Life-cycle phosphorus use efficiency of the farming system in Anhui Province,Central China

The rapid increase of phosphorus (P) use in farming has raised concerns regarding its conservation and environmental impact. Increasing the P use efficiency (PUE) is an approach to mitigating these adverse impacts. In this study, we applied substance flow analysis (SFA) to establish a life-cycle P use efficiency model to determine the life-cycle PUE of the farming system used in Anhui Province in 2011, which is typical of the agriculture practiced in central China. Based on this model, the P flows and PUEs of five subsystems were identified and quantified: crop farming, crop processing, livestock breeding, rural living, and urban living. The three largest P flows were found in the crop farming and livestock breeding subsystems; it can therefore be concluded that these subsystems have substantial impacts on the entire farming system. In contrast, the PUEs of crop farming, rural consumption, and livestock breeding subsystems presented the three lowest PUEs (58.79%, 71.75%, and 76.65%, respectively). These results were also consistent with the finding that the greatest P losses occurred in crop farming and livestock breeding. Consequently, the study proposes that great potential exists for increasing PUEs in the farming system of Anhui, and several of the most promising measures could be combined for improving PUEs. Finally, the study assesses data quality and presents a sensitivity analysis for use in interpreting the results. The study also shows that improving PUE and decreasing P losses in farming systems through improved nutrient management must be considered an important issue, and this study represents valuable experience in resource conservation and agricultural development in China.     

西藏环境信息化基础建设设计实践

描述了西藏环保厅“西藏自治区环境保护厅环境信息化能力建设项目”前期调研、设计的过程,总结在西藏信息化发展基础差、技术人才少、资金投入紧张、稳定性要求高、信息技术发展迅速等现实情况下基础信息化项目建设前期设计特点,为西藏或其他欠发达地区信息化基础建设项目设计提供参考。     

Environmental resource footprinting of drug manufacturing: Effects of scale-up and tablet dosage

The formulation and scale-up of batch processes is one of the major challenges in the development of pharmaceutical dosage forms and at the same time a significant resource demanding process which is generally overlooked in environmental sustainability assessments. First, this paper proposes general trends in the experience curve of cumulative resource consumption of pharmaceutical tablet manufacturing of PREZISTA^® 800 mg through wet granulation (WG) at four consecutive scales in both R&D and manufacturing environments (resp. WG1 = 1 kg/h, WG5 = 5 kg/h, WG30 = 30 kg/h and WG240 = 240 kg/h). Second, the authors aim at evaluating the environmental impact from a life cycle perspective of a daily consumption of PREZISTA^® 2× 400 mg tablets versus the bioequivalent PREZISTA^® 800 mg tablet which was launched to enhance patient compliance. Environmental sustainability assessment was conducted at three different system boundaries, which enables identification, localization and eventually reduction of burdens, in this case natural resource extraction. Exergy Analysis (EA) was used at process level (α) and plant level (β) while a cradle-to-gate Exergetic Life Cycle Assessment (ELCA) was conducted at the overall industrial level (γ) by means of the CEENE method (Cumulative Exergy Extraction from the Natural Environment). Life cycle stages taken into account are Active Pharmaceutical Ingredient (API) production, Drug Product (DP) production and Packaging. At process level (α), the total resource extraction for the manufacturing of one daily dose of PREZISTA^® (800 mg tablet) amounted up to 0.44 MJ_ex at the smallest scale (WG1) while this amount proved to be reduced by 58%, 79% and 83% at WG5, WG30 and WG240 respectively. Expanding the boundaries to the overall industrial level (γ) reveals that the main resource demand is at the production of the Active Pharmaceutical Ingredient (API), excipients, packaging materials and cleaning media used in DP production. At the largest scale (WG240) the use of cleaning media during DP production contributes considerably less to the total resource extraction. Overall, the effect of scale-up and learning on resource consumption during DP production showed to possess a power-law experience curve y = 2.40 * x^−0.57 when shifting from WG1 (smallest lab scale) to WG240 (industrial manufacturing). Tablet dosage (2× 400 mg versus 1× 800 mg) did not significantly affect the absolute environmental burden. However, the relative contribution of resource categories did change due to the different production technology. It could be concluded that in meeting social and economic demands by launching the PREZISTA^® 800 mg tablet, no trade-off in environmental burden occurred. On the long term, future research should strive to take into account R&D processes and all services related to pipeline activities taking place prior to market launch and eventually to allocate impacts to the final product.     

