Simulated reaction of formaldehyde and ambient atmospheric particulate matter using a chamber

The reaction of HCHO with Beijing winter's real ambient particulate matter(PM) inside a 3.3 m~3 Teflon Chamber was conducted in this study. NO_2, O_3 and H_2O gases were removed from the ambient aerosol before entering into the chamber. The decays of HCHO were monitored(acetylacetone spectrophotometry method) during the reactions at different PM number concentrations(N_a) and relative humidities(RHs), and the formed particulate formate was detected by IC and XPS techniques. The results showed that when RH was10%–15%, the decay rate of HCHO in the chamber was higher with the existence of PM from relatively clean days(with number concentration(N_a) 200,000 particle/L, 0.35–22.5 μm)compared to dirty days(N_a 200,000 particle/L, 0.35–22.5 μm). When RH increased to 30%–45%, PM can hardly have significant influences on the decay of HCHO. The formations of formate on the reacted PM were consistent with the HCHO decay rates at different ambient PM N_aand RH conditions. This is a first study related to the "real" ambient PM reacted with HCHO and suggested that in the clean and low RH days, PM could be an effective medium for the conversion of HCHO to formate.     

斜坡失稳的动力学分析

本文从岩土破坏的本构律出发建议了斜坡失稳的滑动—弱化模式,然后对平面倾斜面、幂函数型滑动面、园弧型滑动面等简单的情形进行了斜坡失稳的动力学分析,得到了滑坡速度分布的表示式:讨论了坡底速度、滑坡止滑位置等问题。     

Emissions of organophosphate and brominated flame retardants from selected consumer products and building materials

The emissions of selected flame retardants were measured in 1- and 0.02-m³ emission test chambers and 0.001-m³ emission test cells. Four product groups were of interest: insulating materials, assembly foam, upholstery/mattresses, and electronics equipment. The experiments were performed under constant environmental conditions (23°C, 50% RH) using a fixed sample surface area and controlled air flow rates. Tris (2-chloro-isopropyl)phosphate (TCPP) was observed to be one of the most commonly emitted organophosphate flame retardants in polyurethane foam applications. Depending on the sample type, area-specific emission rates (SER_a) of TCPP varied between 20 ng m⁻² h⁻¹ and 140 μg m⁻² h⁻¹.The emissions from electronic devices were measured at 60°C to simulate operating conditions. Under these conditions, unit specific emission rates (SER_u) of organophosphates were determined to be 10–85 ng unit⁻¹ h⁻¹. Increasing the temperature increased the emission of several flame retardants by up to a factor of 500. The results presented in this paper indicate that emissions of several brominated and organophosphate flame retardants are measurable. Polybrominated diphenylethers exhibited an SER_a of between 0.2 and 6.6 ng m⁻² h⁻¹ and an SER_u of between 0.6 and 14.2 ng unit⁻¹ h⁻¹. Because of sink effects, i.e., sorption to chamber components, the emission test chambers and cells used in this study have limited utility for substances low vapour pressures, especially the highly brominated compounds; hexabromocyclododecane had an SER_a of between 0.1 and 29 ng m⁻² h⁻¹ and decabromodiphenylether was not detectable at all.     

Time course of isocyanate emission from curing polyurethane adhesives

The time course of isocyanate emission from curing polyurethane (PUR) resins and adhesives was studied in two different emission test chambers. The measured emissions were strongly dependent on the type of experiment. The adhesives under investigation contained different types of diisocyanates and are used for different applications, e.g. for fixing of textile floor coverings. The influence of the curing mechanism on emission was studied by comparing the emission curves of one-component adhesives (OCA) and two-component adhesives (TCA). For TCA, the decrease in isocyanate emission was found to follow a two-step process during curing. In the first step, the emission is dominated by surface evaporation, and the decay of emission is mainly caused by the decrease in monomer content due to reaction. In the second step, the release is limited by internal diffusion. The influence of monomer reactivity on the emission profile could be demonstrated for 2,4′- and 4,4′-MDI. The less-reactive 2,4′-MDI caused prolonged emission. A strong dependence of emission rates on temperature and adhesive viscosity was also obvious. The evaluation of emission rates of different commercially available PUR adhesives showed the highest emission from systems that are applied at high temperatures. The high reactivity of diisocyanates requires special techniques for sampling and analysis. Therefore, an analytical method using HPLC–MS/MS was developed that enables limits of quantitation of <5 ng/m³ with a sampling volume of 100 l.     

