珠江三角洲区域污染分布及其垂直风场特征

基于2014年4月~2015年3月珠江三角洲(珠三角)56个环境监测子站以及9个城市的逐时PM2.5浓度数据,对珠三角地区的颗粒物污染进行了系统聚类分析和相关性分析.结果表明,珠三角地区PM2.5的区域污染可分为3种类区,一为东莞、广州、佛山以及江门(Ⅰ型);二为中山、珠海、深圳、惠州(Ⅱ型);三为肇庆单独为一类(Ⅲ型).其在一年中所出现的天数分别为47、7和128 d.Ⅰ型污染时,除珠海、深圳和惠州外,其他城市的PM2.5浓度普遍较高;Ⅱ型污染时,整个珠三角地区的PM2.5浓度均要高于50.0μg·m-3;Ⅲ型污染时,PM2.5浓度较高的区域主要集中在肇庆、广州以及佛山地区.同时利用珠三角地区4台主要的风廓线雷达数据研究3种污染类型所对应的垂直风场特征发现:Ⅰ型与Ⅲ型污染状况所对应的风廓线相似,低层受东南风控制,高层为西南风,Ⅲ型的风速大于Ⅰ型风速,而Ⅱ型污染时的风速明显大于其他两种类型,其低层几乎均受偏北风影响,而高层则受偏西风的影响.Ⅱ型污染所对应的边界层中低层的风向变化很小,而其他两类则有一定的变化.同时Ⅱ型的通风量要明显大于其他两种类型,其中Ⅰ型的通风量最小.珠三角受偏北风作用时,整个珠三角的PM2.5浓度较高;当盛行东南风时,Ⅰ、Ⅱ区的PM2.5浓度相对较低,而Ⅲ区的污染相对较重.     

可靠性鉴定试验受试样品的软硬件联合测试技术

为了研究一种可靠性鉴定试验中受试样品的软硬件联合测试方法,首先总结了软硬件联合测试的目的、对象、实施时机及传统测试需要的改进之处和可借鉴之处,进一步研究了软硬件联合测试与传统可靠性试验的关系。然后在考查软件与硬件测试结合的基础上,提出了两层结构立体测试运行剖面的方法,即利用子剖面与环境剖面的对应关系建立软件测试与硬件测试的联系,将两种测试统一在同一时间轴上,得出了软硬件联合测试的一般流程。     

军用飞机机载设备环境实测技术研究

为解决装备可靠性试验、环境试验、新产品设计以及修订相应环境标准中缺乏装备环境应力实测数据的问题,通过技术论证和探索研究,开展了系列军用飞机机载设番环境的飞行实测工作,取得了实测机种典型任务剖面中的机载设备环境状态,掌握了有关设番舱的综合环境应力情况,从而为进一步编制飞机机载设备综合环境应力试验剖面提供了真实有效的实测数据依据。积累了飞机机载设备环境实测的经验,为我国军用飞机机载设备环境应力数据库的建设奠定了基础。     

Simultaneous effect of shift work on blood pressure and lipid profile: a path analysis

The aim of this study was to assess the direct and indirect effects of shift work (SW) on the systolic blood pressure (SBP) and lipid profile of male workers. For this purpose, a cross-sectional study was conducted involving 6539 male workers of Esfahan Mobarakeh Steel Company. From all of the participants, 3065 (46.8%) were day workers and the remainder were shift workers. The results of path analysis revealed that the most effective variables on SBP were body mass index, fasting blood sugar, triglycerides and SW with a total effect of 0.241, 0.095, 0.064 and 0.056, respectively.     

典型工业园污染源羰基化合物排放特征研究

选取中国华东地区某工业园新区典型行业企业进行现场采样,利用PFPH衍生化-GC/MS联用技术进行羰基化合物(CBCs)的组成特征和含量水平检测,研究其排放特征。结果表明,在该工业园新区内共检出22种CBCs,各化合物的质量浓度为0.008~239.4μg/m~3,各企业CBCs总质量浓度均值为(437.62±64.45)μg/m~3,工业污染源排放贡献率由高至低顺序依次为涂料制造橡胶制造医药制造化学品制造金属制造电子元件制造。根据各物质化学反应活性及大气化学寿命,获得该工业园新区典型的CBCs分子标志物为甲醛、乙醛、丙酮、丙醛、2-丁酮、丁醛、己醛、环己酮和苯甲醛,它们占总CBCs含量的80.01%,其中乙醛含量最高,质量浓度均值高达(95.42±71.48)μg/m3。最后,建立了6种典型工业污染源CBCs成分谱。     

