Environmental Justice,Local Knowledge,and Risk: The Discourse of a Community-Based Cumulative Exposure Assessment

While risk assessment continues to drive most environmental management decision-making, its methods and assumptions have been criticized for, among other things, perpetuating environmental injustice. The justice challenges to risk assessment claim that the process ignores the unique and multiple hazards facing low-income and people of color communities and simultaneously excludes the local, non-expert knowledge which could help capture these unique hazards from the assessment discourse. This paper highlights some of these challenges to conventional risk assessment and suggests that traditional models of risk characterization will continue to ignore the environmental justice challenges until cumulative hazards and local knowledge are meaningfully brought into the assessment process. We ask whether a shift from risk to exposure assessment might enable environmental managers to respond to the environmental justice critiques. We review the US EPA's first community-based Cumulative Exposure Project, piloted in Brooklyn, NY, and highlight to what extent this process addressed the risk assessment critiques raised by environmental justice advocates. We suggest that a shift from risk to exposure assessment can provide an opportunity for local knowledge to both improve the technical assessment and its democratic nature and may ultimately allow environmental managers to better address environmental justice concerns in decision-making.     

Does seeing it make a difference? The self-reported deterrent impact of random breath testing

Introduction: Random Breath Testing (RBT) remains a primary method to both deter and apprehend drink drivers, yet a large proportion of road fatalities continue to be caused by the offense. Outstanding questions remain regarding how much exposure to RBT operations is needed to influence deterrence-based perceptions and subsequent offending. Method: Given this, licensed motorists (N = 961) in Queensland were recruited to complete a questionnaire either in the community (N = 741) or on the side of the road after just being breath tested (N = 243). Survey items measured different types of exposure to RBT operations (e.g., “seen” vs. “being tested”) and subsequent perceptions of apprehension as well as self-reported drink driving behaviors. Results: The key findings that emerged were: motorists were regularly exposed to RBT operations (both viewing and being tested), such exposure was not significantly correlated with perceptions of apprehension certainty, and a sizable proportion reported engaging in drink driving behaviors (e.g., approx. 25%), although roadside participants naturally reported a lower percentage of offending behaviors. Importantly, it was revealed that current “observations” of RBT was sufficient, but not actual levels of active testing (which needed to be doubled). Nevertheless, higher levels of exposure to RBT operations was found to be predictive of a lack of intention to drink and drive again in the future. Conclusions: This paper suggests that mere exposure to enforcement may not create the intended rule compliance, and that the frequency of exposure is also essential for the roadside.     

Assessing inhalatory and dermal exposures and their resultant health-risks for workers exposed to polycyclic aromatic hydrocarbons (PAHs) contained in oil mists in a fastener manufacturing industry

This study first assessed workers' inhalatory and dermal exposures to polycyclic aromatic hydrocarbons (PAHs) contained in oil mists. Then, their resultant lung cancer and skin cancer risks were estimated. Finally, control strategies were initiated from the health-risk management aspect. All threading workers in a fastener manufacturing plant were included. 16 inhalatory and 88 dermal PAH exposure samples were collected. Results show that the inhalatory gas phase total PAH exposure level (8.60x10(4) ng/m(3)) was much higher than that of particle phase (2.30x10(3) ng/m(3)). Workers' mean inhalatory exposure level (8.83x10(4) ng/m(3)) was lower, but its corresponding 1-sided upper 95% confidence level (UCL(1,95%)=1.02x10(5) ng/m(3)) was higher than the time-weighted average permissible exposure level (PEL-TWA) regulated in Taiwan for PAHs (1.00x10(5) ng/m(3)). The mean whole body total PAHs dermal exposure levels was 5.44x10(6) ng/day and the top five exposed surface areas were lower arm, hand, upper arm, neck, and head/front. The estimated lifetime skin cancer risk (9.72x10(-3)) was lower than that of lung cancer risk (1.64x10(-2)), but both were higher than the significant risk level (10(-3)) defined by the US Supreme Court in 1980. The installation of a local exhaust ventilation system at the threading machine should be considered as the first priority measurement because both lung and skin cancer risks can be reduced simultaneously. If the personal protection equipment would be adopted in the future, both respiratory protection equipment and protective clothing should be used simultaneously.     

