Remediation of 2,4-dichlorophenol-contaminated groundwater using nano-sized CaO2 in a two-dimensional scale tank

• Nano CaO₂ is evaluated as a remediation agent for 2,4-DCP contaminated groundwater. • 2,4-DCP degradation mechanism by different Fe²⁺ concentration was proposed. • 2,4-DCP was not degraded in the system for solution pH>10. • The 2,4-DCP degradation area is inconsistent with the nano CaO₂ distribution area. This study evaluates the applicability of nano-sized calcium peroxide (CaO₂) as a source of H₂O₂ to remediate 2,4-dichlorophenol (2,4-DCP) contaminated groundwater via the advanced oxidation process (AOP). First, the effect and mechanism of 2,4-DCP degradation by CaO₂ at different Fe concentrations were studied (Fenton reaction). We found that at high Fe concentrations, 2,4-DCP almost completely degrades via primarily the oxidation of •OH within 5 h. At low Fe concentrations, the degradation rate of 2,4-DCP decreased rapidly. The main mechanism was the combined action of •OH and O₂^•−. Without Fe, the 2,4-DCP degradation reached 13.6% in 213 h, primarily via the heterogeneous reaction on the surface of CaO₂. Besides, 2,4-DCP degradation was significantly affected by solution pH. When the solution pH was>10, the degradation was almost completely inhibited. Thus, we adopted a two-dimensional water tank experiment to study the remediation efficiency CaO₂ on the water sample. We noticed that the degradation took place mainly in regions of pH<10 (i.e., CaO₂ distribution area), both upstream and downstream of the tank. After 28 days of treatment, the average 2,4-DCP degradation level was ≈36.5%. Given the inadequacy of the results, we recommend that groundwater remediation using nano CaO₂: (1) a buffer solution should be added to retard the rapid increase in pH, and (2) the nano CaO₂ should be injected copiously in batches to reduce CaO₂ deposition.     

Evaluation of the technoeconomic feasibility of electrochemical hydrogen peroxide production for decentralized water treatment

• Gas diffusion electrode (GDE) is a suitable setup for practical water treatment. • Electrochemical H₂O₂ production is an economically competitive technology. • High current efficiency of H₂O₂ production was obtained with GDE at 5–400 mA/cm². • GDE maintained high stability for H₂O₂ production for ~1000 h. • Electro-generation of H₂O₂ enhances ibuprofen removal in an E-peroxone process. This study evaluated the feasibility of electrochemical hydrogen peroxide (H₂O₂) production with gas diffusion electrode (GDE) for decentralized water treatment. Carbon black-polytetrafluoroethylene GDEs were prepared and tested in a continuous flow electrochemical cell for H₂O₂ production from oxygen reduction. Results showed that because of the effective oxygen transfer in GDEs, the electrode maintained high apparent current efficiencies (ACEs,>80%) for H₂O₂ production over a wide current density range of 5–400 mA/cm², and H₂O₂ production rates as high as ~202 mg/h/cm² could be obtained. Long-term stability test showed that the GDE maintained high ACEs (>85%) and low energy consumption (<10 kWh/kg H₂O₂) for H₂O₂ production for 42 d (~1000 h). However, the ACEs then decreased to ~70% in the following 4 days because water flooding of GDE pores considerably impeded oxygen transport at the late stage of the trial. Based on an electrode lifetime of 46 days, the overall cost for H₂O₂ production was estimated to be ~0.88 $/kg H₂O₂, including an electricity cost of 0.61 $/kg and an electrode capital cost of 0.27 $/kg. With a 9 cm² GDE and 40 mA/cm² current density, ~2–4 mg/L of H₂O₂ could be produced on site for the electro-peroxone treatment of a 1.2 m³/d groundwater flow, which considerably enhanced ibuprofen abatement compared with ozonation alone (~43%–59% vs. 7%). These findings suggest that electrochemical H₂O₂ production with GDEs holds great promise for the development of compact treatment technologies for decentralized water treatment at a household and community level.     

