环境学习曲线与我国碳减排目标的地区分解

2009年我国政府提出:2020年碳排放强度在2005年的基础上降低40%～45%,这是我国应对全球气候变化的重要举措. 依据环境技术经济学的有关理论,运用1995—2007年的有关统计数据,建立了我国大陆30个省区(省、市、自治区)碳排放环境学习曲线(ELC),并依据ELC模型预测了碳排放强度和碳减排潜力. 结果发现,按照过去12 a的自然趋势,2020年各省区的碳减排潜力为15%～58%,全国碳减排总潜力为30.6%. 从“需求”与“可能”出发,将9.4%的缺口按比例分配到9个高碳省区,并依此重新计算各省区碳减排目标和分担率.      

规划环评中景观非生态功能影响评价实例

以景观概念作为融合自然与社会、科学与美学、理性与感性的结合点,研究了景观非生态功能的内涵及其评价技术理论框架,从景观功能中提炼出景观非生态功能概念,初步完成景观非生态功能评价指标体系的构建.评价技术体系设计突出环境影响评价中现状评价的客观性以及影响预测的科学性.以人感尺度下的评价对象——景观单元概念为创新点,该评价体系补充并完善了现有景观评价体系的技术链条,在保证评价精度的前提下,简化并规范了评价工作流程.该评价体系沿用现有环境影响评价所广泛采用的现状评价、影响源分析、影响预测评价及措施建议的技术思路,基本能满足现行技术规范的要求.以武汉市后官湖生态宜居新城规划环评为例,验证了该体系的可操作性,为我国规划环评在景观评价技术领域的发展提供理论和实践参考.      

Emergy analysis applied to the estimation of the recovery of costs for water services under the European Water Framework Directive

In this paper, the European Union's Water Framework Directive 2000/60/EC (WFD) that is intended to foster protection of water resources is examined, focusing on the improvement of ecological and chemical quality of surface and groundwater. The WFD includes the concept of full cost recovery (FCR) in accordance with the Polluter-Pays Principle, as one of the tools of an adequate and sustainable water resource management system. The WFD defines three different costs associated with water: resource costs (RC), financial costs (FC), and environmental costs (ECs).The FCR of water is examined from a biophysical perspective using emergy evaluation to: (1) establish resource values of water from different sources, (2) establish the full economic costs associated with supplying water, and (3) the societal costs of water that is used incorrectly; from which the resource costs, financial costs, and environmental costs, respectively, can be computed. Financial costs are the costs associated with providing water including energy, materials, labor and infrastructure. The emergy based monetary values vary between 0.15 and 1.73 €/m³ depending on technology. The emergy based, global average resource value (from which resource costs can be computed) is derived from two aspects of water: its chemical potential and its geopotential. The chemical potential monetary value of different sources such as rain, groundwater, and surface water derived from global averages of emergy inputs varies from 0.03 to 0.18 €/m³, depending on source, and the geopotential values vary from 0.03 to 2.40 €/m³, depending on location in the watershed. The environmental costs of water were averaged for the county of Spain and were 1.42 €/m³.Time of year and spatial location within the watershed ultimately influence the resource costs (computed from emergy value of chemical potential and geopotential energy) of water. To demonstrate this spatial and temporal variability, a case study is presented using the Foix watershed in northeastern Spain. Throughout the year, the resource value of water varies from 0.21 to 3.17 €/m³, depending on location within the watershed. It is concluded that FCR would benefit from the evaluation of resource costs using spatially and temporally explicit emergy accounting.     

A System for Measuring Vertical Concentration Profiles of Gaseous Pollutants,Using Carbon Dioxide as a Case Study

An electronically-controlled sampling system, characterised by its organ pipe design, has been developed for sampling air sequentially, at different heights within the breathing zone. Data are automatically logged at the different receptor levels, for the determination of the average vertical concentration profile of gaseous pollutants. The system has been coupled to a carbon dioxide monitor and used in a brief study of the spatial and temporal variation of indoor carbon dioxide concentration. The system can easily be extended for different heights or modified for use with other types of gas monitor. The results of a trial run, which was carried out in a coffee room, are presented and applications of the Organ Pipe Sequential Sampling (OPSS) system are discussed.     

