Radiation Effects on Blends of Poly(ε-Caprolactone) and Diatomites

Poly(-caprolactone) (PCL) was blended with diatomaceous earth (diatomite) and irradiated with -rays to introduce cross-linking between PCL molecules or both components. The unwashed diatomite containing a little of a volatile component showed high efficiency of introduction of cross-linking, whereas that with no volatile component showed low efficiency of introduction of cross-linking. Elongational viscosity, melt viscosity, and modulus of PCL/diatomite blend irradiated at various doses were significantly improved. Enzymatic degradation of the PCL/diatomite blend became faster than that of the PCL, though that of the blend irradiated became slower.     

Effects of Poly(Ethylene Glycol) on the Production of Poly(β-Hydroxybutyrate) by Azotobacter vinelandii UWD

Azotobacter vinelandii UWD, ATCC 53799, an engineered strain derived from Azotobacter vinelandii UW was used in the poly(ethylene glycol) (PEG)-modulated synthesis of poly(-hydroxybutyrate) (PHB). To the best of our knowledge, this is the first report on modulating the production of PHB by amending the fermentation broth with PEG using A. vinelandii UWD. It was determined that A. vinelandii UWD is prone to back-mutation to the parent strain; hence fermentation experiments require the use of the antibiotic rifampicin. Diethylene glycol (DEG) and PEGs with molecular weights of 400, 2000, and 3400 Da and pentaerythritol ethoxylate (PEE) were used in the modulated fermentation experiments in a concentration of 2% (w/v). The molecular weight of the resulting polymers was reduced by up to 78%. No impact on the productivity of the strain was observed. Spectroscopic evidence showed that PEG-modulated synthesis resulted in the covalent attachment of the ethylene glycol moiety only when a small molecule, DEG, was used. PEGs had the same effects on the polymer formation in terms of molecular weight reduction as DEG, but no spectroscopic evidence was found for the formation of a covalent linkage between PHB and higher molecular weight PEGs.     

On Methods for Analyzing Ecotones of Forest Margins

A simple method for the quantitative gradient analysis of a xerotermic forest-margin ecotone is described. In this method, the mean value of the coefficient of similarity between all plots of the transect is used for estimating the rate of changes in species composition. Changes in the phytosociological spectrum are analyzed. The method adequately reflects trends in the displacement of forest species by forest-margin, steppe, and meadow species.     

Morphophysiological Rearrangements in Fish in Response to Pollution (in the Light of S.S. Shvarts' Theory)

The results of a study on morphophysiological variation in fish inhabiting a subarctic lake exposed to chronic industrial pollution are described using an example of cisco, Coregonus lavaretus. It is shown that indices of the heart, liver, kidneys, gills, and fatness in these fish are increased significantly and have retained increased values for the past 20 years. The observed changes are analyzed on the basis of biochemical data. The results of studies on the dynamics of hematological parameters in fish are used for characterizing the development of toxicosis. Adaptive rearrangements associated with an increase in the metabolic rate and the activation of protective systems in the fish are explained in the context of S.S. Schvarts' concept. The idea is proposed that the additional energy cost of detoxification may be responsible for morphophysiological variation in fish under conditions of water pollution.     

用烧结法从沸腾炉渣中提取铝和铁的研究

把沸腾炉渣和石灰及精煤混合制成小球,然后在大约1 000 ℃下烧结.取不同烧结时间的样品用硫酸浸取,得到含有铝离子和铁离子的溶液.试验表明,采用浓度为4 mol/l的硫酸,在80 ℃下浸取烧结球样品(50%沸腾炉渣∶40%精煤∶10%石灰)24 h,可以得到铝和铁的最大提取率,分别为86.50%和94.60%.滤渣可以作为固化材料用于高速公路的路基建设或水泥生产中的添加剂.     

反应气氛对绿色合成纳米铁的组分及其活性的影响

成本低廉和无二次污染的"绿色"合成纳米材料是发展原位纳米环境修复技术的前沿研究课题之一.本文以绿茶提取液为还原剂和稳定剂进行"绿色"合成纳米铁,探讨在不同的气氛下"绿色"合成的纳米铁颗粒的主要成分,以期为调控合成纳米铁系材料提供基础研究.首先,利用扫描电子显微镜(SEM)、X射线能谱(EDS)、X射线光电子能谱分析(XPS)和傅里叶变换红外光谱(FTIR)等表征手段对不同反应气氛下合成的纳米铁颗粒的表面微观形貌、尺寸和价态结构进行分析.结果发现,在通入N2情况下,合成的纳米铁颗粒粒径为(84.7±11.5)nm,其主要成分以纳米零价铁为主;在通入空气情况下,合成的纳米铁粒径为(117.8±26.2)nm,其主要成分是纳米零价铁、氧化铁和四氧化三铁的混合物;通入O2时,合成的纳米铁粒径为(141.2±26.3)nm,其主要成分以四氧化三铁为主.其次,评价在不同气氛条件下合成纳米铁颗粒对去除亚甲基蓝(MB)的反应活性.结果表明,在反应温度313 K下降解初始浓度为50 mg·L-1的MB溶液,反应5 min时已达到平衡,通入N2合成的纳米铁降解MB,去除率高达98.7%,而通入O2合成的纳米铁反应效率低,对MB的去除率仅为65.3%.最后,从以上发现提出不同气氛下可以调控"绿色"合成的铁系纳米材料成分,从而导致不同的纳米修复环境中污染物的能力.     

