical calculations and in situ diffuse reflection infrared Fourier transform spectroscopy characterization, it was also found that the catalytic mechanism changes from the “Rideal-Eley” mechanism to the “Two-term” mechanism depending on the temperature windows in which the reaction takes place. Besides, the use of the “Flynn-Wall-Ozawa” model in thermoanalytical kinetics revealed that component regulation simultaneously optimized the decomposition activation energy, further expanding the application scope of carbon-containing composites.     

生活污水对蝌蚪红细胞微核及核异常的诱导

利用青蛙蝌蚪红细胞微核试验,检测了城市生活污水处理厂各级处理工艺出水的诱变活性。在l6d生话污水处理的实验中,青蛙蝌蚪红细胞微核细胞率及核异常率2d后就呈现统计上的显著增加,并随暴露时间的延长而增高,第8天达到最大值。在不同浓度混合污水暴露实验中,蝌蚪红细胞微核细胞率和核异常率呈现明显的剂量依赖性增加。实验结果表明:城镇生活污水具有较强的诱变活性,一级和二级处理工艺出水也具有一定的诱变活性。现有污水处理工艺有待于进一步改进。     

纳米复合GeO2/TiO2的制备及光催化性能研究

采用改进的Sol-gel方法,制备了一种新型的单分散椭球形微孔结构的纳米GeO2/TiO2复合光催化剂,并用TG-DTA、XRD、XPS、UV-vis、FT-IR、TEM、BET等手段进行了表征.以难生化降解的染料罗丹明B为目标降解物,采用HPLC测定不同光照时间下催化剂对染料降解的情况,考察了催化剂的光催化活性结果表明,改进的Sol-gel法制得的复合光催化剂具有明显的孔结构,而且比表面积大、粒径小、粒径分布窄、分散性好;与适量GeO2复合后能够有效提高TiO2纳米粒子的光催化活性;复合光催化剂的最佳制备条件为GeO2摩尔含量为0.1%,煅烧温度为400℃,所制得的GeO2/TiO2光催化活性比纯TiO2有显著提高.     

高浓度Cl-水样CODcr的测定

阐述了高浓度Cl-水样,以铬酸钾做指示剂,加入适量的硝酸银,形成AgCl沉淀,消除了Cl-的干扰,再用离心沉淀机充分沉淀,取上清液,用COD快速测定仪测定CODcr,有很高的准确度,符合测定要求.     

活性焦的改性及其脱硫性能的研究

以褐煤为主要原料制备的活性焦 ,经过改性后的一系列特性及脱硫效果 ,与纯活性焦进行了比较 ,是一种机械性能好、脱硫效率高、易再生的改性活性焦。为烟气脱硫提供一种新的吸附剂     

Ag/Al2O3催化剂用于碳氢化合物选择性还原NO

比较了富氧条件下CH4、C3H8、C3H6和C2H5OH分别用作还原剂时,NO在Ag/Al2O3催化剂上的还原活性.结果表明, CH4和C3H8还原NO的活性很低,而C3H6和C2H5OH能有效地还原NO.在此基础上,研究了H2O和SO2对C3H6和C2H5OH在Ag/Al2O3催化剂上还原NO活性的影响.结果表明,H2O的存在会降低低温区的NO还原活性,而且这种影响是可逆的.将H2O 和SO2同时加入反应混合气,引起NO还原活性较大幅度降低,结合程序升温脱附实验结果,认为可能是由于存在SO2时,Ag/Al2O3催化剂吸附NO的能力降低.