Advances in the treatment of multi-pollutant flue gas in China's building materials industry

In most of the world's building material industries, the control of flue gas pollutants mainly focuses on a single pollutant. However, given the large capacity and high contribution of China's building materials industry to global air pollution, the need to develop multi-pollutant emission reduction technology is urgent. Recently, China has focused on reducing the emissions of flue gas pollutants in the building materials industry, established many key research and development projects, and gradually implemented more stringent pollutant emission limits. This project focuses on the most recent advances in flue gas emission control technology in China's building materials industry, including denitration, dust removal, desulfurization, synergistic multi-pollutant emission reduction, and the construction of pilot research and demonstration projects for pollutant removal in several building material industries. On this basis, revised pollutant limits in flue gas emitted in China's building material industry are proposed.     

VOC emission caps constrained by air quality targets based on response surface model: A case study in the Pearl River Delta Region, China

Because of the recent growth in ground-level ozone and increased emission of volatile organic compounds (VOCs), VOC emission control has become a major concern in China. In response, emission caps to control VOC have been stipulated in recent policies, but few of them were constrained by the co-control target of PM_2.5 and ozone, and discussed the factor that influence the emission cap formulation. Herein, we proposed a framework for quantification of VOC emission caps constrained by targets for PM_2.5 and ozone via a new response surface modeling (RSM) technique, achieving 50% computational cost savings of the quantification. In the Pearl River Delta (PRD) region, the VOC emission caps constrained by air quality targets varied greatly with the NO_x emission reduction level. If control measures in the surrounding areas of the PRD region were not considered, there could be two feasible strategies for VOC emission caps to meet air quality targets (160 µg/m³ for the maximum 8-hr-average 90th-percentile (MDA8-90%) ozone and 25 µg/m³ for the annual average of PM_2.5): a moderate VOC emission cap with <20% NOx emission reductions or a notable VOC emission cap with >60% NO_x emission reductions. If the ozone concentration target were reduced to 155 µg/m³, deep NO_x emission reductions is the only feasible ozone control measure in PRD. Optimization of seasonal VOC emission caps based on the Monte Carlo simulation could allow us to gain higher ozone benefits or greater VOC emission reductions. If VOC emissions were further reduced in autumn, MDA8-90% ozone could be lowered by 0.3-1.5 µg/m³, equaling the ozone benefits of 10% VOC emission reduction measures. The method for VOC emission cap quantification and optimization proposed in this study could provide scientific guidance for coordinated control of regional PM_2.5 and O₃ pollution in China.     

Mercury emissions and partitioning from Indian coal-fired power plants

In India coal combustion is the single largest source of emission of mercury which is a wide-spread persistent global toxicant, travelling across international borders through air and water. As a party to the Minamata convention, India aims to monitor and reduce Hg emissions and stricter norms are introduced for mercury emissions from power plants (30 μg/Nm³for flue gas in stack).This paper presents the results obtained during the experimental studies performed on mercury emissions at four coal-fired and one lignite-fired power plants in India. The mercury concentration in the feed coal varied between 0.12–0.27 mg/Kg. In the mercury mass balance, significant proportion of feed coal mercury has been found to be associated with fly ash, whereas bottom ash contained very low mercury. 80%–90% of mercury was released to air through stack gas. However, for circulating fluidised bed boiler burning lignite, about 64.8% of feed mercury was found to get captured in the fly ash and only 32.4% was released to air. The mercury emission factor was found to lie in the range of 4.7–15.7 mg/GJ.     

Estimation of atmospheric trace metal emissions in Vilnius City, Lithuania, using vertical concentration gradient and road tunnel measurement data

A new approach for the estimation of trace metal emissions in Vilnius city was implemented, using vertical concentration profiles in the urban boundary layer and road tunnel measurement data. Heavy metal concentrations were examined in fine and coarse particle fractions using a virtual impactor (cut-off size diameter 2.5 μm). Negative vertical concentration gradients were obtained for all metals (Ba, Pb, V, Sb, Zn) and both fractions. It was estimated that the vertical concentration gradient was formed due to emissions from an area of about 12 km². Road tunnel measurements indicated that trace metal concentrations on fine particles were lower than those on coarse particles, which suggested that re-emitted road dust was highly enriched in trace metal due to historic emissions within the tunnel. Emission rates of different pollutants in the road tunnel were calculated using pollutant concentration differences at the tunnel entrance and exit and traffic flow data. Heavy metal emission rates from the area of Vilnius city were estimated using the vertical gradient of heavy metal concentrations and the coefficient of turbulent mixing, as derived from meteorological measurement data. The emission values calculated by the two different methods coincided reasonably well, which indicated that the main source of airborne trace metals in Vilnius city is traffic. The potential of the vertical concentration gradient method for the direct estimation of urban heavy metal emissions was demonstrated.     

