磷渣-粉煤灰基地聚物材料固化含砷废渣

为了处理有色金属冶炼厂产生的含砷废渣,利用磷渣-粉煤灰基地聚物材料对其进行固化处理。在磷渣：粉煤灰=60：40的基础上,通过单因素实验考察了石灰的掺量、化学激发剂水玻璃的模数及掺量、含砷废渣掺量等因素对砷固化体力学性能及砷毒性浸出特性的影响。结果表明：石灰外掺掺量为10%,水玻璃的模数为M=1.2,且其掺量为4%时,砷固化体的抗压强度和As毒性浸出浓度等指标综合效果达到最佳,地聚物材料对含砷废渣的最大固化容量为34%,其固化体抗压强度可达13.6 MPa,砷毒性浸出浓度为2.4 mg·L-1,满足危险废弃物堆存国家标准要求。通过XRD、SEM等手段分析可以得出,固化后砷通过化学键合的方式变成难溶盐的形式被地聚物材料牢牢地包裹,结构更加密实。     

Dicarboxylic acid concentration trends and sampling artifacts

Dicarboxylic acids associated with airborne particulate matter were measured during a summer period in Philadelphia that included multiple air pollution episodes. Samples were collected for two 10 h periods each day using a high-volume sampler with two quartz fiber filters in series, and analyzed by gas chromatography mass spectrometry (GCMS) with diazomethane derivatization. Among the dicarboxylic acids investigated, phthalic acid and adipic acid exhibited the greatest diurnal variations and the strongest linear relationship with maximum daily ozone concentration. Dicarboxylic acids and ozone concentration exhibited a poor linear relationship with organic to elemental carbon ratio. All species investigated were affected by significant sampling artifact errors at low concentrations, but sampling errors were negligible at high concentrations observed during ozone episodes.     

玻纤布上胶车间有机溶剂废气净化处理

介绍了工厂有机溶剂废气处理方案和设计及实际运行效果,具有简单经济、净化彻底的特点.     

活性炭吸附室内空气中挥发性有机化合物

活性炭吸附室内空气中挥发性有机化合物的１０％穿透时间与气相浓度及挥发性有机化合物的种类有关,通过对苯、甲苯和丙酮的实验研究,得出了由高浓度估算室内低浓度时炭床１０％穿透时间的经验公式ｔｂ,１＝ｔｂ,ｈ（Ｃ０,１／Ｃ０,ｈ）＾ａ,其中ａ值是与炭床性能及挥发性有机化合物种类有关的参数,可通过实验确定。     

The evolution of mass balance models of persistent organic pollutant fate in the environment

Current approaches to modelling the fate of persistent organic pollutants (POPs) in the environment have evolved in response to four dominant characteristics of these substances; namely: (1) the presence of POPs in virtually all environmental phases and the ease with which they move from one to the other requires multi-compartmental modelling. Describing transport across phase boundaries becomes as, or even more, important as quantifying transport within the phases; (2) POPs may persist in the environment for many decades. For chemicals that 'have time', concepts such as equilibrium partitioning and steady-state become more important than for short-lived substances whose fate is more controlled by the rates of transformation; (3) measuring POPs is difficult and expensive and observed concentrations of POPs are not available in high spatial or temporal resolution. Consequently, high resolution tends not to be a high priority in POP models; and (4) detrimental effects of POPs often manifest themselves in top predators, which has led to a focus on modelling biotic uptake and transfer within food chains. The task of building a POPs model is viewed as combining the four 'building blocks' of partitioning, transport, transformation and source data with the help of the law of the conservation of mass. Process models, evaluative models, models of real local, regional and global fate, as well as biological uptake models are presented and references to numerous examples are provided. An attempt is made to forecast future directions in the field of POPs modelling. It is expected that modelling techniques that do not rely on quantitative emission estimates as well as approaches that take into account spatial, temporal and climatic variability as well as parameter uncertainty will increase in importance. Finally, the relationship between modelling POPs and models of other pollutant issues is addressed, as are potential interactions between POPs and pollutant issues such as eutrophication, acidification and global climate change.     

Organic residue decomposition: The minicontainer-system a multifunctional tool in decomposition studies

