次氯酸钠处理终冷水中氰化物硫化物的研究

以次氯酸钠为氧化剂,用正交实验研究了次氯酸钠处理终冷水中氰化物和硫化物,得出正交实验中各因素的主次关系及对除氰除硫的影响。研究结果表明,反应体系的pH是影响脱氰脱硫的重要因素。在最佳处理条件,即pH为10．0,反应温度为25℃,投氯量系数为1．4,反应时间为45min．能使氰化物的质量浓度降至0．267mg／L,脱氰率高达99．8％,硫化物的质量浓度降到0．387mg／L,脱硫率达92．0％,达到≤0．5mg／L的国家排放标准。文章还对工业化提出了一些设想。     

超声-Fenton法对沼液中3种四环素类和3种磺胺类抗生素氧化去除的研究

近年来,各类抗生素被广泛用于畜禽养殖,并经动物代谢后随粪便和尿液排出体外.代谢物通过沼气工程处理后,得到的沼液又多用于灌溉,使得抗生素进入环境被农作物吸收,进而通过食物链的传递对人体产生危害,因此,沼液中抗生素的去除就显得尤为重要.本文选择畜禽养殖中使用较多的6种抗生素作为目标物质,采用超声-Fenton氧化技术进行去除.通过设置单因素实验考察了超声能量密度、H_2O_2浓度、pH值、n(H_2O_2)/n(Fe~(2+))对抗生素去除的影响,并利用响应曲面法研究了各个因素的交互性影响,拟合出去除抗生素的最优条件.结果表明,通过单因素试验筛选出的最佳反应条件为:pH=4,H_2O_2浓度为0.04 mol·L~(-1),n(H_2O_2)/n(Fe~(2+))=10,超声能量密度为0.050 kW·L~(-1),在此条件下四环素、土霉素、金霉素、磺胺甲恶唑、磺胺甲基嘧啶、磺胺嘧啶的去除率分别为91.90%、93.65%、86.09%、87.30%、77.54%、88.21%;再经由响应曲面法进一步优化实验方案得出优化条件为:pH=3.80,H_2O_2浓度为0.04 mol·L~(-1),n(H_2O_2)/n(Fe~(2+))=10.9,超声能量密度为0.055 kW·L~(-1),在此条件下四环素、土霉素、金霉素的去除率分别为92.04%、94.23%、88.46%,磺胺甲恶唑、磺胺甲基嘧啶、磺胺嘧啶的去除率分别为87.98%、80.78%、89.58%,养分TN、TP、TK的保留率分别为99.1%、98.6%、100.2%.可见,超声-Fenton氧化法对沼液中抗生素的去除效果良好,同时又可保留其养分.响应曲面法对优化超声-Fenton氧化去除沼液中的抗生素具有实际应用价值,这为沼液中抗生素的去除提供了一条可能的途径.     

不同钝化剂对土壤有效态铅和镉含量的影响

通过向土壤中添加蚕沙、熟石灰和磷酸二氢钾,研究不同钝化处理对土壤有效态重金属含量、pH值及有机质含量的影响.结果表明:添加蚕沙和熟石灰都能使土壤中高植物有效挂的有效态Pb和有效态Cd大幅下降;其中以单施蚕沙处理效果最优,其对Pb和Cd的钝化效率分别达到36.5％和39.2％,而蚕沙+熟石灰处理钝化效果次之,分别为24.3％和26.9％.磷酸二氢钾的钝化作用不明显.添加熟石灰对土壤pH值影响最大,而蚕沙大幅增加了土壤中有机质含量.经统计分析,土壤pH值、有机质含量都与土壤有效态Pb、Cd含量之间呈负相关,说明通过提高土壤pH值及有机质含量,降低土壤重金属活性是土壤重金属钝化的主要机理.     

竹炭-微生物联合法对沼液中氨氮的去除

采用竹炭-微生物联合法,考察了竹炭用量、菌液用量、进水氨氮浓度、pH、DO、HRT等因素对氨氮废水处理效果的影响;同时采用对比实验,初步探讨了竹炭-微生物联合法处理沼液的作用机理。结果表明,竹炭-微生物法去除沼液氨氮的最优条件推荐为:竹炭用量30 g/L,微生物活性液用量3%,pH 7.0～8.0,DO为2 mg/L,HRT为48 h。竹炭-微生物法对沼液氨氮的去除过程可用一级反应动力学模型C=272.56e-0.0148描述,其去除效果来源于竹炭吸附和生物降解的协同作用,协同程度为48.45%。     

LY12CZ铝合金腐蚀损伤的概率分布及其变化规律

采用铜加速乙酸盐雾试验方法对LY12CZ铝合金腐蚀行为进行了研究。结果表明：腐蚀深度服从Gumbel分布、正态分布、威布尔分布和对数正态4种分布。选用正态分布描述了LY12CZ铝合金在盐雾环境下的腐蚀损伤的分布特性,并得出了不同置信度和可靠度下腐蚀深度随时间变化的规律。     

