Carbofuran degradation in soil profiles

Abstract

Two soils, Puyallup fine sandy loam from Puyallup, WA, and Ellzey fine sand from Hastings, FL, each with a prior history of carbofiiran exposure but with different pedological and climatological characteristics, were found to exhibit enhanced degradation toward carbofiiran in surface and subsurface soil layers. The treated Puyallup and Ellzey soils exhibited higher mineralization rates for both the carbonyl and the aromatic ring of carbofiiran when compared to untreated soils. Disappearance rates of [¹⁴C‐URL (uniformly ring labeled)] carbofiiran in the treated Ellzey soil was faster than in untreated soil, and also faster in surface soil than in subsurface soil. Initial degradation patterns in the treated Ellzey soil were also different from those in the untreated soil. The treated Ellzey soil degraded carbofuran mainly through biological hydrolysis, while untreated soil degraded carbofuran through both oxidative and hydrolytic processes.     

Options for Change in the Australian Energy Profile

Climate change is occurring largely as a result of increasing CO₂ emissions whose reduction requires greater efficiency in energy production and use and diversification of energy sources away from fossil fuels. These issues were central to the United Nation climate change discussions in Durban in December 2011 where it was agreed that a legally binding agreement to decrease greenhouse gas emissions should be reached by 2015. In the interim, nations were left with the agreement reached at the analogous 2009 Copenhagen and 2010 Cancun meetings that atmospheric CO₂ levels should be constrained to limit the global temperature rise to 2 °C. However, the route to this objective was largely left to individual nations to decide. It is within this context that options for reduction in the 95 % fossil fuel dependency and high CO₂ emissivity of the Australian energy profile using current technologies are considered. It is shown that electricity generation in particular presents significant options for changing to a less fossil fuel dependent and CO₂ emissive energy profile.     

Characteristics of chlorofluorocarbons (CFCs) emitted from a municipal waste treatment facility

The emission concentrations of several chlorofluorocarbons (CFCs) were measured from a municipal waste treatment facility (located in Seoul, Republic of Korea) to investigate the emission characteristics of CFCs in the urban environment. To this end, a total of five CFCs (CFC-10, CFC-11, CFC-20, CFC-30, and CFC-113) were analyzed by the thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) method. The results of this study indicate that the formation of CFC-11 (8.21 ± 1.68 ppb in spring) and CFC-20 (3.92 ± 3.93 ppb in spring) proceeded very actively within the facility. Moreover, CFC-113 was also found in relatively high concentrations (3.34 ± 1.31 ppb in spring) in the treatment facility. Unlike other CFCs, CFC-10 was observed mainly at ambient (and reference) locations and one point inside the treatment facility. In conclusion, emissions of some important CFCs are a prominent process, as they were measured either frequently or abundantly both in winter and spring. It is further indicated that certain CFCs (like CFC-11 and CFC-30) are subject to highly significant seasonal variations.     

Contamination and emission factors of PCDD/Fs, unintentional PCBs, HxCBz, PeCBz and polychlorophenols in chloranil in China

The production of chloranil is regarded as a potentially significant source of unintentional POPs. This research aimed to identify the contamination levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), hexachlorobenzene (HxCBz), pentachlorobenzene (PeCBz) and polychlorophenols in chloranil samples and identify the formation pathways. The toxicity equivalent (TEQ) values for PCDD/Fs in the chloranil samples ranged from 163 to 1 540 200 pg I-TEQ g⁻¹, while the PCB TEQ values ranged from 1.9 to 3.3 pg WHO-TEQ g⁻¹. High levels of HxCBz, PeCBz and polychlorophenols were also detected in the chloranil samples. The average emission factors were 522.2 mg I-TEQ t⁻¹ (PCDD/Fs), 0.0026 mg WHO-TEQ t⁻¹ (PCBs), 32.6 mg t⁻¹ (HxCBz), and 136.6 mg t⁻¹ (PeCBz). The PCDD/Fs and PCBs are thought to be formed from the polychlorophenols and polychlorobenzenes generated during the chloranil production process. Purification of the chloranil products can reduce the unintentional POPs releases and protect the environment.     

