组织残留法在水生生物基准中的应用概述

水生生物基准已成为生态风险评价和水环境管理的主要参考依据,在水污染治理、控制和管理以及水生生物保护方面发挥着重要作用。环境和生物学参数对基于水体或沉积物等外暴露浓度的毒性阈值和环境基准存在影响,使其具有变异性和不确定性。而基于组织残留的毒性剂量指标可以减少毒性值的变异性以及不确定性,特别是对于生物累积性物质而言,在毒性效应及环境基准研究中存在显著优势。针对组织残留法在水生生物基准研究中的应用,对组织残留法的概念、优势、应用,以及组织残留基准的推导方法等几个方面进行了综述,并提出了组织残留法在应用中存在的关键问题及建议,旨在推动环境基准、生态风险评价理论和方法的研究,以及为水环境管理和污染防治提供技术支持。     

Removal of formaldehyde over MnxCe1-xO2 catalysts: Thermal catalytic oxidation versus ozone catalytic oxidation

MnxCe1- xO2（x： 0.3–0.9） prepared by Pechini method was used as a catalyst for the thermal catalytic oxidation of formaldehyde（HCHO）. At x = 0.3 and 0.5, most of the manganese was incorporated in the fluorite structure of Ce O2 to form a solid solution. The catalytic activity was best at x = 0.5, at which the temperature of 100% removal rate is the lowest（270°C）. The temperature for 100% removal of HCHO oxidation is reduced by approximately 40°C by loading 5 wt.% Cu Oxinto Mn0.5Ce0.5O2. With ozone catalytic oxidation, HCHO（61 ppm） in gas stream was completely oxidized by adding 506 ppm O3 over Mn0.5Ce0.5O2 catalyst with a GHSV（gas hourly space velocity） of 10,000 hr-1at 25°C. The effect of the molar ratio of O3 to HCHO was also investigated. As O3/HCHO ratio was increased from 3 to 8, the removal efficiency of HCHO was increased from 83.3% to 100%. With O3/HCHO ratio of 8, the mineralization efficiency of HCHO to CO2 was 86.1%. At 25°C, the p-type oxide semiconductor（Mn0.5Ce0.5O2） exhibited an excellent ozone decomposition efficiency of 99.2%,which significantly exceeded that of n-type oxide semiconductors such as Ti O2, which had a low ozone decomposition efficiency（9.81%）. At a GHSV of 10,000 hr-1, [O3]/[HCHO] = 3 and temperature of 25°C, a high HCHO removal efficiency（≥ 81.2%） was maintained throughout the durability test of 80 hr, indicating the long-term stability of the catalyst for HCHO removal.     

铈插层黏土负载铁催化剂在H2S选择性催化氧化过程中催化性能的研究

合成了铈插层的Laponite黏土材料(Ce-Lap),并以此材料为载体,分别负载质量分数为3%、5%、8%、10%的Fe制备Fe/Ce-Lap催化剂,通过XRD、氮气吸脱附曲线、XRF、TG、FT-IR、O2-TPD、H2-TPR、XPS等手段,对催化剂的物理化学性质进行了表征测试,并考察了催化剂在H2S选择性催化氧化反应过程中的活性.结果表明,5%的Fe/Ce-Lap在180℃时表现出最好的催化活性,能达到96%的硫产率,这归因于Fe与Ce之间的相互作用,改善了Fe3+的氧化还原能力.此外,较高的氧吸附能力及铁物种的高分散度促进了氧化反应的进行.     

Combination of heterogeneous Fenton-like reaction and photocatalysis using Co-TiO2 nanocatalyst for activation of KHSO5 with visible light irradiation at ambient conditions

A novel coupled system using Co–Ti O2 was successfully designed which combined two different heterogeneous advanced oxidation processes, sulfate radical based Fenton-like reaction（SR-Fenton） and visible light photocatalysis（Vis-Photo）, for degradation of organic contaminants. The synergistic effect of SR-Fenton and Vis-Photo was observed through comparative tests of 50 mg/L Rhodamine B（Rh B） degradation and TOC removal. The Rhodamine B degradation rate and TOC removal were 100% and 68.1% using the SR-Fenton/Vis-Photo combined process under ambient conditions, respectively. Moreover, based on XRD, XPS and UV-DRS characterization, it can be deduced that tricobalt tetroxide located on the surface of the catalyst is the SR-Fenton active site, and cobalt ion implanted in the Ti O2 lattice is the reason for the visible light photocatalytic activity of Co–Ti O2. Finally, the effects of the calcination temperature and cobalt concentration on the synergistic performance were also investigated and a possible mechanism for the synergistic system was proposed. This coupled system exhibited excellent catalytic stability and reusability,and almost no dissolution of Co2＋was found.     

电喷汽油机燃用乙醇/汽油混合燃料排放及催化转化特性研究

研究多点电喷汽油机燃用不同掺混比的乙醇/汽油混合燃料时的排放及催化器的转化性能.结果表明,在汽油机参数未做任何调整的情况下,与汽油机相比,乙醇/汽油混合燃料汽油机催化器之前的CO排放降低,降幅接近15%;HC排放在大负荷时略有升高;NOx排放基本相同;乙醇对排放物催化转换效率的影响与电喷汽油机的转速、负荷和空燃比控制策略有关.用气相色谱分析仪测录的未燃乙醇排放在大负荷时略有升高,甲醇排放量变化不大,乙醛排放量随乙醇含量增大而增大,经三效催化转化器后,可以被控制在接近零排放的水平.在怠速工况,随乙醇含量增加,CO、HC和NOx的排放与汽油机相比略有降低.     

