生产环境与生产安全

建设良好的生产环境能有效促进安全生产,搞好生产环境应从搞好硬件建设和软件建设两个方面着手.     

前混合式磨料射流系统的容积效应及有关安全问题

前混合式磨料射流系统具有明显的容积效应。通常情况下 ,系统在停止工作压力降低时 ,磨料罐将排出约 1 L的浆液 ,在长 5 m以上的管路中淤积 ;重新工作时 ,将造成喷嘴和管路的严重磨损 ,甚至造成堵塞 ,使系统不能正常工作。为此 ,笔者提出了一种新型的射流发生系统 ,改善系统的容积效应 ,在其停止工作时 ,采用了磨料罐从上方排出清水以降低系统压力方法 ,改善磨料大量涌出和管路淤积现象 ,同时也对管接头等磨蚀引起的有关安全问题进行了讨论。     

迈向21世纪的锅炉、压力容器、压力管道和特种设备安全科学技术

保护环境、发展经济关系到人类的前途和命运 ,是当今国际社会十分关注的重大问题。在我国 ,人们生产、生活中的安全问题是实现保护环境与发展经济的过程中需要研究解决的热点、难点问题。锅炉、压力容器、压力管道和特种设备涉及到社会生产和人民生活的各个方面 ,其安全及可靠性问题受到国家和各级政府的高度重视 ,因此 ,在市场经济发展的新形势下 ,如何有效地治理危险或危害设施、场所 ,最大限度地扼制并减少伤亡事故 ,是锅炉、压力容器、压力管道和特种设备安全科学技术需要认真解决的重要课题。     

医院安全保障中的技术因素

医院安全保障体系的技术构成包括安全的诊疗救护技术、后勤供养技术和安全保卫技术。其技术特点是以人为本 ,服务健康 ,应急性强 ,发展迅速 ,互相影响。本文提出了医院安全保障体系改革的构想和建立医院安全保障体系中应考虑的技术因素。     

既有住宅加装电梯重点问题分析与建议

目前全国既有住宅加装电梯工作还存在诸多问题,本文通过收集分析法规、文献资料、实地调研、交流研讨、召开专家咨询会等方式对既有住宅加装电梯工作在各个环节上存在的问题进行总结,并对加装电梯设计、地基、井道、应急救援、使用管理等方面提出安全要求建议,为监察管理、检验检测、安装使用等相关部门提供参考。     

复合碳纤维混凝土的结构安全监测方法

提出了一个利用碳纤维混凝土与普通混凝土进行复合,实现结构安全监测的技术方法。根据普通混凝土与碳纤维混凝土之间良好的亲和能力,将碳纤维混凝土浇铸在结构承载的薄弱部分,利用碳纤维混凝土的压敏特性,可以对该部分的服役状态进行监测,获得结构的变形情况;另一方面,利用碳纤维混凝土的基本特性,还可以适当改善结构的承载强度。笔者所提出的复合结构既具有普通混凝土结构的基本特征,又赋予了结构的自我监测功能,比较有效地克服了全碳纤维混凝土结构建造所面临的电阻率波动、骨料石子影响和建设成本等几个方面的技术问题。     

A comparative study on the autoxidation of dimethyl ether (DME) comparison with diethyl ether (DEE) and diisopropyl ether (DIPE)

The Japanese government is planning to introduce DME as a substituted energy for oil and LNG. Introduction of DME could contribute greatly to both the prevention of global warming and the formation of resource-recycling societies. In these circumstances, a safety assessment of DME is very important when DME is used on a large scale. There is a possibility that prolonged exposure in air induces autoxidation to produce explosive organic peroxides during transportation and storage of DME. Therefore, the reactivity of DME with oxygen and the mechanism of the autoxidation were investigated. Accelerating Rate Calorimetry (ARC) was used to evaluate the thermal stability of DME and DIPE, a known peroxide producers, under adiabatic and various atmospheric conditions. In ARC studies of DME under oxygen, exothermic decompositions were detected although its self-heating rate was low in comparison with DIPE. Oven storage tests were carried out and iodimetry was used to measure the concentration of peroxides produced from DME in comparison with DIPE and DEE. However, no products could be found for DME either by GC/MS or by iodimetry, while some evidence of autoxidation of both DEE and DIPE were obtained from these experiments.     

太原市蔬菜中铅、铬和镉含量分析及安全性评价

笔者采用原子吸收光谱法 ,测定了太原市蔬菜批发市场的 8种蔬菜 72个样品的铅、铬、镉含量。结果表明 :在检测的 8种蔬菜中 ,有 5种蔬菜出现铅含量超标 ,铅是蔬菜中的主要污染元素 ,且污染带有普遍性 ;铬的污染仅出现在芹菜和青菜上 ,其他 6种蔬菜均无超标 ;8种蔬菜均未受到镉的污染 ,合格率为 10 0 %。参照国家食品卫生标准和蔬菜质量分级标准 ,对蔬菜的重金属污染程度进行了安全性评价。在所检测的蔬菜样品中 ,只有青菜受到重金属污染 ,其综合污染指数为 1.12 ,污染程度为轻度污染。其他蔬菜的综合污染指数均低于 0 .7,污染程度均为安全 ,污染水平均为清洁。     

我国重点行业环境保护与节能减排宏观要求及政策建议

从我国目前节能减排的形势出发,结合几大高污染、高能耗行业的环保现状,给出了能够实现环保与节能减排的总体原则并重点提出了相应的宏观政策建议。     

Occupational injury rates among Norwegian farmers: A sociotechnical perspective

Introduction: This study addressed relative injury risk among Norwegian farmers, who are mostly self-employed and run small farm enterprises. The aim was to explore the relative importance of individual, enterprise, and work environment risks for occupational injury and to discuss the latent conditions for injuries using sociotechnical system theory. Method: Injury report and risk factors were collected through a survey among Norwegian farm owners in November 2012. The response rate was 40% (n = 2,967). Annual work hours were used to calculate injury rates within groups. Poisson regression using the log of hours worked as the offset variable allowed for the modeling of adjusted rate ratios for variables predictive of injury risk. Finally, safety climate measures were introduced to assess potential moderating effects on risk. Results: Results showed that the most important risk factors for injuries were the design of the workplace, type of production, and off-farm work hours. The main results remained unchanged when adding safety climate measures, but the measures moderated the injury risk for categories of predominant production and increased the risk for farmers working with family members and/or employees. An overall finding is how the risk factors were interrelated. Conclusions: The study identified large structural diversities within and between groups of farmers. The study drew attention to operating conditions rather than individual characteristics. The farmer’s role (managerial responsibility) versus regulation and safety climate is important for discussions of injury risk. Practical Applications: We need to study sub-groups to understand how regulation and structural changes affect work conditions and management within different work systems, conditioned by production. It is important to encourage actors in the political-economic system to become involved in issues that were found to affect the safety of farmers.