我国煤炭起尘特性

阐述了我国煤炭生产、加工、储运现状和发展趋势。对煤炭本身的起尘特性,包括全水分含量、内水分含量和外水分含量,煤炭的煤化程度与润湿性关系以及煤块和煤粉的饱和水分含量特性,分别进行了详细深入的试验研究。在此基础上,提出了主要问题及控制煤尘污染的对策     

Ozone distribution in central Italy and its effect on crop productivity

The focus of the present study was to assess the ozone levels in a typical area of the Mediterranean basin, viz. Tuscany (central Italy). Eighty-thousand hourly mean ozone concentrations were recorded by 10 automatic analysers in the districts of Florence, Pisa, Lucca and Prato, from May to September 1995 to 1997. The highest daily mean concentrations were reached in Florence, with a maximum hourly average of 197 ppb. In Lucca and Pisa, the peaks were close to 100 ppb. Data from Prato were much lower. Long-term critical levels for vegetation, as set by United Nations Economic Commission for Europe (UNECE), were constantly exceeded in Florence and Pisa, occasionally in Lucca, never in Prato. The results were used to fit exposure/yield response relationships proposed by UNECE and US National Crop Loss Assessment Network for some important crops. The estimated yield losses varied in Florence from 8% for corn and alfalfa to 27% for soybean, in Pisa from 5% for corn to 24% for soybean, in Lucca from 3% for corn to 17% for soybean. A preliminary economic estimate for corn, wheat, barley, soybean, tomato and alfalfa, calculated annual damage to be 4.6 M Euro in Florence, 0.5 M Euro in Lucca and 3 M Euro in Pisa. The picture must be regarded as only partial, as exposure/yield response relationships for important Italian crops (such as grapevine and vegetables) are not available.     

Toxics Use Reduction in the Home: Lessons Learned from Household Exposure Studies

Workers and fence-line communities have been the first to benefit from the substantial reductions in toxic chemical use and byproducts in industrial production resulting from the Massachusetts Toxics Use Reduction Act (TURA). As TURA motivates reformulation of products as well as retooling of production processes, benefits could extend more broadly to large-scale reductions in everyday exposures for the general population. Household exposure studies, including those conducted by Silent Spring Institute, show that people are exposed to complex mixtures of indoor toxics from building materials and a myriad of consumer products. Pollutants in homes are likely to have multiple health effects because many are classified as endocrine disrupting compounds (EDCs), with the ability to interfere with the body’s hormone system. Product-related EDCs measured in homes include phthalates, halogenated flame retardants, and alkylphenols. Silent Spring Institute’s chemical analysis of personal care and cleaning products confirms many are potential sources of EDCs, highlighting the need for a more comprehensive toxics use reduction (TUR) approach to reduce those exposures. Toxics use reduction targeted at EDCs in consumer products has the potential to substantially reduce occupational and residential exposures. The lessons that have emerged from household exposure research can inform improved chemicals management policies at the state and national levels, leading to safer products and widespread health and environmental benefits.     

非金属材料的氙灯曝露试验概述

氙灯曝露试验是非金属材料的耐候性和耐光性测试的主要方法之一,本文着重介绍了氙灯曝露试验的原理、试验条件在当前的氙灯曝露试验设备上的物理实现、主要的氙灯试验标准以及氙灯曝露试验应考虑的因素.     

汽车行业的氙灯曝露试验综述及技术发展趋势

本文着重对汽车行业主要的氙灯曝露试验标准的技术特点进行了综述,并分析了该行业氙灯曝露试验的技术发展趋势.     

Outdoor and indoor cadmium distributions near an abandoned smelting works and their relations to human exposure

The relationship of measured or modelled Cd concentrations in soil, house dust and available to plants with human urinary Cd concentrations were assessed in a population living around a Cd/Pb/Zn smelter in the UK. Modelled air concentrations explained 35% of soil Cd variation indicating the smelter contributed to soil Cd loads. Multi-variate analysis confirmed a significant role of biological and life-style factors in determining urinary Cd levels. Significant correlations of urinary Cd with soil, house dust and modelled plant available Cd concentrations were not, however, found. Potential reasons for the absence of clear relationships include limited environmental contact in urban populations; the role of undefined factors in determining exposure; and the limited spatial scope of the survey which did not sample from the full pollution gradient. Further, the absence of any significant relationship indicates that environmental measures provide limited advantage over atmospheric model outputs for first stage human exposure assessment.     

Heat map visualization of complex environmental and biomarker measurements

Over the past decade, the assessment of human systems interactions with the environment has permeated all phases of environmental and public health research. We are invoking lessons learned from the broad discipline of Systems Biology research that focuses primarily on molecular and cellular networks and adapting these concepts to Systems Exposure Science which focuses on interpreting the linkage from environmental measurements and biomonitoring to the expression of biological parameters. A primary tool of systems biology is the visualization of complex genomic and proteomic data using “heat maps” which are rectangular color coded arrays indicating the intensity (or amount) of the dependent variable. Heat maps are flexible in that both the x-axis and y-axis can be arranged to explore a particular hypothesis and allow a fast overview of data with a third quantitative dimension captured as different colors. We are now adapting these tools for interpreting cumulative and aggregate environmental exposure measurements as well as the results from human biomonitoring of biological media including blood, breath and urine. This article uses existing EPA measurements of environmental and biomarker concentrations of polycyclic aromatic hydrocarbons (PAHs) to demonstrate the value of the heat map approach for hypothesis development and to link back to stochastic and mixed effects models that were originally used to assess study results.