Integrated drying and incineration of wet sewage sludge in combined bubbling and circulating fluidized bed units

An original integrated drying and incineration technique is proposed to dispose of sewage sludge with moisture content of about 80% in a circulating fluidized bed. This system combines a bubbling fluidized bed dryer with a circulating fluidized bed incinerator. After drying, sewage sludge with moisture less than 20% is transported directly and continuously from the fluidized bed dryer into a circulating fluidized bed incinerator. Pilot plant results showed that integrated drying and incineration is feasible in a unique single system. A 100 t/d Sewage Sludge Incineration Demonstration Project was constructed at the Qige sewage treatment plant in Hangzhou City in China. The operational performance showed that the main operation results conformed to the design values, from which it can be concluded that the scale-up of this technique is deemed both feasible and successful.     

Sewage sludge drying by energy recovery from OFMSW composting: Preliminary feasibility evaluation

In this paper an original energy recovery method from composting is analyzed. The integrated system exploits the heat available from the aerobic biochemical process in order to support the drying of sewage sludge, using a specific solar greenhouse. The aim is to tackle the problem of organic waste treatment, with specific regard to food waste. This is done by optimizing the energy consumption of the aerobic process of composting, using the heat produced to solve a second important waste management problem such as the sewage waste treatment. Energy and mass balances are presented in a preliminary feasibility study. Referring to a composting plant with a capacity of 15,000 t/y of food waste, the estimation of the power from recovered heat for the entire plant resulted about 42 kW. The results demonstrated that the energy recoverable can cover part of the heat necessary for the treatment of sludge generated by the population served by the composting plant (in terms of food waste and green waste collection). The addition of a renewable source such as solar energy could cover the residual energy demand. The approach is presented in detail in order for it to be replicated in other case studies or at full scale applications.     

市政脱水污泥的间接干化动力学研究

以食用油为热介质,在不同油浴温度下,对市政脱水污泥进行间接干化试验,推导出间接干化动力学模型,并对收集的冷凝液进行水质分析。结果表明:冷凝液为高浓度有机废水,TOC占TC的比例为73.2010%~75.5983%;VFAs的主要组分是乙酸、丙酸、丁酸、异丁酸、异戊酸和正戊酸,其中异丁酸所占比例最高(45.597%),其次为丙酸(24.554%);通过动力学模型的参数估值,Z模型(n≠1)因高R~2值和低RSS值而能很好的预测间接干化过程。     

Studies on the Drying Characteristics of Zingiber Officinale Under Open Sun and Solar Biomass (Hybrid) Drying

Drying characteristics of Zingiber officinale (Ginger) under the open sun and direct type natural convection solar biomass (hybrid) drying were studied. It has been observed that under open sun drying conditions, the drying rate depends on the product thickness and climatic conditions. The results have been drawn for both the summer (April-May, 2004) and winter (November-January, 2003–04) months of Delhi, in India. In the hybrid drier, the ginger, with a thickness of 0.008 m, dried in 33 hours in comparison to 96 hours in open-sun drying. The overall drying efficiency of the hybrid drier was found to be 18% and 13% under summer and winter climatic conditions respectively. The loss of volatile oil content of the ginger is less in hybrid drier in comparison to open sun drying. It was found that the average drying air temperature of 60°C with average air velocity of 0.6m/sec was sufficient for the drying of ginger in the hybrid drier. Ginger quality after drying is better and drying time is less in the hybrid drier in comparison to open-sun drying. The hybrid drier is a simple device, which can be manufactured with locally available materials and can be used for drying of other spices, vegetables and fruits etc.     

冷原子吸收法测汞用干燥剂

试验了几种常用的干燥剂在冷原子吸收法测定水中汞时,对汞蒸气的干燥性能及对测定灵敏度的影响。结果表明,以无水氯化钙和无水高氯酸镁效果最好     

冷原子吸收法测汞用干燥剂的选择

冷原子吸收法测定样品中汞含量时,需要对汞蒸气进行干燥,本文就实验中常用的几种干燥剂的性能以及不同的干燥剂对方法灵敏度的影响进行了实验和探讨。     

Transformation of phosphorus during drying and roasting of sewage sludge

Sewage sludge (SS), a by-product of wastewater treatment, consists of highly concentrated organic and inorganic pollutants, including phosphorus (P). In this study, P with different chemical fractions in SS under different drying and roasting temperatures was investigated with the use of appropriate standards, measurements, and testing protocol. The drying and roasting treatment of SS was conducted in a laboratory-scale furnace. Two types of SS samples under different treatment temperatures were analyzed by ³¹P NMR spectroscopy. These samples were dried by a vacuum freeze dryer at ?50 °C and a thermoelectric thermostat drying box at 105 °C. Results show that the inorganic P (IP) content increased as the organic P content decreased, and the bio-availability of P increased because IP is a form of phosphorous that can be directly absorbed by plants. ³¹P NMR analysis results indicate the change in P fractions at different temperatures. Non-apatite P was the dominant form of P under low-temperature drying and roasting, whereas apatite P was the major one under high-temperature drying and roasting. Results indicate that temperature affects the transformation of P.     

Reuse of de-inking sludge from wastepaper recycling in cement mortar products

This paper presents results of an investigation into the use of de-inking sludge from a paper recycling mill as feedstock material in the manufacture of cement mortar products, including masonry blocks and mortar renders. Both physical and mechanical properties of mortar specimens containing various amounts of de-inking sludge were investigated. It was observed that the addition of de-inking sludge to cement mortar at a fixed water-to-cement ratio significantly reduced flow properties and increased setting time. Water absorption and volume of permeable voids of cement mortar increased with increased dosage of de-inking sludge, with a corresponding reduction of bulk density. The 91-day compressive strength of mortar samples with 2.5 wt% and 20 wt% de-inking sludge loadings retained 83% and 62% respectively of the reference mortar strength. The corresponding drying shrinkage increased by up to 160% compared to reference samples. However, a de-inking sludge loading of up to 2.5 wt% did not significantly alter measured physical and mechanical properties. The results demonstrate that despite the high moisture absorbance of de-inking sludge due to its organic matter and residual cellulose fibre content, it serves as a potential supplementary additive and its cellulosic content proving to be an active set retardant to cementitious masonry products.     

沈阳市污水处理厂污泥处置现状及对策

目前沈阳市日处理市政污水能力为130万m^3／d,日产污泥约700t／d,污泥问题已经日益严重。通过对沈阳市污水处理厂污泥处置必要性、现状、污泥特征的分析,对沈阳市污泥处置的发展方向提出了思路及对策。     

Does the energy labelling system for domestic tumble dryers serve its purpose?

Tumble dryers sold on the market today are labelled according to their energy efficiency. This labelling system has primarily two purposes: to guide buyers to a product with low energy use, lower cost and lower environmental impact and to encourage producers to develop even more energy-efficient products. Tumble dryers are optimized for their maximum capacity, which is used as the standard load for determining the energy label. Three different tumble dryers have been tested with different drying loads. Results indicate that all the tested tumble dryers have significantly lower energy efficiency when drying small loads. In order to encourage the development of tumble dryers with high energy efficiency at drying loads used in ordinary households, the standards for the energy labelling system should be revised.