从废FCC催化剂和废汽车尾气净化催化剂中回收稀土的研究进展

以稀土元素(简称稀土)用量较大的废FCC催化剂和废汽车尾气净化催化剂为研究对象,分析总结了两类废催化剂中稀土的成分和回收方法。从废催化剂中回收稀土普遍采用先浸出、后分离提纯的方法。浸出普遍采用无机酸(多为盐酸),分离方法包括溶剂萃取法、化学沉淀法等,最后经焙烧得到稀土氧化物。为从废催化剂中高效回收稀土,可着重考察新浸出机制的引入、分离方式的选择、分离试剂的应用,以及浸出和分离条件的优化,从而为实现工业化回收提供技术支持。     

从废阴极射线管含铅玻璃中回收金属铅的研究进展

随着显像管技术的发展,我国迎来了大量阴极射线管(CRT)玻璃的报废期。废弃的CRT玻璃中含有大量的铅,属于危险废物。从国内外废CRT含铅玻璃的处理处置现状出发,归纳总结了废CRT含铅玻璃中铅的分离回收技术工艺,并分析了其特点及存在的问题。指出,未来该领域新技术的研发应同时注重4个方面:铅的回收率高,对玻璃中的其他组分能够有效利用,满足经济可行性要求,便于工业化生产。     

铜基钯镍退镀液中铜的再生利用

采用硫氰酸盐沉铜法回收铜基钯镍退镀液中的铜。沉铜的优化工艺条件为初始Cu~(2+)质量浓度3.84 g/L、Cu~(2+)与Na SCN及Na_2SO_3摩尔比1∶4∶0.6、沉铜反应温度30℃,陈化时间24 h,沉铜反应后退镀液中Cu~(2+)残留量仅为0.025 mg/L。在此条件下加入聚乙二醇1.5 g/L,并提高分散液温度至50℃,可制得平均粒径为0.472μm的CuSCN超细粉体。CuSCN粉体为类球形,为含α、β两种晶型的混晶。     

污泥灰中磷的湿化学法回收技术研究进展

从污泥灰中磷的提取、磷与重金属的分离和磷产品的制备3方面综述了国内外湿化学法回收污泥灰中磷的研究进展,重点分析了磷提取过程中的各种影响因素,并对今后污泥灰中磷的湿化学法回收技术的研究方向进行了展望。指出:利用萃取的方法将提取液中的无机强酸萃取出来并回收重复利用,可大幅降低酸的消耗量;在回收磷的同时可研究回收不同种类金属的方法,尤其是价值较大的重金属,以进一步提高污泥灰资源的回收价值。     

Assessing non‐metro recovery across two continents: issues and limitations

Rural and remote areas of countries such as Australia and the United States are less well‐resourced and often poorer than their city counterparts. When a disaster strikes, therefore, their long‐term recovery can be impeded by being situated ‘over the horizon'. Nonetheless, they are likely to enjoy higher social capital, with ‘locals’ banding together to help restore economic and social life in the wake of a calamitous incident. At the same time, a repeat of extreme events, springing in part from alteration to the landscape through intense human occupation, threatens to derail sustainable recovery processes everywhere, suggesting that renewed emphasis needs to be placed on preparedness. Improved metrics are also required, spanning both pre‐ and post‐disaster phases, to determine effectiveness. Moreover, a focus on the ‘hardening’ of towns offers a better return in limiting damage and potentially hastens the speed of recovery should these places later fall victim to extreme events.     

