自然环境因素对铝合金大气腐蚀的影响性研究

目的 研究铝合金大气腐蚀受自然环境因素的影响性，探索环境因素对铝合金腐蚀的影响规律。方法 采用多层感知器神经网络分析环境因素对7种铝合金平均腐蚀速率的影响。结果 确定了影响铝合金腐蚀损伤的重要因素为SO2沉积率、Cl^–沉积率、NOx沉积率；辅要因素为年降雨量、年雾露时数、相对湿度、年日照时数、温度、铝合金成分；次要因素为年累积降水时数、雨水pH值。结论 基于多层感知器神经网络分析有效展现了环境因素对平均腐蚀速率的影响性。     

Variation of crack intensity factor in three compacted clay liners exposed to annual cycle of atmospheric conditions with and without geotextile cover

Performance of compacted clay liners commonly used as landfill barrier systems can be subject to decline in terms of hydraulic conductivity if left exposed to atmospheric conditions for an extended period of time prior to placement of overlaying layers. The resulting desiccation cracking can lead to increased hydraulic conductivity. Desiccation crack intensity was studied for three clayey soils commonly used for construction of landfill barrier system in a relatively large scale test setup exposed to real time atmospheric conditions over a complete annual cycle. A white separator geotextile cover was presumed to be capable of reducing the intensity of desiccation cracking through absorbing and maintaining higher amounts of moisture and reducing the temperature of the soil surface in comparison to a directly exposed soil surface. Desiccation cracking was monitored using a digital imaging technique for three compacted clay liners in two sets, one open to air and the second covered with the white geotextile. Crack intensity factor approached a relatively stable phase after certain cycles corresponding to atmospheric dry wet cycles. The results indicated that the white separator geotextile was capable of reducing the crack intensity factor by 37.4–45.9% throughout the experiment including the cyclic phase of desiccation cracking. During the stable phase, the maximum reduction in crack intensity factor of 90.4% as a result of applying geotextile cover was observed for the soil with the lowest plastic index and clay content and therefore the lowest magnitude of crack intensity factor. The other two soils with similar clay content but different plastic index showed 23.6% and 52.2% reductions in crack intensity factor after cyclic phase when covered with geotextile.     

The nexus between eco-friendly technology and environmental degradation in India: Does the N or inverted N-shape load capacity curve(LCC) hypothesis hold?

This study aims to investigate the impact of eco-friendly technology on environmental degradation indicated using the load capacity factor (LCF) with the framework of the Load Capacity Curve (LCC) hypothesis. In this regard, an environmental degradation function is formed and analyzed using the Augmented Autoregressive Distributed Lag (AARDL) approach during the period spanning from 1975 to 2021 for India. The outcome indicates that eco-friendly technology reduces the LCF, thereby fostering environmental degradation in the long run, but the relationship is not significant in the short run. Further, an N-shaped LCC hypothesis has been observed in both long and short runs. Besides, energy consumption exhibits a LCF reducing or environmental degradation boosting role in the short run and long run. These findings are consistent with other models that are used to check the robustness of AARDL-based results. Thus, the study recommends policies for promoting eco-friendly technology, judicious economic growth, and cautious energy consumption to attain sustainable development by increasing the LCF in India.     

Exhaust emission inventory of typical construction machinery and its contribution to atmospheric pollutants in Chengdu, China

To study the emission characteristics of typical construction machinery in Chengdu, 12 construction machinery (excavators, bulldozers, loaders, and forklifts) under idling mode, moving mode, and working mode, were tested using a portable emission measurement system (PEMS). Under three operating modes, the typical construction machinery in the working mode was higher in the fuel-based average emission factors of PM_2.5 and NO_x, while the fuel-based average emission factors of HC and CO were higher in idling mode. Integrated the results of investigation on ownership and activity levels of construction machinery, an exhaust emission inventory of typical construction machinery of Chengdu in 2018 was established according to the recommendation method. The annual emission of PM_2.5, NO_x, HC, and CO were 1.67 × 10⁶, 1.61 × 10⁸, 3.83 × 10⁶, and 1.26 × 10⁷ kg, respectively, and the excavator contributed the maximum emissions, accounting for an average proportion of 43.95%. The emission of construction machinery in Chengdu exhibited a clear monthly trend, with the highest from April to October and the lowest from November to March. In addition, the exhaust emissions presented an obvious spot-like characteristics, and the high-value areas were mainly concentrated in the surrounding suburban counties such as Shuangliu Wenjiang etc. To reduce pollution from construction machinery and improve the quality of the atmospheric environment, more effective measures on housing construction and municipal construction should be taken in those districts in Chengdu.     

