镉胁迫下蚯蚓金属硫蛋白氧化修饰的研究(Oxidative Modification of Metallothionein in Earthworm under Cd Stress)

金属硫蛋白(MT)是生物体内的一类富含巯基(—SH)的蛋白,在细胞氧化还原调控和重金属解毒等方面具有重要作用.MT的—SH可以络合重金属,同时对氧化作用很敏感,重金属胁迫产生的活性氧物质(ROS)可以将其氧化成二硫键(S—S).为揭示镉(Cd)对蚯蚓MT的—SH含量及其氧化修饰的影响,将蚯蚓放入Cd浓度为0、100、300mg·kg-1的黄棕壤中胁迫21天,通过SBD-F标记和高效液相色谱(HPLC)结合的方法测定MT中—SH和S—S的含量.结果显示,随着Cd浓度的增加,蚯蚓体内的—SH和S—S含量均逐渐增加,但S—S所占比例降低.这说明Cd诱导了蚯蚓体内MT合成,并且诱导量随着Cd胁迫的增强而增加,但—SH的氧化修饰程度有所下降.     

改性柚子皮吸附剂对模拟废水中Pb^2＋的吸附性能

以废柚子皮为原料,经ZnCl2浸泡一加热的化学改性手段制备改性柚子皮生物吸附剂,并通过模拟试验研究该吸附剂对废水中Pb^2＋的去除。考察了模拟废水的pH、吸附时间、吸附剂用量和Pb^2＋初始浓度、温度等因素对柚子皮吸附剂去除Pb^2＋的影响,并研究柚子皮吸附剂对Pb^2＋的吸附动力学及吸附特征。结果表明,模拟废水的pH、吸附时间、吸附剂用量和Pb^2＋初始浓度、温度等因素对柚子皮吸附剂吸附废水中Pb^2＋均有显著影响。适宜的吸附条件为pH5．3-6．5,吸附时间1．5h,吸附剂用量10g·L^-1,Pb^2＋初始质量浓度100mg·L^-1,温度30℃。在该条件下,废水中Pb^2＋去除率在90％以上。柚子皮吸附剂对废水中Pb^2＋的吸附符合动力学二级反应方程,等温吸附规律可用Langmuir、Freundlich和Temkin模型进行较好的描述。     

Fenton氧化法修复石油污染土壤的研究进展

传统的Fenton氧化法（Fe2＋/H2O2）因反应速度过快、需要定期补充Fe2＋、控制pH值≤3等方面的限制而影响到石油烃类污染土壤的修复效果.本文综述了近年来Fenton反应中氧化剂、催化剂的改进及其对土壤中石油污染物的去除效率,揭示了土壤性质、反应条件、污染物结构及非均相催化剂比表面积等因素对去除效率的影响,介绍了超声波前置处理后,Fenton试剂与土壤上解吸的石油污染物接触几率的增加及石油烃类可生物降解性的提高,促进了微生物的后续处理效果,并对该领域的研究趋势进行了展望.     

Probability of intellectual disability is associated with soil concentrations of arsenic and lead

Background

The association between metals in water and soil and adverse child neurologic outcomes has focused on the singular effect of lead (Pb), mercury (Hg), and arsenic (As). This study describes the complex association between soil concentrations of As combined with Pb and the probability of intellectual disability (ID) in children.

Methods

We used a retrospective cohort design with 3988 mother child pairs who were insured by Medicaid and lived during pregnancy and early childhood in South Carolina between 1/1/97 and 12/31/02. The children were followed until 6/1/08, using computerized service files, to identify the diagnosis of ID in medical records and verified by either school placement or disability service records. The soil was sampled using a uniform grid and analyzed for eight metals. The metal concentrations were interpolated using Bayesian Kriging to estimate concentration at individual residences.

