微型反应柱在含铬废水处理试验研究中的应用

针对镀铬车间废水,采用活性炭吸附处理法对Cr6 和Cr3 的去除效果进行了系统的试验.通过微型反应柱集成装置对穿透时间、吸附容量及活性炭再生方法进行了研究,动态试验表明该装置能有效地处理含铬废水.     

ClO2处理含铁,锰及细菌饮用水的应用研究

为了除去水中高含量的铁，锰及细菌，采用ＣｌＯ２氧化Ｆｅ＾２＋，Ｍｎ＾２＋和灭菌的方法。研究结果表明，处理后水平铁，锰都末检出，细菌指标符合国家饮用水标准。此法具有工艺简单，操作方便，反应速度快，去除率极高，不产生致癌物质ＴＨＭ、且能很好地除水中的异味及色度等优点。此法适用于各种生活给水系统。     

含磷酸盐对聚乙烯粉尘爆燃的抑制影响实验研究

为了揭示含磷酸盐(KH₂PO₄,NH₄H₂PO₄,Ca(H₂PO₄)₂)对聚乙烯粉尘爆炸的抑制作用,通过哈特曼管实验装置和20 L球形爆炸罐,研究含磷酸盐对聚乙烯粉尘爆炸火焰和压力传播特性的抑制效果。采用高速摄影方法记录含磷酸盐对聚乙烯粉尘爆炸火焰传播的影响;采用20 L球形爆炸罐,收集压力传感器数据,分析含磷酸盐对聚乙烯粉尘爆炸压力的影响;采用同步热分析仪研究聚乙烯粉尘和含磷酸盐的热解行为。研究结果表明：含磷酸盐对聚乙烯粉尘爆炸火焰传播特性参数和爆炸压力特性参数均有显著的影响,通过对比得到NH₄H₂PO₄抑制效果相对最好。研究结果可为含磷酸盐在抑爆剂工程应用提供理论基础。     

含锌废水处理技术的研究进展

综述了传统的物理化学法和生物法处理含锌废水的原理,系统阐述了其研究进展.微生物固定技术是一种新兴而有效的生物处理技术,尤其是硫酸盐还原菌固定化技术,将厌氧活性污泥包埋,构建稳定高效的微生物体系,以加强其抗毒性和处理效率.因此,在含锌废水处理方面具有很大的发展潜力,有望得到广泛应用.     

Integrated Risk Framework for Onsite Wastewater Treatment Systems

Onsite wastewater treatment systems (OWTS) are becoming increasingly important for the treatment and dispersal of effluent in new urbanised developments that are not serviced by centralised wastewater collection and treatment systems. However, the current standards and guidelines adopted by many local authorities for assessing suitable site and soil conditions for OWTS are increasingly coming under scrutiny due to the public health and environmental impacts caused by poorly performing systems, in particular septic tank-soil adsorption systems. In order to achieve sustainable onsite wastewater treatment with minimal impacts on the environment and public health, more appropriate means of assessment are required. This paper highlights an integrated risk based approach for assessing the inherent hazards associated with OWTS in order to manage and mitigate the environmental and public health risks inherent with onsite wastewater treatment. In developing a sound and cohesive integrated risk framework for OWTS, several key issues must be recognised. These include the inclusion of relevant stakeholders throughout framework development, the integration of scientific knowledge, data and analysis with risk assessment and management ideals, and identification of the appropriate performance goals for successful management and mitigation of associated risks. These issues were addressed in the development of the risk framework to provide a generic approach to assessing risk from OWTS. The utilisation of the developed risk framework for achieving more appropriate assessment and management techniques for OWTS is presented in a case study for the Gold Coast region, Queensland State, Australia.     

聚硅酸锌铝的制备及其性能研究

以硅酸钠、硫酸锌、硫酸铝为原料,通过共聚法制备了无机高分子絮凝剂聚硅酸锌铝（PSZAS）,研究了Na₂SiO₃的摩尔浓度、活化时间、Al/Si、Zn/Si 配比及絮凝剂的投加量对絮凝效果的影响,用X-射线衍射（XRD）和电子扫描电镜（SEM）对该絮凝剂的结构及形貌进行了表征。结果表明：当硅酸钠的浓度为0.4 mol/L,硅酸活化时间为2 h,Si∶Al∶Zn=1∶1∶1.5,絮凝剂投加量为20 mL/L废水时,絮凝剂的电中和能力和吸附架桥能力最强,絮凝剂对含H-酸染料模拟废水的絮凝效果最好。     

Experimental study of recycling lightweight concrete with aggregates containing expanded glass

The focus is on the issue of waste management when constructing and recycling lightweight concrete (LWC) with aggregates containing expanded glass. The paper analyses the recycling of concrete from lightweight aggregates, and on the important issue of environmental and waste management. The characteristics of recycling LWC such as density, compressive strength and thermal conductivity are investigated, and compared with normal existing concrete from lightweight aggregates. The results indicate that it is possible to recycle lightweight concrete construction waste. The described method shows great possibilities for increasing the use of construction waste materials from LWC containing expanded glass, in order to benefit from better use of the available capacity from existing construction waste. The characteristics of density, compressive strength and thermal conductivity from the new recycled material were compared with normal existing concrete from lightweight aggregates, such as changes in dependency on the type and parts of waste as well as its new binding components. Thus, a new recycled material has been created with new characteristics of density, compressive strength and thermal conductivity, which is conform to the compressive strength class and rules on heat protection and energy efficiency use in buildings (SI OJ RS No. 42/2002). Laboratory density, compressive strength, and thermal conductivity tests results showed that LWC can be produced by the use of waste LWC with aggregates containing expanded glass. However, the use of waste LWC with aggregates containing expanded glass seems to be necessary for the production of cheaper and environmentally friendly LWC.     

CN-测定中显色剂配制方法的选择与保存时间

对2种氰化物显色剂配制方法进行了对比,发现用无水乙醇配制的显色剂具有方便,经济,实用,无毒且显色剂保存期长等优势。     

进口含金属物料的固体废物鉴别方法研究

基于已完成的112例进口含金属物料的固体废物鉴别实践,系统地介绍了进口含金属物料的申报品名及各品名所占比例,种类及各种类的特征、固体废物鉴别关键方法和每种鉴别结果所占比例,其中申报品名主要为矿石(砂),所占比例为51.8%;鉴别结果主要为冶炼渣,所占比例为37.5%。提出对于进口的含金属物料,通过测量主要成分和含量、最主要金属元素及典型重金属元素的含量、物相组成、矿相组成,对于极细的粉末等特殊物料,还需要粒度分析等辅助试验,确定其产生来源。如果确定属于金属冶炼过程中产生的副产物、污染控制设施或环境治理过程中产生的物料、含金属废料简单加工处理产物、矿物采选过程中产生的废弃物,那么鉴别物料属于固体废物。     

电石渣－铁屑法去除硫酸废水中的氟和砷

对各种处理含氟、砷废水的方法进行了探讨，选择了以电石渣和废铁屑为药剂去除硫酸废水中氟和砷的方法，取得了较好的效果。该法以废治废、工艺简便、运行费用低，处理后的废水可达排放标准。