Energy-efficient modification of reduction-melting for lead recovery from cathode ray tube funnel glass

Lead can be recovered from funnel glass of waste cathode ray tubes via reduction melting. While low-temperature melting is necessary for reduced energy consumption, previously proposed methods required high melting temperatures (1400 °C) for the reduction melting. In this study, the reduction melting of the funnel glass was performed at 900–1000 °C using a lab-scale reactor with varying concentrations of Na₂CO₃ at different melting temperatures and melting times. The optimum Na₂CO₃ dosage and melting temperature for efficient lead recovery was 0.5 g per 1 g of the funnel glass and 1000 °C respectively. By the reduction melting with the mentioned conditions, 92% of the lead in the funnel glass was recovered in 60 min. However, further lead recovery was difficult because the rate of the lead recovery decreased as with the recovery of increasing quantity of the lead from the glass. Thus, the lead remaining in the glass after the reduction melting was extracted with 1 M HCl, and the lead recovery improved to 98%.     

Thermal Strain in Fire Fighters While Wearing Task-Fitted Versus EN 469:2005 Protective Clothing During a Prolonged Rescue Drill

Fire fighters are normally overprotected during their working hours because of the tendency to keep the personal protection level sufficiently high in case of the worst possible scenarios. This study investigated the effects of task-fitted protective clothing on thermal strain in fire fighters as compared to EN 469:2005 protective clothing during a prolonged (2 1/2 hrs) job-related rescue drill under neutral and hot climates. The subjects were 23 healthy, physically fit professional male fire fighters aged 26–44 years. Measurements included cardiovascular and thermal responses and subjective assessments. Wearing task-fitted clothing during rescue tasks in a neutral climate considerably reduced total thermal and cardiovascular strain in prolonged rescue work. The fire fighters also perceived physical work as significantly harder on average, and reported more intense subjective discomfort while wearing EN 469:2005 as compared to task-fitted clothing.     

煤化工煤焦油逸出废气回收利用技术研究

通过对河北省秦皇岛市耀华玻璃工业园有限公司地下300m,储油罐煤焦油逸出废油气进行实验室模拟实验,现场实际工程设计、制造、安装、调试、检验等实践研究,采用“冷凝＋自激吸收器＋吸收＋活性炭吸附”油气处理回收技术,并独创了自激吸收器新技术,处理后的煤焦油逸出废气完全达到了国家《炼焦化学工业污染物排放标准》（GB16171—2012）的相关要求。     

石油石化有机液体装载油气回收技术评估

对炼化企业和储油库企业有机液体装载油气回收技术路线开展了调查分析,从设计气量和浓度、现场监测、技术路线对比等方面对装载油气回收技术进行了评估,指出存在的问题并对技术路线分三类提出了选择建议;通过减排效益分析,提出油气回收可实现全成本微盈利,对企业具有环保和经济双赢效益。     

Optimization of "Serpa" cheese whey nanofiltration for effluent minimization and by-products recovery

Second cheese whey (SCW) is a by-product of cheese and curd cheese production that is usually not recovered and therefore substantially contributes to the negative environmental impact of the cheese manufacture plants. Membrane technology, namely nanofiltration (NF), is used in this work for the recovery of SCW organic nutrients, resulting from "Serpa" cheese and curd production. The SCW is processed by NF to recover a rich lactose fraction in the concentrate and a process water with a high salt content in the permeate. The permeation experiments were carried out in a plate & frame NF unit, where two NF membranes (NFT50 and HR-95-PP) were characterized and tested. The NF permeation experiments were performed accordingly with two different operation modes: total recirculation and concentration. In order to select the best membrane and operating pressure for the SCW fractionation, total recirculation experiments were carried out. The NF modeling was also performed, in terms of permeate fluxes and rejection coefficients using the resistances-in-series model and the solution-diffusion model, respectively. After the membrane selection, the concentration experiments showed that the selected membrane (NFT50) at 3.0MPa allows a water recovery of approximately 80%, concentrating the SCW nutrients approximately 5 times. Therefore, the NF operation can successfully reduce the wastewater organic load and simultaneously contributes to the valorization of the cheese and curd cheese manufacture by-products.     

除氧器乏汽的回收再利用

介绍了国电吉林热电厂对热力式除氧火力发电机组的高压除氧器乏汽进行全部回收,创造了可观的经济、环境和社会效益,在当前国际国内能源供应形势紧张、大力提倡节能环保的情况下,具有积极意义.     

黑液蒸发器液室结垢的原因及改进措施

造纸黑液治理技术中，蒸发器结垢是黑液蒸发中普遍存在而难以解决的问题之一。在此通过对板式降膜蒸发器液室结垢原因的分析与探讨，多角度，多侧面提出预防及改进措施，达到提高蒸发效率的目的。     

壳聚糖复合吸附剂对油的吸附性能

以天然可生物降解的壳聚糖和硬脂酸为原料,通过壳聚糖2位氨基与硬脂酸的羧基相互作用,引入疏水烷基链,制备了疏水的壳聚糖-硬脂酸复合吸附剂(简称复合吸附剂),采用傅立叶红外光谱、X射线衍射对复合吸附剂的结构进行表征,并考察了复合吸附剂对油的回收性能.实验结果表明:壳聚糖和硬脂酸以离子形式结合得到复合吸附剂;当硬脂酸与壳聚糖质量比为0.7时,硬脂酸的结合量最大;复合吸附剂对油的吸附量、保油率、脱附率的顺序分别为花生油(14.93 g/g)>甲基硅油(10.71 g/g)>液体石蜡(9.37 g/g),花生油(94.51%)>液体石蜡(90.74%)>甲基硅油(78.69%),花生油(95.62%)>液体石蜡(93.27%)>甲基硅油(90.73%).     

废定影液银的回收利用

用硫化钠从废定影液中以硫化银的形式回收银，高温灼烧硫化银得纯银，再制备成硝酸银。硝酸银纯度达９９．５％，银回收率为９３％。