The Minicontainer-test, first described by Eisenbeis (1993), was designed to study the kinetics of organic residue decomposition at a microsite level. It is derived from the litterbag technique and consists of polyethylene minicontainers (volume about 1.5 cm³) filled with a test substrate (litter, straw, cellulose, etc.). The minicontainers (MCs) are closed at either end with plastic gauze discs of variable mesh size (e.g. 20 μm, 250 μm, 500 μm or 2 mm). A definite number of such units are inserted into PVC-bars, which can be implanted into the soil horizontally or vertically, or be exposed on the soil surface horizontally. The bars are very stable and can be exposed in different environments for months to years. If required, the bars can be removed temporarily and stored, e.g. during soil cultivation. Should fresh litter be used, two phases of decomposition can be distinguished: a fast initial phase, which can be mainly related to the effect of leaching, and a second slow phase depending mainly on the activity of soil organisms and litter quality. Several questions can be addressed to investigations using MCs, e.g. 1) parts of the soil fauna which are involved in decomposition (nematodes, microarthropods, and smaller specimens of the macrofauna, e.g. enchytraeidae, diplopods and dipteran larvae) can be extracted from the litter substrate using a miniscale high gradient extractor, 2) the organic mass loss of litter can be determined, 3) microbial biomass (C_mic, N_mic) can be assessed by fumigation extraction and 4) microbial activity (respiration) in the test substrate can also be assessed by use of standardised methods. Compared to litterbag studies, the larger number of small replicate units improves the statistical evaluation. Until today the Minicontainer-test has been applied in forestry and agriculture, e.g. studying the effects of liming, soil restoration and the application of insecticides, e.g. Diflubenzuron (Dimilin) and Btk (Bacillus thuringiensis var.kurstaki).     

有机物的结构──活性定量关系及其在环境化学和环境毒理学中的应用

有机物的结构──活性定量关系及其在环境化学和环境毒理学中的应用王飞越（北京大学城市与环境学系，北京１００８７１）陈雁飞（武汉大学环境科学系）最近几十年来，有机物结构──活性定量关系研究（ＱＳＡＲ，ＱｕａｎｔｉｔａｔｉｖｅＳｔｒｕｃｔｕｒｅ－Ａｃｔｉｖ...     

沉积物原位物理洗脱技术对苦草萌发生长的影响

原位物理洗脱技术是一种应用于修复受污染的沉积物的新兴技术,但沉积物洗脱处理后对沉水植物萌发生长的影响尚不明确。通过模拟原位空气洗脱与原位水力洗脱2种典型原位物理洗脱技术,处理富含有机质的沉积物,研究洗脱对苦草萌发和生长指标的影响,以及洗脱后沉积物的理化性质的变化。结果表明:2种方式洗脱后沉积物中苦草种子的萌发率、萌发速度以及幼苗的株高、鲜质量、根数、叶数等指标均优于未洗组,其中水力洗脱后沉积物中苦草的萌发生长状况最好,萌发率是未洗组的2.9倍,株高和根数分别是未洗组的2.29和4.76倍;物理洗脱后,沉积物中氨氮($NH_{4}^{-}$-N)与酸可挥发性硫化物(AVS)等还原性物质浓度分别下降34.15%~35.19%和7.67%~44.89%,有机质浓度下降70.04%~77.90%,表层(0~5 cm)沉积物由强还原状态(ORP<-350 mV)改善至弱还原状态(ORP为-200~-100 mV);此外,沉积物中大粒径(50~2 000 μm)颗粒占比增至89.02%~92.84%,有利于上覆水中的O₂向沉积物中扩散,促进苦草的萌发生长。原位物理洗脱尤其是水力洗脱后,沉积物的理化条件更有利于苦草的萌发生长。     

Growth and alkaline phosphatase activity of Chattonella marina and Heterosigma akashiwo in response to phosphorus limitation

The growth and alkaline phosphatase activity (APA) of two raphidophyceae species Chattonella marina and Heterosigma akashiwo were investigated in response to P-limitation and subsequent addition of dissolved inorganic phosphorus (DIP, NaH₂PO₄) and two dissolved organic phosphorus (DOP) compounds: guanosine 5-monophosphate (GMP) and triethyl phosphate (TEP). APAlevels increased greatly after P-starvation as the decrease of the cellular phosphorus quotes (Q_p). C. marina responded to P-limitation quickly and strongly, with 10-fold increase in APA within 24 hr after P-starvation. The larger difference between maximal and minimal Q_p values in C. marina indicated its high capacity in P storage. APA of H. akashiwo wasmaximally enlarged about 2.5 times at 48 hr of P-starvation. After the addition of nutrients, cell numbers of C. marina increased in all treatments including the P-free culture, demonstrating the higher endurance of C. marina to P-limitation. However, those of H. akashiwo increased only in DIP and GMP cultures. APA increased only after the addition of the monophosphate ester GMP. The results suggest that quick responses of C. marina to P-limitation, high capacity in P storage as well as endurance for P-depletion provide this species an ecological advantage in phytoplankton community competition under DIP-limited conditions.     

有机污染场地原位热脱附工程尾水尾气的处理技术进展

污染场地原位热脱附过程不可避免地产生尾水尾气,其处理技术普遍存在工艺设计不成熟、污染物脱附规律认识不明晰、二次污染控制措施薄弱等问题,缺乏具有针对性的技术装备研发和应用指导。通过分析污染场地原位热脱附工程尾水尾气处理技术的应用现状、污染物脱附规律和现有专利情况,总结归纳实际工程应用中应注意的问题,进而提出原位热脱附工程尾水尾气处理工艺的设计和设备选型建议,并展望进一步的应用及研究,以期为我国有机污染土壤原位热脱附修复技术的推广和应用提供参考。