社会发展综合实验区生态建设及科技引导途径

本文提出了社会发展综合实验区建设的实质就是协调好人口、资源与环境间的生态关系，为了促进社会—经济—自然复合生态系统的持续发展，探讨了科技引导实验区生态建设的途径。     

钙质煤渣脱硫剂与烟气脱硫的试验研究

利用锬本身排出的煤渣作硫剂基体核粒，配入少量的石灰，并加水搅拌均匀，使石灰裹覆在煤潭颗粒表面，制成具有较大 的钙质煤渣脱硫剂，并用于烟气脱硫（干法）试验。结果表明：脱硫率最高达８５．５％￣９４．６％，脱硫率大于８０％的运行时间达２ｈ，脱硫费用约为０．３３元／ｋｇ（ＳＯ２）。     

Colony foundation and polygyny in the ant Formica podzolica

We document the variation in number of queens occurring naturally in founding, immature and mature nests of the ant Formica podzolica, and compare development of colonies and survivorship of queens in experimental nests started with 1–16 foundresses. Number of queens per nest was associated with stage of colony development. Most nests were monogynous, but 20% of immature nests (n = 66) and 25% of mature nests (n = 92) were oligogynous or polygynous. Colonies were usually established by single queens (i.e., haplometrosis), but colony establishment by multiple queens (i.e., pleometrotis) was also common, occurring in 27% of founding nests (n = 492). Foundress groups in the field were small ( = 1.47 ± 0.04 queens/nest), and large groups experienced high mortality and low productivity in artificial nests. Therefore, the many queens (up to 140) in some immature and mature colonies were probably secondarily pleometrotic. Experimental nests started with 1–4 queens were more successful than those initiated by 8 or 16 queens. Small groups (2–4 queens) produced more pupae before the first nests reared workers than single foundresses or larger groups (8 or 16 queens). Although single foundresses were less productive than queens in small groups, they experienced greater survivorship and less weight loss than queens in pleometrotic associations. Besides low productivity, queen mortality and weight loss were greatest in large groups.     

Experimental evidence for helping and hindering by previous offspring in the cooperative-breeding Seychelles warbler Acrocephalus sechellensis

Prebreeding Seychelles warblers (Acrocephalus sechellensis) frequently act as helpers on their natal territory, aiding in territory defence, predator mobbing, nestbuilding, incubation (only females) and feeding dependent young of their parents. In some cases helpers could attain breeding status (e.g. by joint-nesting) in their natal group and become co-breeders. Comparisons of group size and reproductive success on a given quality territory suggest that the presence of alloparents (helpers and cobreeders) significantly affects the reproductive success of their parents. The influence of alloparents on reproductive success was examined by removing alloparents from breeding units and comparing the success of natural-sized and artificially reduced groups. Removal experiments, controlled for territory quality, group size and breeder age, showed that the presence of one alloparent significantly improved the reproductive success of its parents. Analysis strongly suggests that this was entirely due to helping behaviour (i.e. providing care to offspring of their parents), thereby improving the helper's inclusive fitness benefits from staying at home. However, these experiments showed also that the presence of two or more alloparents in medium-quality territories significantly decreased reproductive success, compared with groups with one alloparent. Several lines of evidence suggest that this may have been due to the joint-nesting and reproductive competition that could occur in breeding groups, or simply to resource depression when a large number of previous offspring remained on their natal territory.     