Modelling assessment of PM10 exposure control policies in Northern Italy

To assess the impact of three different emission reduction scenarios on PM10 concentrations in Northern Italy, the TCAM multiphase model has been applied in the framework of the CityDelta III-CAFE EU project. The considered domain, that is characterized by high urban and industrial emissions and a dense road traffic, due to frequently stagnating meteorological conditions is often affected by severe PM10 levels, far from the European standard regulations. The impact evaluation has been performed in terms of both yearly mean values and 50 g/m³ exceedance days for the 2004 Base Case simulation. The results show that the three selected emission reduction scenarios up to 2020 improve air quality all over the domain, in particular, in the area with higher emission density.     

Combustion and inorganic bromine emission of waste printed circuit boards in a high temperature furnace

High temperature combustion experiments of waste printed circuit boards (PCBs) were conducted using a lab-scale system featuring a continuously-fed drop tube furnace. Combustion efficiency and the occurrence of inorganic bromine (HBr and Br₂) were systematically studied by monitoring the main combustion products continuously. The influence of furnace temperature (T) was studied from 800 to 1400 °C, the excess air factor (EAF) was varied from 1.2 to 1.9 and the residence time in the high temperature zone (RT_HT) was set at 0.25, 0.5, or 0.75 s.Combustion efficiency depends on temperature, EAF and RT_HT; temperature has the most significant effect. Conversion of organic bromine from flame retardants into HBr and Br₂ depends on temperature and EAF. Temperature has crucial influence over the ratio of HBr to Br₂, whereas oxygen partial pressure plays a minor role. The two forms of inorganic bromine seem substantially to reach thermodynamic equilibrium within 0.25 s. High temperature is required to improve the combustion performance: at 1200 °C or higher, an EAF of 1.3 or more, and a RT_HT exceeding 0.75 s, combustion is quite complete, the CO concentration in flue gas and remained carbon in ash are sufficiently low, and organobrominated compounds are successfully decomposed (more than 99.9%).According to these results, incineration of waste PCBs without preliminary separation and without additives would perform very well under certain conditions; the potential precursors for brominated dioxins formation could be destroyed efficiently. Increasing temperature could decrease the volume percentage ratio of Br₂/HBr in flue gas greatly.     

汽油加生物添加剂对发动机废气排放的影响研究

通过发动机的台架试验,系统研究了将一种热带植物提取物作为添加剂加入到不同成分的汽油中对汽油机废气排放特性的影响．结果表明：对于93^#高清洁汽油和93^#成分汽油,除了未燃碳氢(HC)略有上升外,其他排放物如氮氧化物NOx、一氧化碳等有所减少,CO2排放有明显的改善．对于乙醇汽油,则HC和CO2略有上升．     

Sludge concentration dynamic distribution and its impact on the performance of UNITANK

UNITANK is a biological wastewater treatment process that combines the advantages of traditional activated sludge process and sequencing batch reactor, which is divided into Tank A, B and C. In this study, the sludge distribution and its impact on performance of UNITANK were carried out in Liede Wastewater Plant （WWTP） of Guangzhou, China. Results showed that there was a strong affiliation between Tank A and B of the system in sludge concentration distribution. The initial sludge concentration in Tank A could present the sludge distribution of the whole system. The sludge distribution was mainly influenced by hydraulic condition. Unsteady sludge distribution had an impact on variations of substrates in reactors, especially in decisive reactor, and this could lead to failure of system. Settler could partially remove substrates such as COD and NO3-N, but there was adventure of sludge deterioration. The rational initial sludge concentration in Tank A should be 4000-6000 mg/L MLSS.     

西北地区水资源—生态可持续发展的若干问题探讨

基于对西北地区大开发的关键性难题与一些违背自然规律的不良倾向的讨论 ,认为大开发的实施需要在系统科学思维的基础上综合考虑资源—环境—经济的协调发展。近年来 ,许多科学家从各种角度揭示了我国西北乃至北半球中纬度地区持续干旱的发展规律 ,对干旱化趋势与水盐失衡的分析表明 ,西北地区气候干旱化将长期存在 ,生态将继续退化 ,这种趋势是人力不可抗拒的。人为活动尤其是水资源的开发利用 ,对土壤生态的影响是非常明显的 ,应该在严格控制水资源利用总量的前提下 ,调整用水格局 ,发展节水经济 ,科学确定社会经济用水和生态用水的比例 ,保证必须的生态用水 ,大力发展生态植被。指出在分析西北生态环境问题时过于强调人为活动而忽视自然因素作用的倾向 ,讨论了水库兴修、灌溉、土地利用与改良、深层水利用、水环境脆弱性等水资源—生态建设与可持续发展中的若干关键性问题     

商用垃圾流化床焚烧炉多环芳烃排放的环境评价

对流化床垃圾焚烧炉中PAHs的排放特性进行了研究 .结果表明 ,烟囱烟气为流化床垃圾焚烧炉PAHs排放的主要途径 ,日排放量要高于其它途径 1— 2个数量级 ,且以低分子量物质为主 .脱除剂的添加对烟气中PAHs有减少的作用 ,但却增加了循环出口水中PAHs含量 .不同工况时PAHs环境排放毒性有变化 ,垃圾与煤混烧大于全煤 ,添加脱除剂大于未添加工况 ,但少于垃圾比例高的工况 .垃圾比例越高 ,毒性越大