预浓缩与GC-MS联用分析垃圾填埋场恶臭气体

采用预浓缩与气相色谱-质谱联用,建立了垃圾填埋场几种恶臭气体的分析方法。该法用SUMMA罐采集垃圾填埋场臭气,经预浓缩系统冷凝浓缩后,用GC-MS分析测定。几种臭气的检出限均低于3.0×10-3mg/m3,经6次重复测定,其相对标准偏差低于10%。该法已用于西安市江村沟垃圾填埋场臭气的采样分析。该法的应用增强了西安市对臭气的监测分析能力。     

兰州市大气污染特征与污染预报技术研究

结合兰州市大气污染特征,采用国际上较为先进的污染预报模式,分别建立了实时资料与数值产品相结合的实用统计预报模型.其系统预报结果准确程度较好,实用性强,时研究兰州市大气污染来源及政府决策都起着重要的作用.     

亚铵法制浆造纸厂中段废水处理技术分析研究

通过对采用两级气浮做预处理 ,生物硫化床串联接触氧化做深度处理的治理技术的分析研究 ,结合废水处理工程实例 ,说明了用两级串联气浮 +硫化床 +接触氧化工艺处理造纸中段水技术切实可靠 ,该治理工艺对处理亚铵法麦草制浆造纸中段废水有较强的针对性和可行性。     

粪大肠菌群多管发酵测定法的改进研究

对地表水和废水中粪大肠菌群目前通用的多管发酵检测方法进行优化。将水样接种至乳糖蛋白胨培养液后,在44.5℃±0.5℃培养箱中培养24h记录结果,并与优化前的方法进行对比。结果表明,改进后的方法在时间上比改进前节省了约24~48小时,但两者在结果上无统计学意义的差别。多管发酵改进法可以用于地表水和废水中粪大肠菌群的检测。     

示踪气体法测定室内空气新风量的测量不确定度评定

主要根据《测量不确定度评定与表示》JJF1059-1999,针对开展的室内环境检测项目——室内空气新风量的测量,进行了不确定度分析。     

Development of inherent safety and health index for formulated product design

The numerous formulated products which are introduced to the market consist of chemical ingredients that may cause various safety and health hazards to the consumers. Therefore, it is extremely important to practice a systematic methodology to formulate products with acceptable safety and health performances. This work presents an index-based methodology to assess the safety and health hazards of the ingredients during the early formulation stage of product design. Hence, new inherent safety and health sub-indexes are introduced to improve the current safety and health hazards that are needed in formulated product design. The inherent safety and health sub-indexes are assigned with scores based on the degree of potential hazards. A higher score indicates a higher safety risk or severe health effect, and vice versa. The proposed methodology will greatly assist the users to identify the adverse safety and health effects caused by the ingredients. Hence, it is pivotal to eliminate or reduce the safety and health impacts from product usage. A case study on common ingredients used in the formulation of paint is presented on this study to describe the proposed method.     

ACCOUNTING FOR DISCREPANCIES IN PAN EVAPORATION CALCULATIONS1

ABSTRACT: Four experiments were made to document and account for differences in evaporation data that were calculated using pans equipped with float-activated recorders and pans with hook gauge/rain gauge instrumentation. Paired in-pan comparisons indicated that evaporation differences were not due to the technique of measuring water level within the pan. Also, the recorder float-lag did not account for the differences. By sampling rainfall events, it was found that evaporation pans and standard (8 in. orifice) rain gauges record significantly different amounts of rain, which results in differences in calculated evaporation on rainy days. Monitoring networks with evaporation pans should have uniform instrumentation that accurately records rainfall into the pans for consistent results.     

污水回用处理技术现状分析

概括地介绍了污水回用的国内外发展现状，水质标准以及处理技术，并对其效益作了简要分析。     

新型低造价小钻头冷挤压工艺的研究

根据该新型钻头的特点 ,分析了采用机加工方法成形时存在的问题 ,明确指出冷挤压方法才是其可行的成形工艺 ,研究了其整个制造工艺流程。特别对其冷挤压工艺进行了深入研究。     

炼油污水达标排放存在问题与对策

针对洛阳石化总厂炼油污水影响达标的主要因素，进行了简要分析，并就解决COD、氨氮、悬浮物等问题的对策，提出了建议。