活性污泥法简化数学模型的研究与进展

介绍几种简化数学模型 (如ROM、SPM、SLM等 )的结构与特点。模型的验证结果表明 ,简化模型能够较好的模拟系统的运行 ,产生较为准确的模拟结果     

Comparison of Evapotranspiration Simulation Performance by APEX Model in Dryland and Irrigated Cropping Systems

Accurate estimation of evapotranspiration (ET) is essential to improve water use efficiency of crop production systems managed under different water regimes. The Agricultural Policy/Environmental eXtender (APEX) model was used to simulate ET using four potential ET (ET_p) methods. The objectives were to determine sensitive ET parameters in dryland and irrigated cropping systems and compare ET simulation in the two systems using multiple performance criteria. Measured ET and crop yield data from lysimeter fields located in the United States Department of Agriculture‐Agricultural Research Service Bushland, Texas were used for evaluation. The number of sensitive parameters was higher for dryland (11–14) than irrigated cropping systems (6–8). Only four input parameters: soil evaporation plant cover factor, root growth soil strength, maximum rain intercept, and rain intercept coefficient were sensitive in both cropping systems. Overall, it is possible to find a set of robust parameter values to simulate ET accurately in APEX in both cropping systems using any ET_p method. However, more computation time is required for dryland than irrigated cropping system due to a relatively larger number of sensitive input parameters. When all inputs are available, the Penman–Monteith method takes the shortest computation time to obtain one model run with robust parameter values in both cropping systems. However, in areas with limited datasets, one can still obtain reasonable ET simulations using either Priestley–Taylor or Hargreaves. Editor's note : This paper is part of the featured series on Optimizing Ogallala Aquifer Water Use to Sustain Food Systems. See the February 2019 issue for the introduction and background to the series.     

高温环境下薄壁结构声疲劳失效验证技术研究

目的针对高温环境下薄壁结构声疲劳失效问题,研究分析薄壁结构在高温环境下的声疲劳失效特征,验证薄壁结构热声响应计算方法与疲劳寿命预估模型的有效性。方法较系统地阐述高温环境下薄壁结构声疲劳失效试验验证技术,重点总结热声疲劳试验环境建立与加载、高温环境下噪声测试、高温环境下动态响应测试和疲劳破坏寿命测试方法,并通过具体案例说明工程中试验验证方法的有效性。结果试验件在仿真计算与试验中的破坏位置一致,响应频率吻合较好,应力水平一致,疲劳寿命量级相当。结论薄壁结构热声响应计算方法与疲劳寿命预估模型的有效性高。     

Numerical simulation of evaporation of volatile liquids

The paper presents the results of the validation of the developed pool evaporation model using literature and our own experimental data. The proposed model was used to examine the effect of wind velocity and pool sizes on the evaporation rate of volatile liquid (hexane). Contrary to the semi-empirical evaporation model widely used in hazard assessment, stronger dependence of evaporation rate on pool size at low wind speeds is obtained.     

Determination of optimum operating conditions for industrial dye wastewater treatment using adaptive heuristic criticism pH control

For a pilot-scale application, pH control in the treatment of highly contaminated dye industrial wastewater containing metallic compounds as the main pollutants has been investigated with a method using adaptive heuristic criticism control (AHCC). Subsequent experimentation on between 12 and 18 l of the wastewater was carried out using statistical experimental design methodology to evaluate the effects of three critical factors: slaked lime (calcium hydroxide, Ca(OH)(2)) concentration, iron chloride (FeCl(3)) concentration and wastewater volume. With these critical factors, the wastewater treatment process is modeled as an appropriate quadratic cost function of the turbidity of the clarified water. The model is optimized with Rosenbrock's method. Response surface topology of the wastewater treatment is given in terms of optimal concentrations of lime water and FeCl(3) and optimal wastewater volume at pH 11.     

Validation of Urban Emission Inventories

Two emission validation methods are presented. The first method focuses on the precision of the emission factors and the accuracy of modelled traffic flows. Emission factors derived from the COPERT II methodology are compared with on-board emission measurements and modelled traffic flow rates are compared with observations. The second validation method focuses on the completeness of the inventory, i.e. coverage of all sources. The method compares measured pollutant fluxes in the urban plume with the downwind transported and dispersed emissions integrated over plume width and mixing height. Both methods seem to indicate that traffic emission factors used in the urban emission inventories show large uncertainties. Besides the lack of measurement precision this is mainly induced by external influence factors like driving behaviour and vehicle maintenance.