不同填料人工湿地处理系统的净化能力研究

研究了沸石、沸石－石灰石、石灰石3种填料的人工湿导的净化能力。结果表明：（1）沸石和石灰石混合使用，不会降低沸石吸附氨氮的能力；（2）沸石可促使难溶性P的释放，使得石灰石吸附P被植物和微生物吸收利用；（3）沸石和石灰石发生了协同作用，对TN、TP的去除效果均好于其单独使用。     

Performance of a large-scale greenhouse solar dryer integrated with phase change material thermal storage system for drying of chili

ABSTRACT

Large-scale greenhouse solar dryers have been used for drying various products and this type of dryer is usually equipped with LPG burner as auxiliary heater, which creates more operating cost. To overcome this problem, phase change material (PCM) thermal storage was proposed to substitute for the LPG burner. In this work, the performance of a large-scale greenhouse solar dryer integrated with a PCM as a latent heat storage for drying of chili was investigated. Experimental studies were conducted to compare the performance of this dryer with that of another large-scale greenhouse solar dryer without the PCM thermal storage and open sun drying. Chili with an initial moisture content of 74.7% (w.b.) was dried to a final moisture content of 10.0% (w.b.) in 2.5 days, 3.5 days, and 11 days using the solar dryer integrated with the PCM thermal storage, the solar dryer without the PCM thermal storage and the open sun drying, respectively. The performance of the solar dryer integrated with the PCM thermal storage was also evaluated using exergy analysis. The exergy efficiency of the drying room of the solar dryer integrated with the PCM thermal storage and the solar dryer without the PCM thermal storage for drying of chili was found to be 13.1% and 11.4%, respectively and the thermal storage helps to dry chili during adverse weather conditions. The results of exergy analysis implied that the exergy losses from the dryer with the PCM should be reduced.     

Experimental and DFT insights into nitrogen and sulfur co-doped carbon nanotubes for effective desulfurization of liquid phases: Equilibrium & kinetic study

• Synthesis of NS-CNTS is used in a high desulfurization performance. • Synthesizing NS-CNT is considered as a novel adsorbent from low-cost precursors. • A high sulfur removal capacity for NS-CNT is attained compared with recent works. Herein, nitrogen and sulfur co-doped carbon nanotubes (NS-CNT) adsorbents were synthesized via the chemical vapor deposition technique at 1000°C by employing the camphor, urea and sulfur trioxide pyridine. In this study, desulfurization of two types of mercaptans (dibenzothiophene (DBT) and tertiary butyl mercaptan (TBM) as nonlinear and linear forms of mercaptan) was studied. In this regard, a maximum capacity of NS-CNT was obtained as 106.9 and 79.4 mg/g and also the removal efficiencies of 98.6% and 88.3% were achieved after 4 h at 298K and 0.9 g of NS-CNT for DBT and TBM, respectively. Characterization of the NS-CNTs was carried out through exploiting scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and elemental analysis (CHN). The isotherm equilibrium data could be ascribed to the Freundlich nonlinear regression form and the kinetic data was fitted by nonlinear form of the pseudo second order model. The negative values of ΔS⁰, ΔH⁰ and ΔG⁰ specify that the adsorption of both types of mercaptans was a natural exothermic process with a reduced entropy. Maintenance of more than 96% of the adsorption capacity even after nine cycles suggest the NS-CNT as a superior adsorbent for mercaptans removal in the industry. Density functional theory (DFT) calculations were also performed to peruse the effects of S/N co-doping and carbon monovacancy defects in CNTs toward the adsorption of DBT and TBM.     

清洁汽油生产过程中的蒸馏技术

汽油中的硫会增加汽车尾气中有害物质的排放，世界各国相继制定了越来越严格的规定，限制汽油中的硫含量。加氢技术虽然能够显著降低汽油中的硫含量，但却存在着烯烃饱和而导致辛烷值损失和氢耗高的问题。将汽油切割成不同的馏分段，根据其各自的组成特点选择不同的脱硫工艺，为这一问题提供了经济可行的解决方案。并针对汽油中硫和烯烃的分布特点，对不同汽油切割方案及蒸馏技术进行了分析。     

桩基工程泥浆水处理技术

通过一系列不同类型的絮凝剂的试验，发现高分子量的ＨＰＡＭ对桩基工程泥浆水的脱水最有效。对真空吸滤、压滤和离心３种干化工艺进行了比较试验，认为化学絮凝与物理离心脱水干化相结合的处理工艺在桩基工程施工现场具有广阔的开发应用前景。