A dynamic model of mating behavior in digger wasps: the energetics of male-male competition mimic size-dependent thermal constraints

I develop a state-based dynamic model of behavior to demonstrate that size-dependent differences in temperature tolerances are not necessary to account for the activity of small male digger wasps late in the day. In the model, males defend or patrol the nesting area, wait near nests, or feed away from the nesting area depending on time of day, energy reserves and size rank. I assume a large male competitive advantage, so mating opportunities decrease with size rank for territorial or patrolling males and are rare for all waiting males; the costs of patrolling or defense are higher than the costs of waiting. If energy reserves of all males are initially small, all males alternate feeding and territorial or patrolling behavior. If energy reserves are initially large, large males patrol or maintain territories until they risk starvation and leave the area to feed. At this time, smaller males that have conserved their resources by waiting and feeding may defend territories or patrol. I simulate the behavior of three populations representing two species of Microbembex by assuming large initial energy reserves for populations in which males were territorial and small initial reserves for populations in which males patrolled, and then convert the predicted time of activity to temperature using local regressions from field studies. Temporal patterns in the activity of large and small males were similar to those actually observed, and relationships between size and temperature predicted by the model corresponded to most observations and were sometimes positive. Thus, the delayed activity of smaller males does not correspond to activity at higher temperatures and is probably not attributable to size-dependent thermal tolerances, but may represent a temporal displacement of mating activity due to intra-sexual competition and mediated by energetics. The model makes testable predictions on the timing of feeding and depletion of energy reserves in relation to size and initial energy state, and suggests how differences among species may influence the temporal and spatial organization of male mating behavior. Received: 27 February 1997 / Accepted after revision: 26 July 1997     

The tactics of mutual mate choice and competitive search

A model of mutual mate choice is described, formulated as a dynamic game, which yields predictions about mating behaviour under the influence of time constraints, choice costs and competition for mates. These variables were examined because they may result in a change in the distribution of qualities among unmated individuals of both sexes over the course of the breeding season. The model predicts that mutual choice gives rise to assortative mating, although high costs of choice and/or inaccurate assessment both lead to lower overall correlations between the qualities (or the attractiveness) of mates. When all individuals are present from the start of the breeding season, the correlation between the qualities of individuals pairing at a given time declines throughout the season, so that mates are more closely matched among individuals who pair early than among those who pair late (and extra-pair copulation may thus be more common among the latter). Delayed arrival of lower-quality individuals may, however, lead to an increase in this correlation with time during the early part of the season. The mean quality of unmated males and females declines over time, because more attractive individuals tend to mate sooner. As a result of this decline, and because of time constraints, superior individuals become less choosy as the season progresses. If choice is costly, however, then inferior individuals become more selective with time during the early part of the season, and the level of choosiness peaks later for such individuals. Received: 28 March 1996 / Accepted after revision: 21 September 1996     

