宝钢环境信息化系统建设探索

系统介绍了宝钢环境信息化系统建设架构、功能、特点,以及对污染减排、环境自动监测及信息化技术进行有效融合后的应用实践,并对该信息化系统在提高环境监控能力,完善系统建设上提出扩展监控范围、提升功能等构想.     

基于重要抽样法的耐压球壳可靠性计算方法研究

目的 解决耐压球壳极小失效概率的可靠性计算问题。方法 在自适应Kriging的基础上,结合重要抽样法提出耐压球壳可靠性计算方法。该方法在较大失效概率下构建的Kriging模型基础上获得重要方向,在重要方向上计算得到较低失效概率下的设计点,以设计点为中心,构建小失效概率的Kriging模型,并通过此模型采用重要抽样法开展可靠性计算。结果 分别使用提出的重要抽样法和蒙特卡洛法计算了2个算例的失效概率,计算结果表明,该方法具有较高的精度和效率。使用该方法对某耐压球壳工作载荷下的失效概率进行了计算,计算得到该球壳失效概率为4.094×10^–96。结论 研究结果可为无失效方程下极低失效概率的可靠性计算问题提供参考。     

Comprehensive and high-resolution emission inventory of atmospheric pollutants for the northernmost cities agglomeration of Harbin-Changchun, China: Implications for local atmospheric environment management

Using a bottom-up estimation method, a comprehensive, high-resolution emission inventory of gaseous and particulate atmospheric pollutants for multiple anthropogenic sectors with typical local sources has been developed for the Harbin-Changchun city agglomeration (HCA). The annual emissions for CO, NOx, SO₂, NH₃, VOC_S, PM_2.5, PM₁₀, BC and OC during 2017 in the HCA were estimated to be 5.82 Tg, 0.70 Tg, 0.34 Tg, 0.75 Tg, 0.81Tg, 0.67 Tg, 1.59 Tg, 0.12 Tg and 0.26 Tg, respectively. For PM₁₀ and SO₂, the emissions from industry processes were the dominant contributors representing 54.7% and 49.5%, respectively, of the total emissions, while 95.3% and 44.5% of the total NH₃ and NOx emissions, respectively, were from or associated with agricultural activities and transportation. Spatiotemporal distributions showed that most emissions (except NH₃) occurred in November to March and were concentrated in the central cities of Changchun and Harbin and the surrounding cities. Open burning of straw made an important contribution to PM_2.5 in the central regions of the northeastern plain during autumn and spring, while domestic coal combustion for heating purposes was significant with respect to SO₂ and PM_2.5 emissions during autumn and winter. Furthermore, based on Principal Component Analysis and Multivariable Linear Regression model, air temperature, relative humidity, electricity and energy consumption, and the urban and rural population were optimized to be representative indicators for rapidly assessing the magnitude of regional atmospheric pollutants in the HCA. Such indicators and equations were demonstrated to be useful for local atmospheric environment management.     

生态市建设的战略环境影响评价初探——以淮南市为例

生态市建设是一项系统工程，是实现可持续发展的必然途径。通过对战略环境影响评价理论、方法的探讨，开发出了针对生态市建设的战略环境影响评价技术框架，并以淮南市为例，构建了一套完整的战略环境影响评价指标体系。最后分析了淮南生态市建设SEIA的主要内容：土地利用规划、产业政策结构调整以及各项战略的环境影响评价，为生态市建设SEIA提供方法和技术支持。     

Developing sustainable products and services

In light of increasing pressures to adopt a more sustainable approach to product design and manufacture, the requirement to develop sustainable products is one of the key challenges facing industry in the 21st century. Hence, the concept of developing sustainable products as well as services is evolving as a key element of Cleaner Production. Sustainable product development initiatives (mainly through eco-design) have been evolving for some time to support companies develop more sustainable products. Ireland has been running the highly successful Environmentally Superior Products (ESP) initiative that supports industrial companies to incorporate a more sustainable approach to the development of products and/or services. The lessons learned from the ESP and other global Sustainable Product and Service Developments in industry and research, are being used to develop a method for effective sustainable product and/or service development (SPSD) in industry. The method is designed to provide pragmatic guidance to business and industry for developing sustainable products and services as well as incorporating this approach within existing corporate strategy, cleaner production and product development systems. This method is being developed by the authors at the Environmental Policy and Management Group (EPMG), Department of Environmental Science and Technology, Imperial College London, UK in conjunction with industry and practitioners. The method provides a framework for implementing SPSD throughout the entire lifecycle of a product and/or service. It can be used to identify, assess and implement the options for optimum sustainability in the design and development of a product and/or service. This paper describes the key features of this method.     

