Estimation of emission fluxes from a horizontal flux budget method, exemplified with determination of pesticide volatilization

The paper describes an experimental set-up designed to measure the volatilization of different pesticides after application under full-scale field conditions. The pesticides were sprayed around the circumference of a circle and measurements of meteorology and air concentrations of pesticides were taken in the centre of the circle. The paper describes how the dimensions like the radius of the circle and height of the mast in the experimental set-up are found from theoretical considerations. A method to increase the confidence of the flux calculations is described. It utilizes that several substances were applied simultaneously and that a certain parameter in the fitted concentration profiles depends on turbulence only and thus have the same value for all substances. The design was used during two campaigns, conducted on the same location, one during fall on bare soil and one in spring on a barley crop.     

Chirp浅剖仪在水域地质调查中的应用

基于线性调频技术的Chirp声学浅剖仪系统,较好地解决了探测深度以及分辨率这两个最令人关心但又互为矛盾的问题。该浅剖仪系统主要由导航系统、信号控制系统、信号发射系统、信号接受系统以及测深系统等5部分组成,理论上,其纵向地层分辨率为十几厘米左右,最大探测深度在百米左右,具体视地层以及水质等条件而定。考虑到该系统的特殊性和复杂性,对其关键操作进行了较为详细的描述。最后介绍了该系统在活断层调查、管线走向调查以及水底抛石调查等不同类型水域岩土工程勘察中的成功应用,表明其具有良好的应用前景。     

Synthesis of Poly(β-hydroxybutyrate) in Simulated Microgravity: An Investigation of Aeration Profiles in Shake Flask and Bioreactor

The microbial strain Azotobacter vinelandii UWD was grown under conditions of simulated microgravity in the National Aeronautics and Space Administration (NASA) Bioreactor. Bacterial growth in simulated microgravity differed significantly from that observed in conventional shake flask experiments: Cells tended to grow in a cluster-like pattern and polymer production started immediately after exposing them to conditions of simulated microgravity, and no lag time was observed. It was imperative to differentiate between the effects derived from microgravity and those imposed by the altered oxygen supply in the bioreactor. Aeration conditions were studied in both reactor types and a gas supply profile was developed for the bioreactor. This supply profile allowed for similar amounts of dissolved oxygen in the bioreactor and the shake flask in the initial stage of the fermentation and, therefore, for an evaluation of the effects of microgravity on biopolyester-producing bacteria. Since the optical density that is conventionally used as a measure for the cell growth could not be used due to the cluster-like growth pattern of the cells, it was determined that bacterial growth behavior in the bioreactor can be monitored through glucose or oxygen consumption.     

Emissions from burning biofuels in metal cookstoves

Promoting stoves that burn wood and other biofuels more efficiently is one of the means to reduce fuel consumption, but such efficient stoves may also emit more carbon monoxide and total suspended particulates. In an earlier study, a standard chamber method was proposed to estimate emission factors from burning fuelwood (Acacia nilotica). Here that methodology is extended to measure emission factors from burning of dungcakes and crop residues (Brassica or mustard stalks)—common fuels in many developing countries. The amounts of carbon monoxide (CO) and total suspended particulates (TSP) emitted by four different models of stoves, when using each of the three biofuels, are measured.The CO emission factors range from 13–68 (g/kg) for fuelwood to 26–67 g/kg for dungcakes and 20–114 g/kg for crop residues, for particulates they range from 1.1–3.8 to 4.1–7.8 and 2.1–12.0 g/kg for the three fuels, respectively. On a per unit heat delivered basis, the emissions of CO and TSP from both dungcakes and crop residues are two to three times higher compared to those from fuelwood. While for some improved stove-fuel combinations, the increase in emission factors was offset by the increase in thermal efficiency, this was not always so and causes a dilemma. The more efficient stoves are found to have higher emission factors of both CO and TSP for all three fuels. Emissions per standard task (i.e, on a unit heat delivered basis) is proposed as a criterion to evaluate cookstoves.     

Analysis of acylcarnitines in maternal urine for prenatal diagnosis of glutaric aciduria type 2

The urinary acylcarnitine profiles of two mothers whose first children were diagnosed to have glutaric aciduria type 2 (multiple acyl-CoA dehydrogenation deficiency, electron transfer flavoprotein (ETF) deficiency) were analysed in the second pregnancy. Large volumes of tigrylcarnitine and isovalerylcarnitine and a little glutarylcarnitine were detected. Each fetus was also diagnosed to be abnormal by enzyme activity and immunoassay of ETF protein. The acylcarnitines in the mothers' urine disappeared in 1 week after labour or artificial abortion. Acylcarnitines were never detected in the urine of controls.     

Emission modelling and validation of VOCs' source strengths in air-conditioned office premises

An emission model for indoor volatile organic compounds (VOCs) based on mass balance considerations has been presented and validated under steady state conditions. Comparison were made for the measured and predicted concentrations of 37 selected VOCs and TVOC through a case intervention study on the filters of the ventilation system in a new commercial air-conditioned office building. The intervention involved replacing media filters with electronic and carbon filtration. TVOC and 37 compounds selected for their health and comfort impact, representation of major chemical classes that occur in indoor air and their utility as markers of pollution sources were studied. The concentration levels predicted by the model were compared with actual measurements. Twenty-five target compounds and the TVOC were adequately described by the model where the measured concentrations were in agreement with the predicted concentrations. Modeling of the remaining 12 compounds was found to be affected by the emission rates that were occupant related.     

