爆炸性环境用防爆对旋轴流式通风机的研制及应用

论述了新研制的KDZ型防爆对旋压抽式轴流通风机的工作原理、结构特点、主要技术指标及应用效果。     

Parathion degradation and its intermediate formation by Fenton process in neutral environment

The purpose of this study is to investigate parathion degradation by Fenton process in neutral environment. The initial parathion concentration for all the degradation experiments was 20 ppm. For hydrogen ion effect on Fenton degradation, the pH varied from 2 to 8 at the [H₂O₂] to [Fe²⁺] ratio of 2-2 mM, and the result showed pH 3 as the most effective environment for parathion degradation by Fenton process. Apparent degradation was also observed at pH 7. The subsequent analysis for parathion degradation was conducted at pH 7 because most environmental parathion exists in the neutral environment. Comparing the parathion degradation results at various Fenton dosages revealed that at Fe²⁺ concentrations of 0.5, 1.0 and 1.5 mM, the Fenton reagent ratio ([H₂O₂]/[Fe²⁺]) for best-removing performance were found as 4, 3, and 2, resulting in the removal efficiencies of 19%, 48% and 36%, respectively. Further increase in Fe²⁺ concentration did not cause any increase of the optimum Fenton reagent ratio for the best parathion removal. The result from LC-MS also indicated that hydroxyl radicals might attack the PS double bond, the single bonds connecting nitro-group, nitrophenol, or the single bond within ethyl groups of parathion molecules forming paraoxons, nitrophenols, nitrate/nitrite, thiophosphates, and other smaller molecules. Lastly, the parathion degradation by Fenton process at the presence of humic acids was investigated, and the results showed that the presence of 10 mg L⁻¹ of humic acids in the aqueous solution enhanced the parathion removal by Fenton process twice as much as that without the presence of humic acids.     

Degradation of rhodamine B by Fe(0)-based Fenton process with H2O2

Degradation of rhodamine B by Fe(0)-based Fenton process with H₂O₂ was investigated. The effects of H₂O₂ dose, Fe(0) dose, initial concentration of rhodamine B and initial pH value on the degradation of rhodamine B were examined. The results showed that the degradation and mineralization of rhodamine B occurred with low dose of H₂O₂ and Fe(0). The intermediates of rhodamine B were analyzed with UV-Vis spectrophotometry and ion chromatography and the mechanism of oxidative degradation of rhodamine B was also discussed. The reactive oxygen species (·OH) produced in Fe(0)-based Fenton process with H₂O₂ is the key to the degradation of rhodamine B by ways of N-de-ethylation, chromophore cleavage, ring-opening and mineralization.     

Chemical oxidation of cable insulating oil contaminated soil

Leaking cable insulating oil is a common source of soil contamination of high-voltage underground electricity cables in many European countries. In situ remediation of these contaminations is very difficult, due to the nature of the contamination and the high concentrations present. Chemical oxidation leads to partial removal of highly contaminated soil, therefore chemical oxidation was investigated and optimized aiming at a subsequent bioremediation treatment. Chemical oxidation of cable oil was studied with liquid H₂O₂ and solid CaO₂ as well as permanganate at pH 1.8, 3.0 and 7.5. Liquid H₂O₂ most effectively removed cable oil at pH 7.5 (24%). At pH 7.5 poor oil removal of below 5% was observed with solid CaO₂ and permanganate within 2 d contact time, whereas 18% and 29% was removed at pH 1.8, respectively. A prolonged contact time of 7 d showed an increased oil removal for permanganate to 19%, such improvement was not observed for CaO₂.Liquid H₂O₂ treatment at pH 7.5 was most effective with a low acid use and was best fit to a subsequent bioremediation treatment. To further optimize in situ chemical oxidation with subsequent bioremediation the effect of the addition of the iron catalyst and a stepwise liquid H₂O₂ addition was performed. Optimization led to a maximum of 46% cable oil removal with 1469 mM of H₂O₂, and 6.98 mM Fe(II) chelated with citric acid (H₂O₂:FeSO₄ = 210:1 (mol mol⁻¹). The optimum delivery method was a one step addition of the iron catalyst followed by step wise addition of H₂O₂.     