超高斯（分布）随机振动HALT试验剖面建立要点解析

本文介绍了超高斯（分布）随机振动HALT技术,对超高斯（分布）随机振动HALT试验剖面的建立提出了方法和建议,主要包括试验顺序的选择、应力强度的确定、步进量级的选择、驻留时间确定和试验停止原则等五方面,并总结了现场试验的要求和注意事项。     

基于GJB 150A-2009的高温试验方法研究

介绍了GJB 150换版后的基本信息,以图表形式给出了高温对装备的影响及比重。对GJB150A-2009中的高温试验方法及剪裁指南进行了研究,对高温试验应用要点进行了分析,并以某型号电子装备为例,建立了其寿命期剖面和寿命期环境剖面。     

Spatiotemporal dynamics of spring and stream water chemistry in a high-mountain area

The present study deals with the application of the self-organizing map (SOM) technique in the exploration of spatiotemporal dynamics of spring and stream water samples collected in the Chocho?owski Stream Basin located in the Tatra Mountains (Poland). The SOM-based classification helped to uncover relationships between physical and chemical parameters of water samples and factors determining the quality of water in the studied high-mountain area. In the upper part of the Chocho?owski Stream Basin, located on the top of the crystalline core of the Tatras, concentrations of the majority of ionic substances were the lowest due to limited leaching. Significantly higher concentration of ionic substances was detected in spring and stream samples draining sedimentary rocks. The influence of karst-type springs on the quality of stream water was also demonstrated.     

Vertical emission profiles for Europe based on plume rise calculations

The vertical allocation of emissions has a major impact on results of Chemistry Transport Models. However, in Europe it is still common to use fixed vertical profiles based on rough estimates to determine the emission height of point sources. This publication introduces a set of new vertical profiles for the use in chemistry transport modeling that were created from hourly gridded emissions calculated by the SMOKE for Europe emission model. SMOKE uses plume rise calculations to determine effective emission heights. Out of more than 40 000 different vertical emission profiles 73 have been chosen by means of hierarchical cluster analysis. These profiles show large differences to those currently used in many emission models. Emissions from combustion processes are released in much lower altitudes while those from production processes are allocated to higher altitudes. The profiles have a high temporal and spatial variability which is not represented by currently used profiles.     

Distribution of polychlorinated dibenzo-p-dioxins and dibenzofurans in ambient air of different regions in China

Levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were determined in fourteen ambient air samples collected in twelve cities of five provinces and one large municipality in China. The PCDD/F concentrations varied from 2.6 to 120 pg m⁻³ (or from 0.04 to 1.93 pg I-TEQ m⁻³). Generally, TCDF was the dominant homologue group and as a rule the homologue concentration of PCDF decreased with rising chlorine substitution number of PCDF. In all cases 2,3,4,7,8-PeCDF was the most important contributor to the I-TEQ value, accounting for 35–57% of the total I-TEQ value. Higher PCDD/F levels in ambient air were found during winter. The highest PCDD/F levels were found in Chengdu, Sichuan Province. In general, the PCDD/F levels in this study were in the same range as in other studies in China.     

Agricultural ammonia emissions inventory and spatial distribution in the North China Plain

An agricultural ammonia (NH₃) emission inventory in the North China Plain (NCP) on a prefecture level for the year 2004, and a 5 × 5 km² resolution spatial distribution map, has been calculated for the first time. The census database from China's statistics datasets, and emission factors re-calculated by the RAINS model supported total emissions of 3071 kt NH₃-N yr⁻¹ for the NCP, accounting for 27% of the total emissions in China. NH₃ emission from mineral fertilizer application contributed 1620 kt NH₃-N yr⁻¹, 54% of the total emission, while livestock emissions accounted for the remaining 46% of the total emissions, including 7%, 27%, 7% and 5% from cattle, pigs, sheep and goats, and poultry, respectively. A high-resolution spatial NH₃ emissions map was developed based on 1 × 1 km land use database and aggregated to a 5 × 5 km grid resolution. The highest emission density value was 198 kg N ha⁻¹ yr⁻¹.