驾驶舱空气动力源致振动响应分析研究

目的分析驾驶舱外形上多处凸起对驾驶舱内若干重要部位的振动响应的影响。方法首先采用大涡模拟方法,计算多种飞行工况下分离气流产生的作用于机身前段外表面的非定常脉动压力载荷,然后将所得载荷作用于前机身详细有限元模型上,获得所关心的驾驶舱内部分站位的加速度响应。结果通过对加速度响应结果的分析处理及与试飞测试数据对比,可知驾驶舱外形上多处凸起对驾驶舱内的振动量值影响比较大,气流分离对驾驶舱舱内振动贡献,峰值位置处达到了25%左右。结论相关计算结果可用于驾驶舱工效性评估和驾驶舱外形优化。     

汶川地震重灾区泥石流灾损土地利用及生态修复模式——以北川县都坝河小流域为例

汶川地震诱发了大量泥石流灾害,灾损土地利用和生态修复是灾区产业重建面临的重要课题。以北川县都坝河小流域为研究对象,通过调查灾损土地禀赋、灾害特征、土地需求,采取多因素耦合和关键因子限制分析法,探讨灾害胁迫条件下的经济活动与生态修复之间的互馈作用,结果表明：（1）流域新增土地供给源主要为泥石流灾损土地,土地资源化利用受灾害、聚落和产业结构控制;（2）灾损土地根据成因划分为沟口堆积型、沟道冲淤型以及岸坡侵蚀型,三者的肥力、安全性及交通条件等特征具有显著差异;（3）基于“因灾分区、耕地优先、产业共建、美居造景”的原则,建立了灾损土地的利用方式和生态修复模式,并选取杨家沟进行验证,沟域灾损土地利用方式为生态林地、产业林地及优质耕地,分别占比28.5%、56.3%、15.2%,生态修复措施主要为提高土地安全度、提升植被覆盖率和增强水保功能。该研究建立的震区土地利用和生态修复模式可有力协调人地矛盾、发展绿色经济和提升人居环境。     

星形线电除尘器内EHD流动与粒子行为数值模拟

为了研究星形线电除尘器内电流体动力学（EHD）流动与荷电粒子运动行为及两者间相互作用,构建了线板式电除尘器（ESP）内关于EHD和带电粒子运动学的耦合数值模型.该模型采用有限体积法离散求解电场方程和空间电荷方程,在拉格朗日法下建立带电粒子运动方程,并与FLUENT湍流模型进行耦合.利用这一模型,对3种电场风速下星形线电除尘器内流动形态与粒子运动行为进行了细致模拟,并分析了二次流动对气流、粒子浓度分布的影响.结果表明,星形线电除尘通道内二次流动对流动形态和粒子浓度分布存在显著作用.随电场风速的降低,这一作用将越明显.EHD流动对细小荷电粒子运动的影响更为显著.二次流动产生涡旋并作用于主流来影响粒子运动行为.收尘板面的涡旋挤压粒子流远离壁面向流动中心运动,放电极下游的涡旋则促进粒子流向收尘板壁面靠近.此外,由于捕集通道中强二次流的存在,Deutsch计算式对除尘效率、特别是对于亚微米粒子捕集效率的计算并不准确.     

中国乘用车塑料的动态物质流分析

结合行业信息并基于动态物质流模型,本文对1950~2050年间中国乘用车塑料流量与存量进行了历史测算与情景分析.历史测算表明：1950~2018年国内乘用车行业累计消耗了以聚丙烯（PP）、聚氨酯（PU）等为主的塑料3278万t,产生了337万t塑料废弃物;报废汽车拆解后的车用废塑料仅28%得到回收利用.针对未来情况,本文设计了乘用车保有量、单车塑料使用量两大关键因素下的不同情景组合.结果显示车用塑料存量及废塑料产生量将大幅增长,到2050年存量将达到0.7~2.7亿t,废塑料产生量将达到500~1600万t,汽车拆解和塑料再生等相关行业对此应充分关注.到2050年车用废塑料回收率若能提升至80%,将减少376万t/a的车用废塑料填埋或焚烧,显著减少环境风险.     

中国报废汽车中铂族金属回收潜力估算

基于Gompertz模型预测中国2018~2050年民用汽车的社会保有量;在此基础上,采用物质流分析方法估算得出我国汽车高峰报废年限大约为9a.然后,通过市场供给A模型预测我国2018~2025年汽车报废量,结果显示,我国汽车报废量到2025年将达到2535.05万辆,并且地理空间分布极不均衡.基于上述汽车报废量的时空分布,测算不同技术发展情景下废汽车三元催化剂中的铂族金属回收潜力和需求量.结果显示：如果按照当前催化剂消耗水平,全国铂族金属的需求量均在2019年达到峰值,铂钯铑分别达到4.57,65.70,7.92t,有望实现行业内闭环供应;如果以欧盟汽车尾气治理标准为目标,而现有汽车技术不发生根本变化,需求量将大幅增加,铂钯铑分别在2020年达到峰值85.01,109.38,8.37t,存在严重的供需矛盾.为此,建议在汽车生产者责任延伸制度中,关注废催化剂的回收和再生利用,以促进前端生产环节在不同技术选择中考虑稀贵金属的供给限制.     