Users' views of hospital environmental quality: Validation of the Perceived Hospital Environment Quality Indicators (PHEQIs)

Environmental Quality Perception (EQP) is an important construct used to help to understand the relationship between people and the hospital environment. From a patient-centered care perspective, it is important that hospital design take into account the patients' (and other users') point of view. This paper presents the adaptation and validation of a measure of hospital EQP, the Perceived Hospital Environment Quality Indicators (PHEQIs; Fornara, Bonaiuto, & Bonnes, 2006), and seeks to confirm the factor structure of this construct in a different cultural context. Three scales, two focusing on physical environments and one evaluating the social environment, were completed by 562 users of four orthopedic units in Portuguese hospitals, two older and two recently built or renovated. To assess criterion validity, hospital physical environments were also objectively evaluated by two architects. Using a confirmatory factor analysis the three validation procedures produced acceptable fit indices in the final measurement models. Overall reliability values were satisfactory, as was the evidence for criterion validity. PHEQIs scales and factors correlated with global evaluation of the environment, supporting concurrent criterion validity; and predictive criterion validity was demonstrated given that users of older and newer hospitals differed significantly on the perception of quality of hospital EQP, and that high congruence between users' and experts' evaluations was found. Discriminant construct validity was supported, and some difficulties in showing convergent validity are discussed in terms of item formulation adequacy. Implications for research and practice are described.     

Current status and trends of the environmental performance in European ports

This paper investigates the current status and trends over time in the environmental performance of European ports. The research is based on the provision of data from 79 European ports on issues related to their environmental management, environmental priorities and current environmental monitoring practices. This study updates previous environmental reviews, so that the trends over time are drawn. For instance, 90% of respondent ports stated that they have an environmental policy and 94% of ports have designated environmental personnel. The percentage of ports that have an Environmental Management System has increased by +33% in the last 9 years. Air quality, port waste and energy consumption emerged as the three major environmental priorities of the European port sector in 2013. The research also reveals the diversity amongst European ports in terms of size and physical surroundings. Some examples are presented on specific initiatives carried out by sector organisations about the Top-10 port priority issues. The future expectations of European ports on data collection and reporting are described.     

Environmental impacts of residual Municipal Solid Waste incineration: A comparison of 110 French incinerators using a life cycle approach

Incineration is the main option for residual Municipal Solid Waste treatment in France. This study compares the environmental performances of 110 French incinerators (i.e. 85% of the total number of plants currently in activity in France) in a Life Cycle Assessment perspective, considering 5 non-toxic impact categories: climate change, photochemical oxidant formation, particulate matter formation, terrestrial acidification and marine eutrophication. Mean, median and lower/upper impact potentials are determined considering the incineration of 1 tonne of French residual Municipal Solid Waste. The results highlight the relatively large variability of the impact potentials as a function of the plant technical performances. In particular, the climate change impact potential of the incineration of 1 tonne of waste ranges from a benefit of ?58 kg CO₂-eq to a relatively large burden of 408 kg CO₂-eq, with 294 kg CO₂-eq as the average impact. Two main plant-specific parameters drive the impact potentials regarding the 5 non-toxic impact categories under study: the energy recovery and delivery rate and the NO_x process-specific emissions. The variability of the impact potentials as a function of incinerator characteristics therefore calls for the use of site-specific data when required by the LCA goal and scope definition phase, in particular when the study focuses on a specific incinerator or on a local waste management plan, and when these data are available.     

Environmental assessment of dehydrated alfalfa production in Spain

Alfalfa is the major forage crop produced in temperate regions worlwide. Although this crop is currently used mainly for producing high-value livestock feed, its application for bioenergy production is a recent focus of interest. Even though it is not mandatory, alfalfa is normally dried in order to improve the quality of the final product. In this study, Life Cycle Assessment (LCA) was used to quantify the environmental impacts linked to alfalfa production in the major cultivation zone in Spain (Ebro Valley), including field activities, dehydration and transport to farms for livestock feeding. In addition, the identification of the most relevant processes contributing to the environmental impact and the potential improvements actions were also defined as objectives. Inventory data were obtained mainly from interviews with farmers complemented with published literature and comments from experts.LCA results were obtained for global warming, acidification, eutrophication, photochemical oxidant formation, land use, non-renewable cumulative energy demand and human, terrestrial and aquatic ecotoxicities. Within the life cycle of alfalfa, the dehydration process, production of phosphate fertilizer, application of nitrogen fertilizers and pesticides, water consumption and final transport to the consumer (by road and ship) were identified as hot spots. Based on these, some improvement measures were proposed and evaluated: (i) reduction of the moisture content of alfalfa and the use of a higher percentage of biomass for combustion in the dehydration process, (ii) no application of nitrogen fertilizer in maintenance years and (iii) use of more efficient trucks for transport. Their implementation would produce significant reduction of eutrophication, global warming, acidification, non-renewable cumulative energy demand and, to a lesser extent, photochemical oxidation formation and human toxicity impacts.     

A Phenomenological Perspective on Ethical Duty in Environmental Communication

This article examines the framing of environmental risks and natural disasters in factual entertainment television programs of the early 2000s, a hybrid form combining techniques from documentary with techniques such as dramatic reconstructions and computer-generated imagery from entertainment genres. Using qualitative frame analysis, it examines a range of factual entertainment television programs' framing of environmental risk and natural disasters in terms of their attitudes, representation of human participants and visual composition. The article considers the similarities and differences in the framing of natural disasters as factual entertainment compared to the framing of natural disasters in news, documentary and fiction film. It argues that such programs offer representational frames both consonant with and distinct from other media and concludes that they problematically offer a predominantly fatalistic response to environmental risk, constructing natural disasters as voyeuristic spectacles for vicarious entertainment.