轻型汽油车简易瞬态工况污染物排放检测系统设计

阐述了轻型汽油车简易瞬态工况污染物排放检测系统．该系统的性能指标和功能特点完全满足DB11／123—2000《轻型汽油车简易瞬态工况污染物排放标准》的要求。该系统基于污染物质量排放测试．具有测试方法简单、测试结果准确．排放判定方法科学的特点。对于有效控制．减少车辆污染物的排放．改善大气环境质量．具有重要的现实意义。     

江西铜资源开发与污染防治研究

分析了江西铜矿山采选的排污及污染状况，排污特征及污染变化趋势，还从工艺角度，评价了采选工艺技术水平与国外差距，并对污染防治与可持续发展对策进行了研讨。     

西北地区生态环境恶化致灾与改良对策

西北地区是我国生态环境十分脆弱的地区。由于人们认识上的局限,社会生产活动中许多有害于环境的成份不断增大失控,导致生态环境日益恶化,促使自然灾害增多,以致在很大程度上制约国民经济的发展和群众生活水平的提高。作者紧密结合西北地区环境恶化的现状,如植被破坏,土地退化、水资源缺乏和环境污染,及其对区域经济发展带来的损失等问题,进行了全面系统的分析,在追寻生态环境恶化成因的基础上,提出了积极的改良对策。     

清初“摊丁入亩”政策对环境的影响

清初“摊丁入亩”政策对清社会经济的恢复发展确实起到了促进作用,但同时对环境也构成了巨大威胁,引发了地表植被遭严重玻坏、自然灾害频繁、珍稀野生动植物大量灭绝等一系列环境问题。剖璞见玉,对今有史鉴作用。     

Assessment of emissions data for the Toronto region using aircraft-based measurements and an air quality model

An aircraft-based measurement campaign was conducted during the summer of 1996 in the vicinity of Toronto, Canada. The objective of the campaign was to assess the errors in a particular emission inventory used by three-dimensional air quality models. Measurements of NO₂ and hydrocarbons were made both upwind and downwind of Toronto, on days with strong synoptic-scale flow from a west to northerly direction. The chemical composition of the background airmass on these days was typical of unpolluted continental air. Measurements have been compared with the output from an on-line air quality model (MC2-AQ) run at 5 km resolution and suggest that emissions of NO_x from Toronto are well described in the emission database, though evidence that NO_x emissions are underestimated for suburban regions surrounding Toronto was found. In general, no significant underestimation of hydrocarbon emissions was found, though emissions of the model propane species, which includes acetylene and benzene, was underestimated by at least a factor of two.     

Influence of workpiece materials on aerosol emission from die sinking electrical discharge machining process

Simultaneous investigation of environmental emissions and machining aspects of electrical discharge machining process is essential for achieving hygienic and efficient machining. The main objective of the present work is to experimentally investigate and analyze the aerosol emission rate and the material removal rate from a die sinking electrical discharge machining process for three commonly used work piece materials viz., tool steel, mild steel and aluminum using Taguchi methodology of Experimental Design in order to suggest suitable process conditions for green manufacturing. The aerosol emission profile of all workpiece materials was found to be closely related to the material removal profile. A significant variation in emission and material removal rate was observed for workpiece materials which may be accorded to the variation in melting and vaporization temperatures. It was also observed that majority of aerosol constituents evolved from workpiece materials and that the constituents with low melting points were having high relative concentration in the aerosol emitted. The study introduced a parameter, the relative emission rate for comparing the emission for various process parameters and workpiece–tool material combinations. The favorable machining parameters for each material were then identified by employing signal to noise ratio analysis of the relative emission rate.     

Multielement techniques for determination of Inorganics in Watert†

Several analytical techniques offer the capability of simultaneously determining 5–40 elements. Of those techniques available, two are receiving extensive attention for analysis of water samples. Optical emission spectrometry utilizing plasma excitation has now evolved to a status in which 20–40 elements can be simultaneously determined on a routine basis. Instrumentation which relies on ion exchange chromatography separations is available which allows the routine determination of several cationic and/or anionic species.

The present discussion will briefly describe each of the above multielement analysis systems, summarize their respective capabilities and limitations with respect to water analysis, and project areas of future development.     

烟气排放连续监测系统存在问题及建议

介绍了烟气排放连续监测系统（CEMS）中气态污染物监测子系统、烟尘监测子系统、烟气排放参数监测子系统的配置现状。针对现场CEMS的安装、运营、环保检查、质控比对监测中常见的问题,进行了研究与分析,对分析、校准、测量等关键单元进行了优化,提出了合理改进建议和对策。     

Deterioration of Polyamideamine–Epichlorohydrin (PAE) in Aqueous Solutions During Storage: Structural Changes of PAE

Structural changes of polyamideamine–epichlorohydrin (PAE) in solution during storage at 4 °C and pH 4.2–4.5 for up to 8.9 years were studied by ¹H- and ¹³C-NMR analyses, colloidal titration and others. NMR signals due to 3-hydroxy-azetidinium groups of PAE decreased during storage, and correspondingly 2, 3-dihydroxypropyl groups were formed by the ring opening. The content of 3-hydroxy-azetidinium groups in PAE determined by ¹H-NMR were similar to that determined by the colloidal titration, although the former was higher than the latter. About 50% of the 3-hydroxy-azetidinium groups present in the fresh PAE were lost during storage for 8.9 years. Furthermore, ¹³C-NMR analysis revealed that significant depolymerization of polyamideamine chains occurred by hydrolysis of the amide linkages during storage. Rough evaluation of number average degree of polymerization (DPn) of the amideamine repeating unit showed that the DPn decreased from 12 to 2 during storage for 8.9 years.