Escherichia coli Concentrations in Urban Watersheds Exhibit Diurnal Sag: Implications for Water‐Quality Monitoring and Assessment

The variability of indicator bacteria over a fine resolution time scale on the order of minutes has yet to be fully understood. In this study, we collected more than 700 Escherichia coli samples at a 10‐ and 30‐min resolution in an urban watershed in Houston. A Bacteria Diurnal Sag (BDS) marked with daytime exponential decay followed by an exponential nighttime regeneration was observed. This pattern was observed during all sampled events but varied depending on other variables. The concentrations during a 24‐h period varied 1 to 5 orders of magnitude and the fecal load was at least 10 times lower than what would be obtained using a single morning E. coli measurement, the typical sampling scheme in most monitoring programs. Decay rates, ranging from 3.67 to 24.7/day, decreased E. coli concentrations to below the water‐quality standards from 14:00 to 18:00 h and were strongly influenced by water temperatures and solar radiation intensities. Rapid regeneration occurred on the order of 9.41 to 64.1/day allowing E. coli concentrations to return to their pre‐decay levels. The data indicated that four to six samples taken between 06:00 and 18:00 h may be sufficient to define the BDS depending on stream conditions, and that a threshold concentration of approximately 100 MPN/dl (most probable number in a deciliter) existed for the studied urban watershed. These findings have significant implications for water‐quality monitoring, regulation, and compliance.     

Evaluation of recycling efforts of aircraft companies in Wichita

The number of manufactured aircraft has been continuously increasing worldwide because of the high demand for airline transportation. During manufacturing, many advanced materials and devices are used to build various sizes and shapes of aircraft. However, most of these materials and devices require considerable energy and labor to produce, so reusing these at any life stage of the aircraft offers many economic and environmental benefits, and is considered lucrative and environmentally responsible. Several recyclable materials—composites, metals and alloys, wires, wood, paper, plastics, electronics, and avionics—emerge as waste streams during the manufacturing of aircraft. Many aircraft companies have been recycling these materials to remanufacture aircraft parts or other products for more sustainable production. In the present study, we evaluated the recycling efforts of local aircraft companies in Wichita, KS. These efforts were considered in terms of recycling efficiency/rate and environmental benefits. These included cradle-to-gate (CTG) life-cycle inventory analysis of the materials, carbon dioxide emissions, virgin material replacement with recycled materials, and natural resources usage. Our findings show that there exists a significant potential for contributions to sustainability as well as environmental and health benefits in the region from recycling by aircraft manufacturing plants.     

Monitoring and environmental modeling of earthwork impacts: A road construction case study

This study presents the contributions of materials, earth engineering machines and construction techniques to potential environmental impacts from the main items of typical road earthworks. To achieve this goal, the overall activity at a 1.9-km long French earthworks project site for a heavily trafficked highway was surveyed during its 2007–2009 construction period. Using data collected and a numerical model of road life cycle assessment (LCA), i.e. ECORCE, six indicators could be evaluated, namely: energy consumption, global warming potential, acidification, eutrophication, photochemical ozone creation, and human chronic toxicity. When available, several life cycle inventories were implemented in order to appraise indicator sensitivity with respect to the considered panel of pollutants. Results also allowed estimating from an LCA point of view: (i) the conservation of both aggregates and soil as induced by quicklime treatment and (ii) the duration necessary for projected traffic levels to offset the potential environmental impacts of the earthworks stage.     

Approaches to developing risk management objectives: an analysis of international strategies

Risk assessment/management frameworks employed around the world to guide environmental decision-making were analyzed for their approaches to developing risk management objectives and the decision criteria necessary for environmental policy implementation. Frameworks from the Netherlands, the UK, Sweden, Australia/New Zealand, Canada, and the USA were considered. Progress in refining the scientific basis for risk assessment/management has been made, but there has been little parallel development in defining the mechanisms by which available scientific information may be used to define risk management goals or identify and select between management options using a priori decision criteria. The lack of detailed guidance on the setting and achievement of risk management goals that appropriately balance technical information and public input remains an important challenge to the use and practice of all risk assessment/management frameworks.     

固定燃烧源颗粒物稀释采样系统的研制与应用

为研究固定燃烧源颗粒物排放特征,研制开发了稀释烟道采样系统.该系统能模拟高温烟气排放到大气中的冷却、稀释、凝结等物理化学过程,捕集燃烧源排放的一次颗粒物.详细阐述了采样系统的结构并对系统进行了检验.整个采样系统稳定度高,测量结果可靠,操作简便.采样系统小型化设计,适合于现场应用.该系统已成功应用于我国典型燃烧源颗粒物排放特征研究.     

Corporate environmental responsibility in the supply chain

A continuing trend in outsourcing increases the complexity of supply chains. Global supply chains extend over numerous echelons of countless companies. In parallel, the company-internal view on corporate environmental responsibility is being challenged as customers and legislation alike broaden a company's environmental responsibility to include organisations' upstream as well as downstream in the supply chain. Therefore, the aim of this study was to examine corporate environmental responsibility beyond corporate boundaries, i.e. in the supply chain. A cross-industrial study based on 16 case studies in Finnish trans-national corporations sheds light on various dimensions of corporate environmental responsibility upstream and downstream of product and process supply chains. Conclusions were drawn for corporate environmental responsibility as well as for the role of supply chain management in extending environmental demand over several echelons and diverse industries.