颗粒物激光雷达在大气复合污染立体监测中的应用

针对由于局地污染、沙尘输入、外源性输入与局地污染物相互叠加所导致的3种灰霾污染发生过程,分别选取3个典型案例,采用颗粒物激光雷达对污染物的时空分布特征进行解析。研究发现,在局地污染发生时,污染物从地面开始垂直向上扩散,扩散高度约1 km。重度污染过程中,气溶胶的日均垂直消光系数随高度的变化背离指数衰减特征,800 m高度处出现消光系数的极大值层,极大值超过2.5 km-1,800 m以下消光系数近乎常数,约为0.3 km-1。这说明,重污染过程中,有一层较厚重的颗粒物分布,使近地面污染物在垂直方向的扩散能力减弱,形成积累效应,造成大面积空气混浊。当有外源性沙尘输入时,激光雷达能够清晰地监测到污染团输入的全过程。沙团突然出现在高空2~3 km。污染团退偏振度较大,超过0.3。随着沙尘粒子的重力沉降,沙团的轮廓在垂直方向上不断地增大。沙团的输入,导致近地面粗颗粒质量浓度的增加幅度明显大于细颗粒。在第3个案例中,激光雷达清晰地监测到高空1.8~3 km突然出现含有大量球形细颗粒的污染团,同时还发现此污染团与近地面的污染物有不同的演化特征。近地面污染物随时间垂直向上扩散,12:00左右扩散高度超过1.8 km。而高空的污染团逐渐沉降进入边界层内,与近地面扩散的污染物相互混合,共同导致本地的灰霾天气。综上所述,激光雷达可以清晰地捕获污染物的垂直结构特征,对不同的致霾过程进行立体解析,实现对大气复合污染的监测和机理研判。     

Influence of ciprofloxacin on the microbial catabolic diversity in soil

In this study, the effect of ciprofloxacin (CIP) on the catabolic diversity of soil microbial communities was evaluated. Soil samples were spiked with ciprofloxacin (0, 1, 5 and 50 mg?kg^?1) and were incubated for 1, 3, 9, 22 and 40 days. Untreated controls received only water. The functional diversity of the microbial community studied was characterized using a catabolic response profile (CRP). Six substrate groups were tested: carbohydrates, amino acids, carboxylic acids, aromatic chemicals, alcohols and polymers. After 40 days, the CIP concentrations in the soil samples ranged from 25% to 58% of the initial concentrations. Soil respiratory responses to the individual substrates D-glucose, lactose, D-mannose, L-glutamic, Na-citrate, malic acid and inosine were inhibited at the high CIP concentrations (5 and 50 mg·kg^?1) in the soils and were increased at the lowest CIP concentration (1 mg·kg^?1). Soil respiration was inhibited at all of the CIP concentrations after the addition of D-galactose and glycerol. The CIP concentration and incubation time explained 45.3% of the variance of the catabolic responses. The CRP analysis clearly discriminated among the different CIP concentrations. The results suggest that CIP strongly affects the catabolic diversities of soil microbial communities and that its effect is more significant than that of incubation time.     

Carbofuran degradation in soil profiles

Abstract

Two soils, Puyallup fine sandy loam from Puyallup, WA, and Ellzey fine sand from Hastings, FL, each with a prior history of carbofiiran exposure but with different pedological and climatological characteristics, were found to exhibit enhanced degradation toward carbofiiran in surface and subsurface soil layers. The treated Puyallup and Ellzey soils exhibited higher mineralization rates for both the carbonyl and the aromatic ring of carbofiiran when compared to untreated soils. Disappearance rates of [¹⁴C‐URL (uniformly ring labeled)] carbofiiran in the treated Ellzey soil was faster than in untreated soil, and also faster in surface soil than in subsurface soil. Initial degradation patterns in the treated Ellzey soil were also different from those in the untreated soil. The treated Ellzey soil degraded carbofuran mainly through biological hydrolysis, while untreated soil degraded carbofuran through both oxidative and hydrolytic processes.     

Options for Change in the Australian Energy Profile

Climate change is occurring largely as a result of increasing CO₂ emissions whose reduction requires greater efficiency in energy production and use and diversification of energy sources away from fossil fuels. These issues were central to the United Nation climate change discussions in Durban in December 2011 where it was agreed that a legally binding agreement to decrease greenhouse gas emissions should be reached by 2015. In the interim, nations were left with the agreement reached at the analogous 2009 Copenhagen and 2010 Cancun meetings that atmospheric CO₂ levels should be constrained to limit the global temperature rise to 2 °C. However, the route to this objective was largely left to individual nations to decide. It is within this context that options for reduction in the 95 % fossil fuel dependency and high CO₂ emissivity of the Australian energy profile using current technologies are considered. It is shown that electricity generation in particular presents significant options for changing to a less fossil fuel dependent and CO₂ emissive energy profile.     

超高斯（分布）随机振动HALT试验剖面建立要点解析

本文介绍了超高斯（分布）随机振动HALT技术,对超高斯（分布）随机振动HALT试验剖面的建立提出了方法和建议,主要包括试验顺序的选择、应力强度的确定、步进量级的选择、驻留时间确定和试验停止原则等五方面,并总结了现场试验的要求和注意事项。