类Fenton试剂氧化降解土壤中PAHs及其影响因素研究

使用类Fenton试剂可以有效降解土壤中的多环芳烃（PAHs）。选择4种PAHs菲、芘、苯并[a]芘、茚并（1,2,3-cd）芘作为考察对象,研究了类Fenton试剂对土壤中PAHs的降解条件。单因素降解实验结果表明,在H2O2浓度为0.5mol/L,Fe（NO3）3浓度为0.1 mol/L,水土比为3∶1,反应时间为...     

Fenton试剂预处理化工综合废水的研究

以化学工业园区废水为研究对象初步研究了Fenton试剂预处理化工综合废水时各影响因子的作用机制,通过正交实验确定了Fenton反应的最佳操作条件为：反应时间70 min,硫酸亚铁投加量为2.6 mmol/L,温度为40℃,初始pH3.5,二价铁离子和过氧化氢的摩尔比为1∶8时,COD的去除率可达到60%以上,B/C值可...     

Relationship of surface changes to metal leaching from tungsten composite shot exposed to three different soil types

Physical changes that occur on the surface of fired shots due to firing and impact with soil may increase the dissolution of muniton metals. Increased metal dissolution could potentially increase metal transport and leaching, affecting metal concentrations in surface and groundwater. This research describes the relationship between the surface changes on fired tungsten-nickel-iron (94% W:2% Ni:4% Fe) composite shots and metals leaching from those shots. Tungsten composite shot was fired into, and aged in, three soil types (Silty Sand, Sandy Clay, and Silt) in mesoscale rainfall lysimeters to simulate live-fire conditions and subsequent interactions between the metals of the composite and soil. Leachate, runoff, and soil samples were collected from the lysimeters and analyzed for metal content. The shots were analyzed using scanning electron microscopy (SEM) to evaluate surface changes. SEM results indicated that a soil’s particle size distribution initially affected the amount of metal that was sheared from the surface of the fired W-composite shots. Shearing was greatest in soils with larger soil particles (sand and gravel); shearing was least in soils composed of small soil particles (fines). Increased metallic shearing from the shot’s surface was associated with increased W dissolution, compared to controls, following a simulated 1 year soil aging.     

Treatment of polychlorinated biphenyls in two surface soils using catalyzed H₂O₂ propagations

Two surface soils contaminated with polychlorinated biphenyls (PCBs) collected from Superfund sites in the New England region of the United States, Fletcher Paints and Merrimack Industrial Metals, were evaluated for field treatment at the bench level using catalyzed H₂O₂ propagations (CHP—modified Fenton’s reagent). The two soils were first evaluated for the potential for in situ treatment based on two criteria: (1) temperature (<40 °C after CHP reagent addition), and (2) hydrogen peroxide longevity (>24 h). In situ CHP remediation was more applicable to the Fletcher soil, while the Merrimack soil was better suited to ex situ treatment based on temperature increases and hydrogen peroxide lifetimes. Using the highest hydrogen peroxide concentrations appropriate for in situ treatment in each soil, PCB destruction was 94% in the Fletcher soil but only 48% in the Merrimack soil. However, 98% PCB destruction was achieved in the Merrimack soil using conditions more applicable to ex situ treatment (higher hydrogen peroxide concentrations with temperatures >40 °C). Analysis of degradation products by gas chromatography/mass spectroscopy showed no detectable chlorinated degradation products, suggesting that the products of PCB oxidation were rapidly dechlorinated and degraded. The results of this research document that the two PCB-contaminated soils studied can be effectively treated using aggressive CHP conditions, and that such a detailed bench study provides important information before implementing field treatment.     

Fenton氧化法预处理难降解高浓度化工废水

难降解高浓度化工废水直接采用生化法处理较为困难,为了减少后续水处理系统处理难降解物质的量,采用Fenton氧化法对难降解高浓度化工废水进行预处理且非常有效.重点考察了pH、投药比例、投药量以及反应时间对Fenton氧化法预处理高浓度化工废水的影响.经过实验得出最佳条件:pH为3.5,投药比例为1.0 mL 50％(质量...