羟基氧化铁催化臭氧氧化对滤后水卤乙酸生成势的影响

考察了滤后水经过单独臭氧氧化和羟基氧化铁(FeOOH)催化臭氧氧化后5种卤乙酸生成势(HAA5FP)的生成情况.研究了氧化时间、溴离子浓度、滤后水pH值、碱度和O3投量对2种氧化方式下HAA5FP的影响规律.发现该滤后水氯化后的HAA种类为二氯乙酸(DCAA)、三氯乙酸(TCAA)及溴离子存在时有二溴乙酸(DBAA).无溴离子存在时,催化臭氧氧化在5～20min内使得HAA5FP比臭氧氧化后的降低9.5%～18.3%.溴离子浓度增加使HAA5FP减少,催化臭氧氧化后HAA5FP也比臭氧氧化后低更多.中性pH时,催化臭氧氧化比臭氧氧化有更明显的控制HAA5FP的优势.重碳酸盐碱度升高使HAA5FP降低,且2种氧化后HAA5FP的差别减小.O₃/TOC比值为0.45～1.43的臭氧投量范围内,催化臭氧氧化后HAA5FP比臭氧氧化后减少11.2%～28.0%.催化臭氧氧化对滤后水HAA5FP的影响与FeOOH催化臭氧生成羟基自由基的特点密切相关.     

改性贵金属催化剂催化还原脱除NO

含有NO的工业废气直接排放会严重污染空气,须对含有NO的工业废气进行净化处理.采用NH3为还原剂贵金属铂催化剂进行了低温还原NO脱除烟气中氮氧化物性能的研究.结果表明:实验室制备的贵金属铂催化剂具有高的低温活性和选择性催化还原脱除NO的性能,但该催化剂易被原料气中少量的硫化物(SO₂)中毒而影响其稳定性;用稀土元素La和Ce对贵金属铂催化剂进行改性,改性后贵金属铂催化剂的稳定性得到了大幅度提高,出口气体中氮氧化物浓度大幅度降低.本实验Pt∶La∶Ce最佳摩尔比为1∶3.78∶3.56.     

臭氧/纳米TiO2催化氧化去除水中微量硝基苯的研究

在悬浮颗粒搅拌混合反应器中,研究了臭氧/纳米TiO₂催化氧化去除水中微量硝基苯的性能,结果表明,纳米TiO₂催化臭氧化去除硝基苯较单独臭氧氧化有明显的提高,反应20min硝基苯的去除率提高了44%.实验中分别考察了纳米TiO₂热处理温度、催化剂投量、臭氧投量、硝基苯初始浓度、pH值对臭氧/纳米TiO₂催化氧化去除硝基苯的影响.发现550℃烧结得到的纳米TiO₂表现出最好的催化臭氧化活性,在较低的臭氧投量与催化剂用量条件下,硝基苯的去除率可达到56.57%;增大臭氧或者硝基苯的初始浓度,硝基苯的去除率随之提高;但是改变催化剂投量,硝基苯的去除效果几乎不受影响;中性或碱性pH环境利于纳米TiO₂催化臭氧化反应的进行.通过研究叔丁醇对纳米TiO₂催化臭氧化反应的影响,证明反应遵循羟基自由基(·OH)反应机理.     

Preparation and characterization of Fe2O3-CeO2-TiO2/γ-Al2O3 catalyst for degradation dye wastewater

In order to develop a catalyst with high activity for catalytic wet oxidation （CWO） process at room temperature and atmospheric pressure, Fe2O3-CeO2-TiO2/γ-Al2O3 catalyst was prepared by consecutive impregnation method and the prepared parameters were optimized. The structure of the catalyst was characterized by BET, XRF, SEM and XPS technologies, and the actual wastewater was used to investigate the catalytic activity of Fe2O3-CeO2-TiO2/γ-Al2O3 in CWO process. The experimental results showed that the prepared catalyst exhibited good catalytic activity when the doping amount of Ti was 1.0 wt% （the weight ratio of Ti to carriers）, and the middle product, Fe2O3-CeO2-TiO2/γ-Al2O3, was calcined in 450℃ for 2 h. The CWO experiment for treating actual dye wastewater indicated that the COD, color and TOC of actual wastewater were decreased by 62.23%, 50.12% and 41.26% in 3 h, respectively, and the ratio of BOD5/COD was increased from 0.19 to 0.30.     

Biosorption of copper, zinc, cadmium and nickel by Chlorella vulgaris

The sorption capacity of the microalga, Chlorella vulgaris, was investigated using different metals (Cu, Zn, Cd and Ni), in both monometallic and bimetallic solutions. The final metal concentrations were significantly low. In the case of copper, an acid pretreatment (at pH 3) of the biomass was required to avoid an excessive increase in pH and the subsequent precipitation of metal during tests. This pretreatment was not necessary for the rest of the metals. The study of the influence of pH led to a greater metal uptake at a higher pH, suggesting a clear competition between metal cations and protons during the biosorption process. The biomass concentration was also a relevant variable, and the best sorption capacities were achieved at the lowest biomass concentration. pH also had a great influence on the elution of the metal retained by the biomass. The best recovery yields were obtained for the lower pH of the eluent solution. Sorption isotherms were well fitted to the Langmuir model, for both single-metal and two-metal systems. In both cases, the biomass showed a greater affinity for Cd.