通风速率对厌氧残余物沼渣堆肥的影响

以牛粪发酵残余物沼渣为原料,设置不同的通风速率进行堆肥,堆体的通风速率分别是0.2,0.5,0.8L/（min·kg OM）,分析堆肥20d过程中物理、化学和腐熟变化的特征,探讨不同通风速率对堆肥特性的影响.结果表明,通风速率为0.2,0.5L/（min·kg OM）的堆体维持高温阶段的时间为5d,而通风速率为0.8L/（min·kg OM）堆体维持高温阶段时间为4d;各堆体OM分解率分别是28.2%,32.9%,30.5%;通风速率对终产品pH值、电导率（EC）影响不大,pH值均能满足堆肥最优pH值,EC均未超过4mS/cm;通风速率为0.2L/（min·kg OM）的堆体终产品的NH₄⁺-N含量超过400mg/kg,各堆体终产品NO₃^--N的含量分别是2545,3146,2735mg/kg;各堆体终产品C/N分别是16.5,14.1,15.6;各堆体终产品GI值分别是92.2%,96.6%,82.7%.通风速率为0.5L/（min·kg OM）堆体E465/E665（E₄/E₆）最小,其腐殖化程度最高.综合分析,0.5L/（min·kg OM）是沼渣堆肥最为合适的通风速率.     

Thermal cracking of waste printed wiring boards for mechanical recycling by using residual steam preprocessing

Mechanical waste-processing methods, which combine crushing and separation processes for the recovery of valuable materials, have been widely applied in waste printed wiring board (PWB) treatment. However, both the high impact toughness and the tensile and flexural strengths of whole PWB with a laminated structure result in great energy consumption and severe abrasion of the cutters during multi-level crushing. In addition, the high temperatures occurring in continual crushing probably cause the decomposition of the polymer matrix. A thermal-crack method using residual steam as the heating medium has been developed to pre-treat waste PWBs. This treatment reduces the mechanical strength in order to improve the recovery rate of valuable materials in subsequent mechanical recycling. The changes of the PWBs’ macro-mechanical properties were studied to evaluate thermal expansion impacts associated with changes in temperature, and the dynamic dislocation micro-structures were observed to identify the fracture mechanism. The results showed that thermal cracking with steam at the temperature of 500 K can effectively attenuate the mechanical properties of waste PWBs, by reducing the impact, tensile and flexural strengths respectively, by 59.2%, 49.3% and 51.4%, compared to untreated PWB. Thermal expansion can also facilitate the separation of copper from glass fiber by reducing peel resistance by 95.4% at 500 K. It was revealed that the flexural fracture was a transverse cracking caused by concentrated stress when the heating temperature was less than 500 K, and shifted to a vertical cracking after exceeding 500 K.     

Effect of pH on the fate of fenazaquin in soil and water under laboratory-simulated condition

The persistence of fenazaquin (4-t-butylphenylethyl quinazolin-4-yl ether) was studied in three different soils, namely, Gangetic alluvial (pH 6.9), laterite (pH 5.3), and terai (pH 5.1) soil and in water at three different pH values (4.0, 7.0, and 9.2) under laboratory-simulated condition and samples were analyzed upto 60 days at regular intervals. Fenazaquin was applied at 5 and 10 µg g^?1 for each soil and at 0.2 and 0.4 µg mL^?1 to each water sample. Dissipation of fenazaquin in soil and water followed first-order kinetics irrespective of any treatments. The half-life of fenazaquin was found in the range of 47–64 days in soils and 3.49–37.6 days in water irrespective of dose. The persistence of fenazaquin in soil significantly increased in the order of Gangetic alluvial soil (pH 6.9) > laterite soil (pH 5.3) > terai soil (pH 5.1), whereas in water the trend of persistence was pH 9.2 ≥ pH 7.0 > pH 4.0. The dissipation of fenazaquin in soil and water was found to be dependent on pH irrespective of doses.     