PM2.5 chemical source profiles for vehicle exhaust, vegetative burning, geological material, and coal burning in Northwestern Colorado during 1995

PM_2.5 (particles with aerodynamic diameters less than 2.5 μm) chemical source profiles applicable to speciated emissions inventories and receptor model source apportionment are reported for geological material, motor vehicle exhaust, residential coal (RCC) and wood combustion (RWC), forest fires, geothermal hot springs; and coal-fired power generation units from northwestern Colorado during 1995. Fuels and combustion conditions are similar to those of other communities of the inland western US. Coal-fired power station profiles differed substantially between different units using similar coals, with the major difference being lack of selenium in emissions from the only unit that was equipped with a dry limestone sulfur dioxide (SO₂) scrubber. SO₂ abundances relative to fine particle mass emissions in power plant emissions were seven to nine times higher than hydrogen sulfide (H₂S) abundances from geothermal springs, and one to two orders of magnitude higher than SO₂ abundances in RCC emissions, implying that the SO₂ abundance is an important marker for primary particle contributions of non-aged coal-fired power station contributions. The sum of organic and elemental carbon ranged from 1% to 10% of fine particle mass in coal-fired power plant emissions, from 5% to 10% in geological material, >50% in forest fire emissions, >60% in RWC emissions, and >95% in RCC and vehicle exhaust emissions. Water-soluble potassium (K⁺) was most abundant in vegetative burning profiles. K⁺/K ratios ranged from 0.1 in geological material profiles to 0.9 in vegetative burning emissions, confirming previous observations that soluble potassium is a good marker for vegetative burning.     

Characterisation and determination of profiles of polycyclic aromatic hydrocarbons in a traffic tunnel in Gothenburg, Sweden

The concentrations of semi-volatile polycyclic aromatic hydrocarbons (PAHs), hydrocarbons (HCs), particulate matter (PM 1, 2.5 and 10 μm) and total suspended particles (TSPs) were measured in a traffic tunnel in Gothenburg, Sweden. Emission factors (EFs) were also calculated. These variables are assumed to provide good estimates of average vehicle emissions, since all types of vehicle, using all types of fuel, pass through this tunnel. It was shown that the majority of particle-associated PAHs were found on particles with an aerodynamic diameter of <1 μm. The concentrations of PAHs were one order higher in magnitude in air samples from the tunnel than in air samples at two urban locations. However, the PAH profiles of air samples from the tunnel and the urban sites were similar. This was demonstrated using principal component analysis (PCA). Finally, and notably, there was no significant change in the total emissions when the proportion of heavy-duty vehicles (HDVs) increased from 8% to 24%. Previously, diesel vehicles had been found to release larger quantities of PAHs and related substances. Advances in fuel quality, and HDV motor and exhaust system design during the last decade may have contributed to this promising result. However, it was shown, using partial least squares regression to latent structures (PLS), that some of the parameters measured displayed correlations with the proportions of HDVs and light-duty vehicles (LDVs). Concentrations of total HCs, TSPs, dibenzothiopene, phenantrene, anthracene and monomethyl-derivatives of phenantrene and anthracene were all correlated to the proportion of HDVs. The concentrations of naphthalene, some mono- and dimethylnaphthalenes and most large PAHs (with 5–7 fused rings) were correlated to the proportion of LDVs.     

Mesoscale modeling of wintertime particulate matter episodes in eastern Washington, USA

The Spokane, Washington area is classified as a non-attainment area for the 24-h PM₁₀ standard due to a history of high particulate matter concentrations. A Eulerian regional air quality model (CALMET/CALGRID) has been used to characterize the emission, transport and dispersion of PM₁₀ and PM_2.5 in Spokane. Observations from a residential site (Rockwood, RW) and an industrial site (Crown Zellerbach, CZ), spanning July 1994–August 1996 were used to evaluate the current emission inventory. Two major tasks were devised to conduct the objectives of this investigation. First, a simple and efficient urban dispersion model (WYNDValley) was used to simulate important episodes characterized by the highest PM₁₀ and PM_2.5 concentrations. The selected episodes included four days with wet conditions for which no roads would have been emitting and seven days with dry conditions for which roads would emit. In the second step, a single road-emitting event was selected from the previous predicted results for further analysis using the Eulerian regional air quality model to examine the emission inventory. The urban and regional models predicted the observed concentration distributions reasonably well for the source emissions inventoried in Spokane. The mass concentrations of PM₁₀ were well predicted for the roads emitting case examined by both models indicating that the emission inventory based primarily upon area sources including roads is reasonably well characterized, at least at the RW site. The area sources around CZ are less well characterized, so that the PM₁₀ concentrations are underpredicted at CZ. The models appear unable to reach an equilibrium mass balance status at the beginning of the simulation, and the urban model seems unable to properly resolve the nocturnal boundary layer.