Structure of turbulent plumes from a momentumless source in a smooth bed

The spatial development of a passive scalar plume is studied within the inhomogeneous turbulence of a boundary layer flow in a recirculating laboratory flume with a smooth bed. The source of the scalar is located flush with the bed, and the low-momentum source design is intended to simulate a diffusive-type scalar release. A weakly diffusive fluorescent dye is used as the scalar. Planar laser-induced fluorescence (PLIF) techniques were used to record the structure of the plume at a spatial resolution of 150 μm. The measured structure of the mean concentration field is compared to an analytical solution for shear-free, homogeneous turbulence. The laboratory plume exhibits spatial development in the mean concentration field that deviates from the self-similar behavior predicted by the analytical solution; this deviation is due to the mean shear and inhomogeneity of the turbulence. In particular, the influence of the viscous sublayer on the plume development is seen to be significant. Nonetheless, the analytical solution replicates some of the features seen in the laboratory plume, and the solution suggests methods of reducing the laboratory data even for cases where the results deviate from the analysis. We also examine the spatial development of the root-mean-square (rms) fluctuating concentration field, and use scalar probability density functions to examine the relationship between the mean and fluctuating concentrations.     

屋顶绿化生态系统箱的研制

调查发现广州市屋顶自然生长的维管植物有49科109属128种,植物种类较多的科为菊科、禾本科、桑科、景天科、茜草科和鸭跖草科;屋顶自然生长的植物种类数量与环境受污染程度成反比,而与周围植物的多少成正比;屋顶自然生长的植物由于长期适应屋顶的极端环境,形成了的一些独特的生态生物学特征。基于上述结果配置相应的植物组合,设计适于屋顶绿化的生态系统箱、配制相应土壤并进行技术集成,观测其生长和隔热效应。同时进行空白对照、黑网荫蓬对照、生态隔热层对照、普通土壤种植区对比试验,发现生态隔热层和生态系统箱具有成本低、易维持、隔热好、景观美的效果。     

东北过伐林灌木层物种多样性与林分因子的典型相关分析

研究林分特征尤其是经营上可以控制的因子对生物多样性的影响，将有助于制定合理的经营措施来维持和保护生物多样性，本文作者以我国东北过伐林区3种典型天然林类型为对象，采用典型相关分析方法，研究影响灌木层物种多样性的主要因子。结果表明：影响灌木层物种多样性的主要因子包括土壤含水率，树种多样性和林分密度；灌木层多样性组的变异被林分组第一典型变量解释的比例为68.32%,仍有31.68%的变异不能得到解释。     

Progress in developing an ANN model for air pollution index forecast

An air pollution index (API) reporting system is introduced to selected cities of China for public communication on air quality data. Shanghai is the first city in China providing daily average API reports and forecasts. This paper describes the development of an artificial neural network (ANN) model for the API forecasting in Shanghai. It is a multiple layer perceptron (MLP) network, with meteorological forecasting data as the main input, to output the next day average API values. However, the initial version of the MLP model did not work well. To improve the model, a series of tests were conducted with respect to the training method and structure optimization. Based on the test results, the training algorithm was modified and a new model was built. The new model is now being used in Shanghai for API forecasting. Its performance is shown reasonably well in comparison with observation. The application of the old model was only weakly correlated with observation. In 1-year application, the correlation coefficients were 0.2314, 0.1022 and 0.1710 for TSP, SO₂ and NO_x, respectively. But for the new model, for over 8 months application, the correlation coefficients are raised to 0.6056, 0.6993 and 0.6300 for PM₁₀, SO₂, and NO₂. Further, the new algorithm does not rely on manpower intervention so that it is now being applied in several other Chinese cities with quite different meteorological conditions. The structure of the model and the application results are presented in this paper and also the problems to be further studied.     

A new approach for modelling potential effects in cation adsorption onto binary (hydr) oxides

The current approach for modelling ion adsorption onto binary (hydr)oxides using homogeneous surface complexation models involves the assumption of either an ideal mixture of the two surfaces (i.e. two surface sites on one surface) or a patchwise surface (i.e. two surfaces with one surface site on each surface). As the physical truth should be between these two limiting cases, a model which assumes a patchwise surface constituted of three patches is proposed. Two patches represent the distinct (hydr)oxides, and the third one a mixture of these distinct (hydr)oxides. Using the diffuse layer model, the three approaches are applied to literature data for Cd adsorption onto binary mixtures of alumina-coated silica at total constant Cd concentration and varying amounts of alumina coatings. For Cd adsorption onto these binary (hydr)oxide systems, the new approach explains the observed potential effects. The proposed model, which contains two additional adjustable parameters in terms of site concentrations or one adjustable parameter in terms of specific surface area, is more successful than the two limiting cases. The new model is then validated by predicting Ca and Zn behaviour on the same binary (hydr)oxide system.     