Residues and dissipation of the pesticide emamectin benzoate under Egyptian field condition: a case study

A simple, rapid analytical procedure for the quantification of emamectin benzoate in tomato was developed using high performance liquid chromatography with fluorescence detector (HPLC-FLD). Emamectin benzoate residues were extracted from tomato samples with n-hexane:ethyl acetate (1:1, v/v). The method involved derivatization using trifluoroacetic anhydride and 1-methylimidazole, prior to analysis by HPLC-FLD. Limit of quantification of this method was found to be 0.01 mg/kg, while limit of detection was 0.005 mg/kg. The dissipation of emamectin benzoate on tomato was studied, and half-life (t_1/2) was estimated in a field study carried out at three different locations. Emamectin benzoate was sprayed on tomato at recommended dosage. Samples of tomato were collected at 0, 1, 3, 7, 10, and 15 days after treatment. The t_1/2 of emamectin benzoate when applied at the recommended doses in tomato was approximately 2.5 days. The residue of emamectin benzoate reached below the maximal residue limit (MRL) 10 days after spraying at the tested dosage. Hence, a safe pre-harvest interval of 10 days is suggested before harvesting of tomato. This study would also be helpful for the Egypt government to establish the MRL of emamectin benzoate in tomatoes and provide guidance on the proper and safe use of this insecticide.     

Assessment of hydrocarbon emissions from diesel invert mud residues treated in a bioreactor

Hydrocarbon emissions from a diesel invert mud residue (DIMR) were monitored while the hydrocarbons were being biodegraded in a solid‐phase bioreactor. Five to twenty percent of the reduction in diesel hydrocarbons was attributed to evaporation depending on the treatment, i.e. homogenization, cultivation, and aeration. Most of these volatile hydrocarbons were linear C₈ — C₁₂ alkanes and one‐ring aromatics. Of the treatments aeration had the largest effect on emissions; forced air through the bottom of the bioreactor cells increased emissions by three times over that of the non‐aerated cells. Cultivation increased hydrocarbon emission concentration as much as twofold over the pre‐cultivation value, however, emissions returned to the original levels within 12 hours. Homogenization had the least effect of all treatments. Diurnally, the emission rate was 40% higher in late afternoon than at midnight; the cause of which was probably atmospheric fluctuations such as temperature and solar radiation. The effects of daily atmospheric fluctuations were empirically modeled and taken into account for determining the total volume of emissions.     

改进型ABR+复合生物反应器处理糕点残渣废水

介绍了改进型ABR+复合生物反应器在糕点残渣废水处理工程实例中的应用,运行结果表明:该工艺运行稳定、操作简便、运行成本低,处理糕点残渣废水可获得良好的效果,出水水质达GB 8978—1996《污水综合排放标准》中的一级排放标准。     

Efficacy of rapeseed residue and eggshell waste on enzyme activity and soil quality in rice paddy

Addition of plant residue into soils improves soil physiochemical properties and its fertility. Rapeseed residue is an emerging N source to paddy soils via rice-rape double-cropping practice. The objective of this study was to evaluate the effects of rapeseed residue and eggshell waste on chemical changes and enzyme activity in the rice paddy soil. The powdered eggshells at 0, 1, 3, and 5% were applied once to 7.0 kg paddy repacked soils in each pot treated with the rapeseed residue or the conventional N, P, and K fertilisers. Eight rice seedlings (Oriza sativa L. cv. Ilmibyeo) (40 days after sowing) were transplanted to the treated each pot. The contents of total C (TC) and N (TN), and organic matter (OM) were significantly increased in soils treated with the rapeseed residue compared to the N, P, and K fertilisers. With the addition of eggshell containing ～92% CaCO₃, a considerable increase of soil pH was observed in soils treated with the rapeseed residue and the N, P, and K fertilisers, compared to the untreated soil. Activities of β-glucosidase, urease, and arylsulfatase enzymes were higher in soils treated with the rapeseed residue than soils treated with the N, P, and K fertilisers. The eggshell additions at 1, 3, and 5% into soils treated with the rapeseed residue increased enzyme activity mainly resulting from N mineralisation, whereas no change in enzyme activity was observed in the soils treated with the NPK fertiliser. The combined use of the rapeseed residue and the eggshells can be beneficial to improve soil environment.     