环境影响评价中公众参与的机制与有效性

公众参与是环境影响评价中的重要内容。从公众参与的定义、目标和作用入手，就环境影响评价中公众参与的作用机制及其有效性进行探讨，认为：广泛的公众代表性、有效的公众参与形式以及公众意见的如实反映和客观分析，都是增进环境影响评价中公众参与的机制有效性的重要因素。     

对开发建设项目环境影响评价中公众参与内容的探讨

环境影响评价中公众参与的内容应与建设项目的生产性质、污染状况相适应。不同类型的开发建设项目开展的公众参与内容是不同的。对项目公众参与的组织形式及内容进行了探讨，便于指导建设项目的环境影响评价工作。     

建立我国战略环境评价理论与方法体系

战略环境评价是环境影响评价在战略层次上的应用，是具体落实可持续发展战略的重要工具。在分析其现实意义的基础上，提出我国战略环境评价理论与方法体系的主要研究内容，就建立我国战略环境评价理论与方法提出建议。     

Baseline levels of PCDD/Fs in soil and herbage samples collected in the vicinity of a new hazardous waste incinerator in Catalonia,Spain

The construction in Constantí (Catalonia, Spain) of a new hazardous waste incinerator (HWI), which is the first one in Spain, finished in 1999. In order to determine the temporal variation (1996–1998) in the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in the vicinity of the new HWI, 40 soil and 40 herbage samples were collected (1998) at the same sampling points in which samples had been taken two years before (1996). Each sample was analyzed for PCDDs and PCDFs by high resolution gas chromatography/high resolution mass spectrometry. In the 1996 survey, PCDD/F concentrations in soils ranged from 0.13 to 24.20 ng I-TEQ/kg (d.m.), with median and mean values of 0.67 and 1.68 ng I-TEQ/kg (d.m.), respectively. In the present study, PCDD/F concentrations ranged from 0.12 to 17.20 ng I-TEQ/kg (d.m.), with a median value of 0.75 ng I-TEQ/kg (d.m.) and a mean value of 1.59 ng I-TEQ/kg (d.m.). In turn, in the present study PCDD/F concentrations in vegetation ranged from 0.14 to 2.01 ng I-TEQ/kg (d.m.) (median and mean values: 0.23 and 0.31 ng I-TEQ/kg, respectively), while in the 1996 survey PCDD/F concentrations ranged from 0.24 to 1.22 ng I-TEQ/kg (d.m.) (median and mean values: 0.53 and 0.61 ng I-TEQ/kg, respectively). According to the present (1998) and the previous (1996) levels of PCDD/Fs found in soils and vegetation, the area under potential influence of the new facility shows a rather low contamination by these compounds. The current results should be useful to establish the environmental impact of the HWI.     

Assessment of popular techniques for co-processing municipal solid waste in Chinese cement kilns

• Municipal solid waste (MSW) was fermented, screened, gasified, then co-processed. • Co-processing MSW in cement kilns could cause excessive pollutant emissions. • Bypass flue gas can be disposed of through the main flue system. • Popular MSW co-processing methods do not affect cement quality. Cement kiln co-processing techniques have been developed in the past 20 years in China, and more than 60 factories now use fermentation, screening, and gasification pre-treatment techniques to co-process municipal solid waste (MSW). There three complete MSW pre-treatment techniques, co-processing procedures, and environmental risk assessments have been described in few publications. In this study, we assessed the effectiveness of each technique. The results suggested that the pollutant content released by each pre-treatment technology was lower than the emission standard. To reveal the mechanisms of pollutant migration and enrichment, the substances in the kiln and kiln products are investigated. The input of co-processing materials (Co-M) produced by fermentation caused formation of polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/Fs) in the bypass flue gas (By-gas) in excess of the regulatory standard. The Co-M input produced by the screening and gasifier technologies caused the total organic carbon (TOC) concentration to exceed the standard. In addition, the NO_x, TOC, and PCDD/Fs in the By-gas exceeded the regulatory standard. Raw meal was the primary chlorine and heavy metals input stream, and clinker (CK) and cement kiln dust (CKD) accounted for>90% of the total chlorine output stream. Flue gas and CKD were the primary volatile heavy metal (Hg) output streams. Greater than 70% of the semi-volatile heavy metals (Cd, Pb, Tl and Se) distributed in hot raw meal and bypass cement kiln dust. The low-volatility heavy metals were concentrated in the CK. These results indicated that co-processing techniques used in China still require improvement.