Results

The probability of ID increased for increasing concentrations of As and Pb in the soil. The Odds Ratio for ID, for one unit change in As was 1.130 (95% confidence interval 1.048-1.218) for Pb was 1.002 (95% confidence interval 1.000-1.004). We identified effect modification for the infants based on their birth weight for gestational age status and only infants who were normal size for their gestational age had increased probability of ID based on the As and Pb soil concentrations (OR for As at normal weight for gestational age = 1.151 (95% CI: 1.061-1.249) and OR for Pb at normal for gestational age = 1.002 (95% CI: 1.002-1.004)). For normal weight for gestational age children when As = 22 mg kg⁻¹ and Pb = 200 mg kg⁻¹ the risk for ID was 11% and when As = 22 mg kg⁻¹and Pb = 400 mg kg⁻¹ the probability of ID was 65%.

Conclusion

The probability of ID is significantly associated with the interaction between Pb and As for normal weight for gestational age infants.     

改性建筑垃圾作为橡胶填料的可行性研究

将废旧混凝土和废粘土砖经湿式表面改性后作为橡胶填料,辅以配合剂与丁苯橡胶进行混炼、硫化制得橡胶组合物,并将其与以等量轻质碳酸钙作为填料,按相同配比混炼、硫化制得的橡胶组合物的性能进行比较.结果表明,将加工成微米级别(0.5～12.0 μm)的建筑垃圾(废旧混凝土或废粘土砖)经水解双(三乙氧基硅基丙基)四硫化物(KH-8...     

壳聚糖的物理/化学改性及其对含酚废水的处理

将壳聚糖物理改性为球形颗粒,然后在微波辐射下,球形壳聚糖与柠檬醛接枝反应,再与NaBH4还原反应,制备一种新型环保材料--物化改性壳聚糖.采用红外光谱仪(IR)、X衍射仪(XRD)、电子显微镜(SEM)和比表面测定及孔径分析仪(BET)结构表征改性壳聚糖.通过含酚制药废水的动态小柱吸附实验,研究了时间、柱高和出水流速等...     

改性活性碳纤维电芬顿降解苯酚废水性能研究

采用微波改性、硝酸改性、磷酸改性及氨水改性等方法改性活性碳纤维(ACF-0),依次标记为ACF-1、ACF-2、ACF-3和ACF-4.以改性前后的活性碳纤维为阴极,电芬顿催化处理苯酚模拟废水,考察不同的改性方法对H2O2生成量、COD去除率、苯酚去除率及其中间产物的影响.结果表明,微波改性活性碳纤维的吸附性能及电催化活性最优,相比未改性活性碳纤维,经微波或酸碱改性后的活性碳纤维反应体系中,H2O2生成量均有所增加.苯酚在各电芬顿催化体系中的去除率大小依次是:ACF-1>ACF-3>ACF-4>ACF-2>ACF-0;COD去除率大小依次是:ACF-1>ACF-4>ACF-3>ACF-2>ACF-0,说明微波及酸碱改性有利于提高活性碳纤维的催化性能.此外,苯酚降解中间产物的生成也会受到改性方法的影响.     

Removal of polycyclic aromatic hydrocarbons from aqueous solution by raw and modified plant residue materials as biosorbents

Removal of polycyclic aromatic hydrocarbons （PAHs）, e.g., naphthalene, acenaphthene, phenanthrene and pyrene, from aqueous solution by raw and modified plant residues was investigated to develop low cost biosorbents for organic pollutant abatement. Bamboo wood, pine wood, pine needles and pine bark were selected as plant residues, and acid hydrolysis was used as an easily modification method. The raw and modified biosorbents were characterized by elemental analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. The sorption isotherms of PAHs to raw biosorbents were apparently linear, and were dominated by a partitioning process. In comparison, the isotherms of the hydrolyzed biosorbents displayed nonlinearity, which was controlled by partitioning and the specific interaction mechanism. The sorpfion kinetic curves of PAHs to the raw and modified plant residues fit well with the pseudo second-order kinetics model. The sorption rates were faster for the raw biosorbents than the corresponding hydrolyzed biosorbents, which was attributed to the latter having more condensed domains （i.e., exposed aromatic core）. By the consumption of the amorphous cellulose component under acid hydrolysis, the sorption capability of the hydrolyzed biosorbents was notably enhanced, i.e., 6-18 fold for phenanthrene, 6-8 fold for naphthalene and pyrene and 5-8 fold for acenaphthene. The sorpfion coefficients （Kd） were negatively correlated with the polarity index [（O＋N）/C], and positively correlated with the aromaticity of the biosorbents. For a given biosorbent, a positive linear correlation between logKoc and logKow for different PAHs was observed. Interestingly, the linear plots of logKoc-logKow were parallel for different biosorbents. These observations suggest that the raw and modified plant residues have great potential as biosorbents to remove PAHs from wastewater.     