US/UV-Fenton体系处理高浓度罗丹明B特性研究

以罗丹明B为目标污染物,探索US/UV-Fenton体系对高浓度染料的降解规律.首先对比了Fenton、US-Fenton、UV-Fenton以及US/UV-Fenton体系降解RB的效果,通过建立反应动力学方程,发现各体系反应均符合伪一级动力学,进而分析US/UV-Fenton体系之间的协同因子.考察了初始溶液pH值、H₂O₂的投加量、H₂O₂与Fe²⁺摩尔比、反应时间和超声功率5个因素对US/UV-Fenton体系降解污染物的影响.结果表明,在最佳条件下罗丹明B溶液脱色率为99.9%,COD_Cr和TOC去除率分别为91.2%和61.85%,废水可生化性（BOD₅/COD值）由0.277提高至0.503.最后根据反应规律,分析了US/UV-Fenton体系的反应机制,深度探讨了体系之间的协同促进作用.     

苯醌类与苯醌亚胺类在日光/Fenton体系中的光敏性

基于苯酚降解中间产物（苯醌）、酸性甲基橙的目标化合物,研究了苯醌类与苯醌亚胺类在光/Fenton体系中的降解特性,分析了苯醌及酸性甲基橙的光敏特性,测定了光敏剂存在的情况下日光/Fenton和UV/Fenton体系中·OH的产量.结果表明,苯醌类光解,由于其光敏性好,能促进日光体系产生更多的·OH,日光/Fenton法好于UV/Fenton法.苯醌亚胺类降解,浓度较低时,UV/Fenton法好,浓度较高时,日光/Fenton法好,造成这种现象的主要原因是苯醌亚胺类光敏性一般,浓度低时日光体系中·OH的产量少于紫外体系,但苯醌亚胺类降解过程中有苯醌类生成,苯醌类的光敏性比苯醌亚胺类好,苯醌亚胺类浓度越高,其降解产物中苯醌类越多,进而导致日光体系中¹O₂、O₂^-·和·OH的产量多于紫外体系.     

易失稳瓦斯抽采钻孔加固技术数值模拟研究

针对松软煤层瓦斯抽采钻孔稳定性差、钻孔形变较大、钻孔及周围煤体漏风严重等造成钻孔密封难的技术难题,提出了预先采用加固技术来提高松软煤层瓦斯抽采钻孔的稳定性,合理的解决钻孔高效密封的现实难题。首先,阐述了易失稳瓦斯抽采钻孔加固技术的基本原理。其次,利用FLAC3D模拟软件对比分析了松软煤层、硬质煤层在不同固孔材料固化后钻孔周围位移场变化。研究表明:采取固孔措施后的钻孔相比措施前等值线分布稀疏,梯度较小,不同位置处的煤体的位移量差别较小。钻孔形成后,顶部位移量均大于底部位移量,左右两帮的位移量基本相同,有效的降低钻孔周边煤体的位移变化量,增强钻孔稳定性,为钻孔的高效密封提供了保障。     

基于Web的油气集输联合站变更管理信息系统设计与实现

为了完善采油厂实现油气集输联合站变更管理的信息化,减少变更活动中人工操作的工作量。提出了基于Web的变更管理系统架构方案,并运用Java技术及SQL数据库技术研发出变更管理信息系统。系统能够实现变更申请审批、变更风险评估、变更现场监督、变更历史记录查询以及变更作业票管理等功能,并在某油田多个油气集输联合站得到应用。应用结果表明,基于Web的变更管理系统具有较好的现场应用性,能够切实提高联合站变更管理的效率,有效地发挥变更管理在规章制度更新、过程工艺改进以及工作场所变化等方面的优势,从而通过进一步完善联合站安全管理体系,最终为企业安全生产提供工具化支持。     