The effect of imazethapyr on soil microbes in soybean fields in northeast China

Large quantities of herbicides are used on agricultural soils, but the effects of herbicides on the structure of the soil microbial community have not been well investigated. In this study, soil from three soybean fields was investigated. The herbicide imazethapyr was applied in one year to soil 1 and in two sequential years to soil 2. Control soil received no imazethapyr. Microbial biomass and community structure were characterised using chloroform fumigation–extraction and phospholipid fatty acid (PLFA) determination. The imazethapyr residue was 1.62 μ g·kg^?1 in soil 1 and 1.79 μ g·kg^?1 in soil 2. The microbial biomass carbon and total PLFAs for soil 2 were much higher than for the other soils. PLFA profiles showed that fatty acids for Gram-negative and Gram-positive bacteria, as well as total bacteria and total fungi in soil 2 were higher than in other samples. Principal component analysis of the PLFAs showed that the structure of the microbial community differed substantially among the three different soybean field soils. Application of the herbicide imazethapyr to soybean fields clearly changed the soil microbial biomass and shifted the structure of the microbial community.     

Emission factors of gaseous carbonaceous species from residential combustion of coal and crop residue briquettes

Experiments were performed to measure the emission factors (EFs) of gaseous carbonaceous species, such as CO₂, CO, CH₄, and non-methane volatile organic compounds (NMVOCs), from the combustion of five types of coal of varying organic maturity and two types of biomass briquettes under residential burning conditions. Samples were collected in stainless steel canisters and 2,4-dinitrophenylhydrazine (DNPH) cartridges and were analyzed by GC-FID/MS and HPLC, respectively. The EFs from crop residue briquette burning were generally higher than those from coals, with the exception of CO₂. The dominant NMVOC species identified in coal smoke were carbonyls (41.7%), followed by C2 unsaturated hydrocarbons (29.1%) and aromatics (12.1%), while C2 unsaturated hydrocarbons were the dominant species (68.9%) emitted from the combustion of crop residue briquettes, followed by aromatics (14.4%). A comparison of burning normal crop residues in stoves and the open field indicated that briquettes emitted a larger proportion of ethene and acetylene. Both combustion efficiency and coal organic maturity had a significant impact on NMVOC EFs from burning coal: NMVOC emissions increased with increasing coal organic maturity but decreased as the combustion efficiency improved. Emissions from the combustion of crop residue briquettes from stoves occurred mainly during the smoldering process, with low combustion efficiency. Therefore, an improved stove design to allow higher combustion efficiency would be beneficial for reducing emissions of carbonaceous air pollutants.     

1,4-二氯苯在褐土中的残留量变化及对几种土壤酶活性的影响

1,4-二氯苯(1,4-DCB)作为农药和化工产品生产的原料和中间体,在环境中的含量越来越多.采用气相色谱法对不同浓度1,4-DCB处理后土壤中药物残留量进行了测定;对1,4-DCB处理后褐土土壤中几种重要的氧化还原酶(多酚氧化酶、过氧化氢酶、脱氢酶)和脲酶活性进行测定,用其改变来反应1,4-DCB残留对土壤生态系统的影响.结果发现:在1,4-DCB处理30 d后,土壤中1,4-DCB残留保持在44%~50%;1,4-DCB处理后土壤中多酚氧化酶活性呈现先升高后降低的现象,酶活性峰值因作用时间和作用浓度不同而不同.与多酚氧化酶活性改变趋势不同,1,4-DCB处理后土壤脱氢酶活性降低.两种酶活性与1,4-DCB处理浓度之间均具有一定的浓度-效应和时间-效应关系.与多酚氧化酶和脱氢酶活性变化结果不同,1,4-DCB处理后土壤脲酶和过氧化氢酶的活性则随着处理浓度升高和处理时间延长而升高.因此,土壤中不同酶活性对1,4-DCB污染产生了不同的响应.