A dynamic model of human dispersal in a land-based economy

This paper presents a dynamic state variable model that examines human dispersal in a land-based economy. In humans, like other animals, many individuals disperse during their lifetimes, with extensive variability in the timing and likelihood of dispersal by individuals of different states. The model places human and non-human dispersal in a common framework, specifically by utilizing a cost-benefit approach. As with other animals, individual access to resources likely plays an important role in shaping human dispersal, and the model explores the mechanisms underlying this relationship. Over a series of time steps, individuals must decide whether to stay in their natal area or disperse, given their states (wealth, marital, and inheritance status) and the environmental constraints on dispersal. Costs of dispersal include time and an initial drop in wealth, while the benefit is the potential of the dispersal area to increase wealth. The model determines whether dispersing or staying results in the highest fitness, where fitness is a function of individual wealth and years married. The model shows that dispersal is favorable under a wide range of environmental conditions, but that it also varies predictably according to individual states. Men of middle wealth values disperse under a wider variety of circumstances than poorer or wealthier men. Wealthy men, who are particularly sensitive to the time cost and mortality risk associated with dispersing, appear to adopt a more conservative dispersal strategy than poorer men, who are more sensitive to the wealth cost and wealth growth rate associated with dispersing. Dispersal behavior is also contingent on its effects on an individual's probability of marrying or inheriting wealth. Finally, the model fosters an examination of how the interaction of life events, and their directions of causation, can be studied. Received: 6 May 1998 / Received in revised form: 3 February 1999 / Accepted: 7 February 1999     

Influence of ozone on the sampling and storage of volatile organic compounds in canisters

A dynamic dilution system was used for the study of the influence of ozone on the sampling and storage of volatile organic compounds (VOCs) at 0, 4, 7 and 14 days in “TO-Can” canisters at two ozone concentrations, 60 and 150 ppbv. Among the 31 ozone precursors VOCs, a representative mixture containing five alkenes, five aromatics, acetylene and 1,3 butadiene was selected using the Clausius–Clapeyron equation. Here, we demonstrate that the presence of ozone have no influence on the concentrations of VOCs after 14 days storage period and consequently no problem of representativity of the sampling appears after 14 days of storage. The main explanation is the degradation of ozone in contact with deactivated walls of canisters.     

What is the acceptable margin of error for the oxygen uptake method in evaluating the reactivity of organic waste?

The acceptable margin of error for the organic waste reactivity measured by the oxygen uptake method was assessed. Oxygen uptake was determined by the Dynamic Respiration Index (DRI) (mgO₂/kgVS h). The composed uncertainty (uC) of the experimental set up used for the DRI test was evaluated and the uncertainty (u) of all the components of the apparatus was evaluated. A procedure for calculating the uC of the apparatus is proposed. The components affecting the uC of the DRI to a more significant extent were the one of the oxygen mass rate and the u of the amount of VS in the sample analyzed. For a confidence level of 99.73%, the extended uC (UC) interval for a DRI = 1024 mgO₂/kgVS h was ±440 mgO₂/kgVS h, whereas for a DRI = 3489 mgO₂/kgVS h, the UC interval was ±1288 mgO₂/kgVS h. When oxygen consumption and VS content become lower than 600 mgO₂/h and 0.9 kg, respectively, the UC interval is similar to the measured DRI.     

Does industrial waste taxation contribute to reduction of landfilled waste? Dynamic panel analysis considering industrial waste category in Japan

Waste taxes, such as landfill and incineration taxes, have emerged as a popular option in developed countries to promote the 3Rs (reduce, reuse, and recycle). However, few studies have examined the effectiveness of waste taxes. In addition, quite a few studies have considered both dynamic relationships among dependent variables and unobserved individual heterogeneity among the jurisdictions. If dependent variables are persistent, omitted variables cause a bias, or common characteristics exist across the jurisdictions that have introduced waste taxes, the standard fixed effects model may lead to biased estimation results and misunderstood causal relationships. In addition, most existing studies have examined waste in terms of total amounts rather than by categories. Even if significant reductions in total waste amounts are not observed, some reduction within each category may, nevertheless, become evident.Therefore, this study analyzes the effects of industrial waste taxation on quantities of waste in landfill in Japan by applying the bias-corrected least-squares dummy variable (LSDVC) estimators; the general method of moments (difference GMM); and the system GMM. In addition, the study investigates effect differences attributable to industrial waste categories and taxation types. This paper shows that industrial waste taxes in Japan have minimal, significant effects on the reduction of final disposal amounts thus far, considering dynamic relationships and waste categories.