受四环素影响的活性污泥胞内外聚合物特征

利用离心加超声的方法对处理四环素抗生素废水的活性污泥胞外聚合物(EPS)和胞内聚合物(IPS)进行提取,将其分为-溶解型胞外聚合物(slime)、松散附着型胞外聚合物(LB)、紧密附着型胞外聚合物(TB)、胞内聚合物(IPS).用BCA法和蒽酮-硫酸法测定了各层EPS和IPS溶液中的蛋白质和多糖含量,同时用三维荧光光谱扫描(EEM)和同步荧光光谱扫描(SFS)对其中的溶解性有机物(DOM)进行定性和定量分析,结果表明在EPS中的蛋白质和多糖的含量高于IPS,且蛋白质含量均比多糖含量高,而在slime和IPS中的蛋白质和多糖的含量高于LB和TB;低激发波长类色氨酸和高激发波长类色氨酸是EPS和IPS溶液的主要成分,且溶液中的溶解性代谢产物和芳香蛋白类物质相对含量在slime、LB、TB和IPS逐渐增加,而难降解有机物-腐殖酸类物质的相对含量逐渐降低;进水四环素浓度与污泥各层EPS和IPS溶液中DOM也具有较好的相关性;三维荧光法检测溶液中的DOM与化学分析测试出的蛋白质含量具有较好的相关性.     

A photolysis coefficient for characterizing the response of aqueous constituents to photolysis

UV photolysis and UV based advanced oxidation processes (AOPs) are gaining more and more attention for drinking water treatment. Quantum yield (ø) and molar absorption coefficient (ε) are the two critical parameters measuring the effectiveness of photolysis of a compound. The product of the two was proposed as a fundamental measure of a constituent’s amenability to transformation by photolysis. It was shown that this product, named the photolysis coefficient, k _p , can be determined using standard bench tests and captures the properties that govern a constituent’s transformation when exposed to light. The development showed the photolysis coefficient to be equally useful for microbiological, inorganic and organic constituents. Values of k _p calculated by the authors based on quantum yield and molar absorption coefficient data from the literature were summarized. Photolysis coefficients among microorganisms ranged from 8500 to more than 600000 and are far higher than for inorganic and organic compounds, which varied over a range of approximately 10 to 1000 and are much less sensitive to UV photolysis than the microorganisms.     

溴添加对燃煤烟气汞形态转化的影响

在一维管式沉降炉燃烧试验装置上,以汞的氧化率为评价指标,进行了溴化物种类、添加浓度、添加方式等因素对燃煤烟气汞形态转化影响的实验研究.结果表明: 溴对汞的氧化起促进作用,汞氧化率在一定的范围快速增加,超过此范围缓慢增加.不同的煤质,不同的溴添加物,这个范围是不同的;综合考虑添加成本,操作难易程度以及汞的氧化率,添加同浓度的溴化物时,汞的氧化率由低到高的排列顺序依次是:HBr炉后< HBr炉前< CaBr2< NaBr.在本实验条件下,汞的氧化效果最佳的条件是,褐煤中添加200mg/kg溴化钠,汞的氧化率约72%;亚烟煤添加1000mg/kg溴化钠,汞的氧化率约83%.     

DOC+CDPF对生物柴油燃烧颗粒排放特性的影响

以一台满足国五排放法规的车用柴油机为样机,研究加装氧化催化转化器DOC与催化型颗粒捕集器CDPF(DOC+CDPF后处理装置)前后,柴油机燃用B20燃料(燃料含20%体积掺混比的生物柴油)的颗粒排放特性.结果表明,在未加装该后处理装置时,该机排气颗粒数量浓度的粒径分布呈双峰形态,B20燃料的排气颗粒数量浓度的峰值粒径在10nm和50nm附近,纯柴油的排气颗粒数量浓度的峰值粒径在50nm和200nm附近.在颗粒粒径小于120nm的区域,该机燃用B20燃料的排气颗粒数量浓度大于纯柴油.加装该后处理装置后,该机排气颗粒数量浓度的粒径分布呈多峰形态,峰值粒径在10nm、20nm和60nm附近.加装DOC+CDPF后,不论是柴油还是B20燃料,与原机相比,柴油机排气颗粒总数量下降明显,其中60~200nm粒径范围的颗粒数量浓度降幅更为显著.在相同工况下,DOC+CDPF对柴油机燃用B20燃料的颗粒总数量净化效率高于纯柴油.