加油站油气排放治理技术

分析了国内外加油站的油气排放治理现状,指出对我国加油站的油气排放进行全面治理已迫在眉睫。针对我国加油站油气排放的特点并在现有技术基础上,提出了“冷凝+吸附”油气处理集成技术,并借助Aspen模拟软件及实验对此技术进行了研究,结果认为该技术回收率高达99.2％,油气尾气浓度可控制在11.2 g/m³。该技术原理简单,成本低,可为提高加油站的本质安全、环境保护及节能降耗提供有力的技术支撑。     

Simulating Direct and Indirect Damages to Commercial Fisheries from Marine Sand Mining: A Case Study in Korea

Rapid growth in marine sand mining for construction and other uses poses environmental challenges to coastal nations virtually worldwide. Yet the development of management policies, such as a system of fees imposed on operators for damage caused by mining, has been frustrated by a lack of studies to support such measures. Adapting a Beverton-Holt bioeconomic model, this paper attempts to contribute to the estimation of external costs to commercial fisheries due to marine mining. Using the major mining area of Ongjin in Korea as a case study, we estimate economic losses in use value of commercial fisheries through the time to recovery of the injured resource stocks. Present value of lost catch over a 1-year period from mining to resource recovery is estimated at $38,851 for a single “prototype” mining site. Estimated cumulative damages due to recurring mining for 5 and 10 years are $1.5 million and $2.2 million, respectively, at 20 mining sites. Sensitivity analyses are used to examine the effects of alternative assumptions to assess the many sources of uncertainty. Using a form of meta-analysis, dose-response information is used to assess the excess mortality the mining sediment plume has on eggs and larvae and, ultimately, on the value of lost catch ($841). Also addressed is the importance of specifying the appropriate “premining” conditions against which to assess environmental losses at the mining site. Damages estimated with premining fish populations are $23,066 higher than is the case using postmining conditions. Overall, the illustrative results suggest the variety of complex conditions which influence damage to fisheries from mining and which can benefit from further study to improve management guidelines. An erratum to this article can be found at     

清罐油泥资源化综合利用技术应用

采用清罐含油污泥资源化综合利用技术,处理后的含油污泥经检测其灰渣重金属含量均小于我国GB 15618-1995《土壤环境质量标准》和GB 4284-84《农用污泥中污染物控制标准》,灰渣浸出液达到GB5085.3-2007《危险废物鉴别标准浸出毒性鉴别》二级标准、燃烧后产生的废气和烟尘达到GB 13271-2001《锅炉大气污染物排放标准》。解决了清罐油泥处理难的问题,同时符合国家推行清洁生产,大力发展循环经济的要求,使生产过程中的废物减量化、资源化、无害化,减小了油泥排污费用,具有显著环境效益和社会效益。     

Di（2-ethylhexyl）phosphoric acid-coconut oil supported liquid membrane for the separation of copper ions from copper plating wastewater

Permeation of Cu(II) from its aqueous solution through a supported liquid membrane (SLM) containing di(2-ethylhexyl)phosphoric acid (D2EHPA) carrier dissolved in coconut oil has been studied. The effects of Cu(II), pH (in feed), H2SO4 (stripping) and D2EHPA (in membrane) concentrations have been investigated. The stability of the D2EHPA-coconutoil has also been evaluated. High Cu(II) concentration in the feed leads to an increase in flux from 4.1 × 10-9 to 8.9 × 10-9 mol/(m2·s) within the Cu(II) concentration range 7.8×10-4-78.6×10-4 mol/L at pH of 4.0 in the feed and 12.4 × 10-4 mol/L D2EHPA in the membrane phase. Increase in H2SO4 concentration in strip solution leads to an increase in copper ions flux up to 0.25 mol/L H2SO4, providing a maximum flux of 7.4 × 10-9 mol/(m2·s). The optimum conditions for Cu(II) transport are, pH of feed 4.0, 0.25 mol/L H2SO4 in strip phase and 12.4 × 10-4 mol/L D2EHPA (membrane) in 0.5 (m pore size polytetrafluoroethylene (PTFE) membrane. It has been observed that Cu(II) flux across the membrane tends to increase with the concentration of copper ions. Application of the method developed to copper plating bath rinse solutions has been found to be successful in the recovery of Cu(II). rane. It     

加油站三次油气回收技术现状分析与性能提升技术研究

针对近年来加油站三次油气回收设备排放频繁超标的问题,对加油站已投用的三次油气回收设备进行调研分析,找出导致三次油气回收设备排放超标的原因,通过数据模拟对相关结论进行验证,提出解决三次油气回收设备超标排放问题的技术提升措施。