危险度评价法与蒙德法在焦化装置中的对比应用研究

通过危险度评价法与蒙德法评分项目的比较分析,得出危险度评价法中的压力、温度和操作参数,反映在蒙德法中,表现为特殊工艺危险性的评分项,这表明利用简单、直观的危险度评价法,在一定程度上,可以表征复杂单元的危险性大小,且与蒙德法的评价相一致.以焦化装置为例子,首先只针对压力、温度和操作三个参数,运用两种评价法分别进行评价,得出的结论相一致,验证了上述结论；然后分别用两种方法对焦化装置进行评价,分析对比结果,危险度评价法在参数选取和运行中,更加简单直观,可以为蒙德法提供装置各单元危险性高低的依据并缩小评价的范围.蒙德法是危险度评价的拓展与延伸,它将危险度评价法得出的危险性高的单元,更深入的找出导致危险性高的原因与参数.     

Challenge of China's Population and Environment and Its Countermeasures

Abstract

The overgrowth of population and deterioration of environment are two serious problems of China. They pose a strong challenge to China's economic and social development. This article discusses the challenge and proposes some countermeasures for China to cope with these problems.     

Bioaccumulation Kinetics and Bioconcentration Factor of Chlorinated Pesticides in Tissues of Puntius ticto (Ham.)

Abstract

Bioaccumulation kinetics and bioconcentration factor (BCF) of chlorinated pesticides like Aldrin, Dieldrin, Benzene hexachloride (BHC), and Dichloro-diphenyl-dichloro-ethane (DDT) in fish tissues of Puntius ticto was studied in detail in a continuous fed system. The bioconcentration process is summarized by using a first order uptake model and the steady-state BCF is calculated based on the 30 days exposure. Rate of bioaccumulation of DDT was maximum of 4.6432 µg g^?1 wet weight per day in liver tissue whereas it was minimum of 0.0002 µg g^?1 wet weight per day in case of Dieldrin in the muscle tissue among the pesticides. It was observed that DDT showed maximum BCF of 89,010 in case of liver tissue of the fish exposed to 30 days. The regression coefficient (r ²) between pesticide concentration and exposure time varied between 0.6212 and 0.9817 indicating high correlation. Based on actual calculated BCF values, the octanol–water partition coefficient (K _ow) values were predicted. In order to prove the hydrophobic property of chlorinated compounds and its affinity towards lipid, the K _ow is predicted. Results showed that pesticide burden differ from tissue to tissue and can be correlated to the lipid content, size, exposure time, and species.     

磺酰脲类除草剂及其主要降解产物分配系数的测定与预测

本文测定了甲黄隆，氯黄隆，苄嘧黄隆及其主要降解产物取代磺胺和取代氮杂环化合物的辛醇－水分配系数，研究了反相高效液相色谱容量因子、分子连接性指数、Ｌｅｏ碎片常数与分配系数间的相关关系，从而建立了估算磺酰类除草剂及其降解产物的疏水性方程。     

井下运输安全性的灰色综合评判

以平顶山煤业（集团）公司一矿（简称平一矿）为例,运用灰色系统理论,对井下运输系统的安全性进行了灰色综合评判,指出了影响运输安全的人、机、环境各因素中存在的问题,并提出了相应的提高安全性的措施。     

成都市区夏季大气污染物浓度时空变化特征分析

为了解成都市区大气污染物浓度水平及其变化规律,统计分析了2013年6月1日—8月31日3个市区站点(十里店、梁家巷和草堂寺)SO2、NO2、O3、PM2.5、PM10和CO逐时观测资料.结果表明,观测期间O3污染严重,上述3个站点小时均值超标率分别达22%、37%和42%.大气颗粒物污染也较为严重,上述3个站点PM10日均浓度超标率分别为13%、8%和3%,而PM2.5日均值超标率分别高达34%、27%和26%.NO2和CO早晚的浓度高峰主要与机动车流量增加和混合层高度降低有关.由于紫外辐射影响,O3浓度在正午出现峰值.受机动车流量高峰和气象条件的影响,PM2.5和PM10最大值和最小值分别出现在上午和下午.通过对污染物"周末效应"的分析,发现周末O3、PM2.5和PM10的浓度显著高于工作日,SO2、NO2和CO反之.成都市区大气污染受局地排放和外源输送共同影响,其中PM10和NO2主要受局地源控制,而PM2.5、SO2和O3受外输送影响较大.