铝钛改性MCM-41材料对污水中铅镉的吸附研究

研究了改性MCM-41材料对污水中重金属铅、镉离子的吸附行为。在MCM-41材料中加入Al、Ti两种诱因金属离子来合成新的Al-Ti-MCM-41及Ti-Al-MCM-41改性材料,通过氮气吸附-脱附等温线对Al-Ti-MCM-41(Al/Ti=1∶1)及Al-Ti-MCM-41(Al/Ti=2∶1)样品进行了表征,并采用改性后的MCM-41材料为吸附剂对含有二价铅、镉离子的溶液进行吸附实验,考察了吸附剂投加量,Pb2+、Cd2+初始质量浓度和吸附温度对吸附的影响。结果表明:改性Al-Ti-MCM-41(Al/Ti=1∶1)材料的最可几孔径和比孔容分别为16.68 nm和0.046 cm3/g,由BJH计算得到的平均孔径为17.02 nm;Al-Ti-MCM-41(Al/Ti=2∶1)的最可几孔径和比孔容分别为16.88 nm和0.083 cm3/g,由BJH计算得到的平均孔径为17.08 nm。Al-Ti-MCM-41(Al/Ti=1∶1)对Cd2+的吸附率为99.8%;Al-Ti-MCM-41(Al/Ti=2∶1)对Pb2+的吸附率为99.96%;Pb2+和Cd2+的吸附容量随吸附剂投加量的增加而降低,随离子初始浓度的增大而增加;温度越高越有利于吸附。该研究重点考察改性MCM-41材料在重金属铅镉离子污染治理中的性能,从而为解决重金属铅镉的污染,加强环境保护提供理论支撑和技术支持,具有明确的现实意义。     

苯酚、菲在BS-12/DTAB复配修饰膨润土上吸附的差异

为了探究复配修饰膨润土吸附疏水性不同的污染物的差异,采用阳离子型表面修饰剂十二烷基三甲基溴化铵(DTAB)对两性表面修饰剂十二烷基二甲基甜菜碱(BS-12)修饰膨润土进行复配修饰,采用批处理法研究复配修饰膨润土总修饰比例对苯酚和菲的等温吸附影响,并对比不同温度、pH值和离子强度条件下供试土样对苯酚和菲吸附量、热力学参数的差异.结果表明:随着总修饰比例的增大,复配修饰膨润土对苯酚及菲的吸附能力逐渐增强,0~50%CEC修饰比例下,菲的吸附率大于苯酚的吸附率,当修饰比例超出50%CEC后,苯酚的吸附率大于菲的吸附率,总修饰比例超出150%CEC后,膨润土对苯酚的吸附率变化趋于平缓,而对菲的吸附率开始呈下降趋势;随着土样总修饰比例的增大,温度对苯酚及菲吸附量的抑制效果降低;在KNO_3浓度为0.001~0.1 mol·L~(-1)时,苯酚及菲的吸附量均随着KNO_3浓度的增大而增大;随着pH值的升高,苯酚的吸附量逐渐增大,在pH=7处达到最大,而菲的吸附量则始终呈降低趋势.热力学参数显示,随着总修饰比例的增大,复配修饰土样对苯酚和菲的吸附自发性增强,混乱度增大,当总修饰比例超出150%CEC后,自发性减弱,混乱度下降.