Effect of AlCl3 concentration on nanoparticle removal by coagulation

In recent years, engineered nanoparticles, as a new group of contaminants emerging in natural water, have been given more attention. In order to understand the behavior of nanoparticles in the conventional water treatment process, three kinds of nanoparticle suspensions, namely multi-walled carbon nanotube-humic acid (MWCNT-HA), multi-walled carbon nanotube-N,N-dimethylformamide (MWCNT-DMF) and nanoTiO₂-humic acid (TiO₂-HA) were employed to investigate their coagulation removal efficiencies with varying aluminum chloride (AlCl₃) concentrations. Results showed that nanoparticle removal rate curves had a reverse “U” shape with increasing concentration of aluminum ion (Al^3 +). More than 90% of nanoparticles could be effectively removed by an appropriate Al^3 + concentration. At higher Al^3 + concentration, nanoparticles would be restabilized. The hydrodynamic particle size of nanoparticles was found to be the crucial factor influencing the effective concentration range (ECR) of Al^3 + for nanoparticle removal. The ECR of Al^3 + followed the order MWCNT-DMF > MWCNT-HA > TiO₂-HA, which is the reverse of the nanoparticle size trend. At a given concentration, smaller nanoparticles carry more surface charges, and thus consume more coagulants for neutralization. Therefore, over-saturation occurred at relatively higher Al^3 + concentration and a wider ECR was obtained. The ECR became broader with increasing pH because of the smaller hydrodynamic particle size of nanoparticles at higher pH values. A high ionic strength of NaCl can also widen the ECR due to its strong potential to compress the electric double layer. It was concluded that it is important to adjust the dose of Al^3 + in the ECR for nanoparticle removal in water treatment.     

Fe3O4活化过硫酸盐体系同步去除诺氟沙星和铅

采用Fe₃O₄活化过硫酸盐（PS）同步去除水中的NOR （诺氟沙星）和Pb （II）.探讨了Fe₃O₄投加量、PS浓度、初始pH值和Pb （II）浓度对NOR降解的影响.结果表明,NOR的降解符合伪一级反应动力学,在温度为30℃、NOR初始浓度为5.0mg/L、Pb （II）浓度为1.0mg/L、Fe₃O₄投加量为2.0g/L、PS浓度为1.5mmol/L、初始pH值为7.0的条件下,反应120min后,NOR降解率达90.2%,Pb （II）去除率为99.5%.自由基淬灭实验证实,硫酸根自由基（SO₄^-·）是NOR降解的主要自由基.通过LC-MS分析结果推测了NOR可能的降解路径和中间产物.Fe₃O₄活化PS高级氧化工艺可作为一种同步去除有机污染物和重金属的工艺.     

活性焦负载MnO2对气态Hg0的吸附脱除研究

研究了活性焦(AC)及负载MnO2的活性焦(MnO2/AC)对气态Hg0的吸附脱除,发现负载MnO2到AC明显提高了其对Hg0的吸附脱除能力.考察了MnO2负载量、温度、Hg0浓度和烟气成分等对MnO2/AC吸附脱除Hg0的影响.结果表明,MnO2/AC对Hg0的吸附脱除能力随MnO2负载量的增加而增强;在120～200℃的温度范围内,随着温度升高,MnO2/AC对Hg0的吸附脱除能力增强;O2和HCl对MnO2/AC吸附脱除Hg0具有促进作用,而SO2和H2O具有抑制作用.SEM-EDX和逐级化学提取结果证实,MnO2将Hg0催化氧化为HgO并吸附在AC上,这是MnO2/AC具有较高的吸附脱除Hg0能力的原因.     

五羰基铁对正辛硫醇中硫的脱除研究

由于能源化石类燃料中均包含不同含量的硫化物,随着人类对这些能源的不断利用,引发的环境污染等问题日趋严重。利用五羰基铁(Fe(CO)5)分解条件温和可控,产物无杂质,分解后的Fe0可以与硫原子原位键合等特点。文章尝试采用Fe(CO)5作为脱硫剂在温和条件下进行脱除正辛硫醇的研究。实验结果表明:随着压强(101~5 067 kPa)、Fe(CO)5加入量(50~250μL)、时间(1~6 h)和温度(0~180℃)的不同,Fe(CO)5脱硫效率具有明显差异,在此基础上得到最佳脱硫条件及最高脱除效率:常压、Fe(CO)5加入量200μL(1.4 mmol)、t=2h和T=140℃时,达到最高硫容3 450 mg/L。分别采用IR、XPS手段对脱硫反应机理进行了探索。IR结果表明:在1 084 cm-1处为硫氧峰,在797 cm-1归属为铁氧峰。XPS结果表明:167.8 eV处可能为S4+,711.6 eV处可能为Fe3+。因此,正辛硫醇脱除的可能机理为巯基断裂,并在空气中与氧结合,最终形成S4+,而Fe(CO)5的Fe经过脱硫之后,在空气中不稳定,最终被氧化成Fe3+。