Human appropriation of net primary production as determinant of avifauna diversity in Austria

The relationship between land-use induced changes in production ecology and avifauna diversity was analysed using a GIS land cover dataset on a 0.25 km × 0.25 km grid covering Austria's national territory. Considering only aboveground processes, the “human appropriation of net primary production” (HANPP = potential NPP − NPP_t), actual NPP (NPP_act), harvest (NPP_h) and NPP_t (= NPP_act − harvest) were recalculated based on existing datasets. Elevation as well as indicators of land cover heterogeneity and landscape heterogeneity were also considered. Correlation analyses were performed between these potential determinants of avifauna diversity and breeding bird species richness data as well as the percentage of endangered breeding birds included in the Austrian red list. Four spatial scales—0.25 km × 0.25 km, 1 km × 1 km, 4 km × 4 km and 16 × 16 km, were analysed. It was shown that breeding bird species richness was more strongly correlated with production ecological indicators and elevation than with heterogeneity indicators. A residual analysis in which the effect of elevation (a proxy for climate) on species richness and its potential determinants was removed confirmed the importance of the availability of trophic energy (NPP) for bird diversity patterns. The results support the species-energy hypothesis, thus confirming the notion that HANPP could be a useful pressure indicator for biodiversity loss.     

钢绞线逐根张拉下锚墩基床沉陷所致锚索预应力损失问题

在预应力锚索锚墩下部地基岩土的基床系数较低情况下,采用钢绞线逐根张拉来施加预应力会导致较大的预应力损失以及各钢绞线较显著的预应力不均。基于锚墩基床岩土体的弹性压缩模型,理论探讨了钢绞线逐根对称循环张拉下的锚索预应力损失,及钢绞线的预应力均匀性问题。分析表明,基床系数越低,逐根张拉下的锚索预应力损失越大,且其所含各钢绞线预应力的均匀性越差;而同样荷载和基床系数下,锚索所含钢绞线根数越多, 逐根张拉后的预应力损失和不均匀性也越大。但采用分级循环张拉、正序张拉及调整、锚墩下部一定扩散角填石等工序及措施有助于减轻预应力损失和解决不均匀性问题。     

丘陵农村能源生态工程（连载）——新的生态能源开发与环境治理规划

在系统分析与初期实施的基础上，通过计算机仿真技术对后期～２０１０年提出进一步综合开发治理规划，并对规划实施的支撑条件进行了研究，这些研究丘陵农村的发展提供了具有参考意义的信息资料。     

平板载荷试验在深圳某工程中确定地基承载力

平板栽荷试验(PLT)是在一定面积的承压板上向地基土逐级加荷载,测求地基土的压力与变形特征的原位测试方法。文章在深圳地区岩土勘察中进行了一次平板栽荷试验,较为准确地确定了地基土的承载力和变形模量。结合工程实例,详细介绍了PLT的施工原理和方法,以期对类似场地勘察工程实施有一定的参考意义。     

氧化塘合理的设计与操作

氧化塘不但可以低费用的降解废水，而且可以提供有用的生物量，其关键是进行合理的设计、操作和去除污泥．本文综合国外的文献资料，提出合理的设计和操作方案，并且引用国外试验者开发的预测模型；同时提出操作过程加入适当的ＣａＣｌ２化学添加剂可以促进藻类生物量的絮凝，以保证出水的质量和提供可利用的生物量．     

功能区排放负荷污染系数百分比分配法研究

在考虑了总量控制区风频、风速和各功能区位置及污染源“影响范围”等影响因素的条件下，提出了“平均下风距离”的概念，从而建立了一种更为科学、合理的总量控制区内功能区排放负荷分配新方法。通过与 总量控制A值法所提出的面积分配方法相比较，验证了新方法的合理性和有效性。     

Graphical strategies for design of evaporation crystallization networks for environmental wastewater applications

This paper introduces graphical strategies for the design of an evaporation/crystallization network for ternary wastewater environmental applications. Sources, sinks and other streams are located on a ternary composition diagram. While a source is any wastewater stream that has the potential to be recycled, a sink is any unit in the process that can accept sources. The proposed methodology is extremely simple to understand and implement, as it only requires basic solid-liquid phase equilibria data and uses lever arm principles to generate alternative process designs. Geometric constructions are carried out on the ternary composition diagram and the respective lever arms are used to determine intermediate flow rates in the evaporation/crystallization network. The relative locations and flow rates of the sources and sinks under consideration, as well as the unique shape of the solid-liquid equilibrium, drive the design of the separation (via evaporation/crystallization) network. Some generic structures are proposed for a typical evaporation and crystallization network. Once the general problem statement has been defined, special cases consisting of a single source-single sink, single source-two sinks and two sources-single sink are described. These special cases are representative of commonly occurring industrial wastewater design problems. Several graphical insights are listed that allow one to represent evaporation and crystallization operations on a ternary triangular composition diagram and avoid mathematical complexity. The possibility of bypassing a part of the initial feed streams is also considered. Certain feasible composition regions are identified on the ternary composition diagram for cases dealing with multiple sources and sinks. The methodology is useful in pre-screening and eliminating certain sources/sinks and is readily applicable to cases with lower number of sources and sinks. A case study involving the ammonium nitrate manufacturing process is included to demonstrate the broad applicability and value of the proposed approach.     

水泥土桩复合地基桩土应力参数研究

本文首先通过理论分析，认为桩土应力比、桩土荷载分担比等是反映水泥土桩复合地基工作性状的重要参数。然后通过现场试验，研究桩土应力比、桩土荷载分担比随荷载变化的规律。结果认为：随着荷载增加，桩土应力比逐渐减小，当比值达到某一特征值后，不再发生明显变化；桩土应力比、桩土荷载分担比不为常数，其变化是桩土变形协调的结果。最后得出有一定参考价值的结论。     

氧化铝生产环境负荷指标及评价模型研究

针对氧化铝生产过程中的环境问题,建立了氧化铝生产环境负荷的资源消耗指标、能源消耗指标和环境排放指标。并就多产品环境负荷的分摊原则进行了说明。提出了定量计算氧化铝整个生产过程环境负荷的数学模型。用该模型不仅能计算出最终产品氧化铝的环境负荷,而且也可计算出各中间工序产品的环境负荷,这为改善氧化铝的环境负荷提供了依据。