双区静电除尘器的数值模拟研究

采用数模拟的方法研究了双区静电除尘器内流场分布、颗粒荷电及颗粒运动等难以直接测量的物理过程,构建了双区静电除尘过程完整的数值模型.采用泊松方程、电流连续性方程和匀强电场方程描述电场,采用N-S方程和雷诺应力标准湍流模型描述流场,采用拉格朗日法描述颗粒运动轨迹.通过截面风速与颗粒去除率的模拟值与实验值的对比,验证了数值模型在模拟内部流场和颗粒运动时的准确性.数值模拟结果表明：双区静电除尘器内部流场分布对入口风速的变化非常敏感;颗粒荷电方式占比由颗粒粒径决定;荷电区内颗粒向极板的趋近过程由流体曳力和电场力共同完成,收尘区内的趋近过程则由电场力主导;入口流速通过改变颗粒前进速度和内部流场形态来影响颗粒运动轨迹.     

新疆生态功能区划初探

“新疆生态功能区划”参考了“中国综合生态环境区划方案”，以《生态功能区划暂行规程》为依据，充分考虑新疆独特的地理分布格局，将新疆分为5个生态区，18个生态亚区，79个生态功能区。“新疆生态功能区划”对科学有效地管理新疆生态环境，因地制宜地实施保护和治理策略，保证社会经济可持续发展具有重要意义。     

Evaluation of Water Quality in the Chillán River (Central Chile) Using Physicochemical Parameters and a Modified Water Quality Index

The Chillán River in Central Chile plays a fundamental role in local society, as a source of irrigation and drinking water, and as a sink for urban wastewater. In order to characterize the spatial and temporal variability of surface water quality in the watershed, a Water Quality Index (WQI) was calculated from nine physicochemical parameters, periodically measured at 18 sampling sites (January–November 2000). The results indicated a good water quality in the upper and middle parts of the watershed. Downstream of the City of Chillán, water quality conditions were critical during the dry season, mainly due to the effects of the urban wastewater discharge. On the basis of the results from a Principal Component Analysis (PCA), modifications were introduced into the original WQI to reduce the costs associated with its implementation. WQI_DIR2 and WQI_DIR, which are both based on a laboratory analysis (Chemical Oxygen Demand) and three (pH, temperature and conductivity), respectively, four field measurements (pH, temperature, conductivity and Dissolved Oxygen), adequately reproduce the most important spatial and temporal variations observed with the original index. They are proposed as useful tools for monitoring global water quality trends in this and other, similar agricultural watersheds in the Chilean Central Valley. Possibilities and limitations for the application of the used methodology to watersheds in other parts of the world are discussed.     

RISK ASSESSMENT METHODOLOGY FOR KARST AQUIFERS: (2) SOLUTE-TRANSPORT MODELING

Ground-water flow and solute-transport simulation modeling are major components of most exposure and risk assessments of contaminated aquifers. Model simulations provide information on the spatial and temporal distributions of contaminants in subsurface media but are difficult to apply to karst aquifers in which conduit flow is important. Ground-water flow and solute transport in karst conduits typically display rapid-flow velocities, turbulent-flow regimes, concentrated pollutant-mass discharge, and exhibit open-channel or closed-conduit flow. Conventional ground-water models, dependent on the applicability of Darcy`s law, are inappropriate when applied to karst aquifers because of the (1) nonapplicability of Darcian-flow parameters, (2) typically nonlaminar flow regime, and (3) inability to locate the karst conduits through which most flow and contaminant transport occurs. Surface-water flow and solute-transport models conditioned on a set of parameters determined empirically from quantitative ground-water tracing studies may be effectively used to render fate-and-transport values of contaminants in karst conduits. Hydraulic-flow and geometric parameters developed in a companion paper were used in the surface-water model, TOXI5, to simulate hypothetical slug and continuous-source releases of ethylbenzene in a karst conduit. TOXI5 simulation results showed considerable improvement for predicted ethylbenzene-transport rates and concentrations over qualitative tracing and analytical ground-water model results. Ethylbenzene concentrations predicted by TOXI5 simulations were evaluated in exposure and risk assessment models.     

环境影响评价中河流调查、监测方法的探讨

根据实际工作的经验，对中小河流水环境研究中的河段选择、断面布设、测量采样、污染源调查、化验分析等几个方面进行初步探讨分析。