基于精细化观测的沙尘通量分布特征

研究沙尘随高度的变化特征对揭示沙尘物质在近地层分布特征具有重要意义。为揭示0—80 m沙尘通量的垂直分布规律,在野外实测的基础上,选取2008年7月20日、8月7日、8月19日、8月29日4次沙尘天气,对贴地层（0—0.05 m）、中间层（0.05—2 m）、近地层（2—80 m）的沙尘通量进行对比分析。结果表明：贴地层（0—0.05 m）,沙尘通量随着高度的增高呈增加趋势,最大值为1604.29 g?mm^?2。中间层（0.05—2 m）,沙尘通量随高度分布的关系为幂函数关系,且随着高度的升高沙尘通量减小,决定系数R²值均在0.9以上。近地层（2—80 m）,沙尘通量随高度增加呈分段函数分布,32 m、48 m处为沙尘通量的拐点高度。由此看出,研究沙尘通量对阐明沙尘输送机制非常重要,不仅可加强对沙尘输送的定量研究,还可为沙尘输送的数值模拟提供重要参数。     

WRF模式对污染天气下边界层高度的模拟研究

大气边界层高度是影响大气污染物浓度的重要因素之一,但数值模式中选择不同边界层参数化方案模拟的边界层高度有很大差异.利用WRF模式中5种边界层参数化方案及2006~2007年春、秋、冬3季河北香河地区激光雷达观测资料,对比分析了污染天气下,不同边界层方案对边界层高度的模拟效果,并分析了误差产生的可能原因.结果表明：5种参数化方案均能模拟出3季污染天气下边界层高度的变化特征,但各方案模拟的边界层高度与观测之间均存在较大误差.模拟的最大边界层高度月变化特征显示,秋冬季的模拟结果与观测值匹配较好,春季偏差较大;模拟的边界层高度日变化显示,均方根误差：春季 > 秋季 > 冬季,且误差在午后（14：00~18：00）更加明显;对该地区而言,非局地YSU方案能较好地模拟污染天气下的边界层高度;各参数化方案中边界层高度计算方法的不同及对大气廓线、湍流动能的模拟差异,可能是造成模拟边界层高度产生误差的主要原因.     

基于HLA的大气环境仿真应用研究

针对大气环境仿真的特点,采用HLA分布式仿真技术,论述了以HLA/RTI为支撑的大气环境分布式仿真体系结构、关键技术及实现方案,并对该环境下开发大气环境联邦成员进行了详细的说明,实现了大气环境建模与仿真应用的一体化设计,从而提高了大气环境仿真应用的互操作性和可重用性,为大气环境仿真向其它系统仿真应用提供了一种有效的手段。     

武汉阳逻砾石层ESR地层年代学研究

武汉"阳逻砾石层"是长江中下游新生代的一个重要的岩石地层单位,其形成年代一直是地质和地理学者关注的重要问题。为了更深入地探讨这一问题,在它的两个典型的剖面中采集了8个样品进行ESR地质年代测试,测试结果表明,阳逻砾石层形成于新近纪早更新世中晚期。将本次ESR测年数据与前人的热释光的测年数据、江汉平原西缘和北缘相同岩石地层层位和相同地貌位置的砾石层的测年数据、长江中下游网纹砾石层的测年数据比较发现,它们具有较好的一致性。     

Effects of tectonic stress environment on tectonophysical features of deformed coal

To study the effects of the tectonic stress environment on the tectonophysical features of deformed coal, No.8 Mine in the Pingdingshan mine area is used as a study area and the relationship between the development of deformed coal, distribution of fractures, formation of deformed coal and tectonic stress environment are analyzed. The results indicate that the thickness of the bedrock layer should be included in the analysis of the tectonic stress environment for a region of intense tectonic activity. Although the reverse faulting stress regime can control the development of deformed coal, the C seam is extremely sensitive to the stress regime. The most advantageous direction of the deformed coal fractures is consistent with the regional maximum principal stress, and the development of fractures is closely related to the evolution of the tectonic stress environment. The fracture density of the E seam presents a uniform distribution, yet that of the C seam is completely heterogeneous. Superposition and compounding of the tectonic communities evidently increase the fracture density of the deformed coal. There is a relatively apparent boundary between the different types of deformation, which gradually transform from brittle to ductile with a decreasing lateral pressure coefficient. A generalized deformation pattern of the deformed coal is proposed and can be divided into frictional sliding and solid flow.