我国的自然遗迹保护与自然遗迹类保护区的建设

我国自然遗迹类保护区数量少,代表性参差不齐,不适应丰富多样的自然遗迹保护的要求。依靠自然遗迹类保护区、非自然遗迹类保护区、风景名胜区和森林公园等几种形式,使200多处有代表性的自然遗迹得到保护,但几者之间有重迭交叉,总的覆盖面也不完全。应加强全国自然遗迹保护的统一规划与协调,既探索综合保护的路子,也要补建一批自然遗迹类保护区,完善多元化保护的格局。      

铈改性水葫芦生物炭对磷酸盐的吸附特性

本研究通过共浸渍-热解法开发了一种铈改性水葫芦生物炭吸附剂（Ce-BC）,用以去除实际废水中的磷酸盐,考察了Ce-BC投加量、废水pH值、反应时间及共存的竞争性离子对吸附过程的影响.结果表明,当Ce-BC投加量为0.4 g·L^-1,初始磷酸盐溶液pH值介于3~10时,Ce-BC对磷酸盐的吸附性能最佳,最大吸附量达到35.00 mg·g^-1.Ce-BC对磷酸盐的吸附过程符合准二级动力学模型,并能在1 h内达到98%的磷酸盐去除率,吸附速率快.此外,Ce-BC具有较高的抗阴离子干扰能力,且具有良好的再生性能,Ce-BC经过4次再生后仍能保持90%以上的初始吸附效率.场发射扫描电镜-能量色散光谱（FESEM-EDS）、傅里叶红外光谱（FTIR）、X射线衍射光谱（XRD）和X射线光电子能谱（XPS）等表征结果表明,Ce-BC对磷酸盐的吸附机制主要包括配体交换和内球络合.本研究制备的Ce-BC吸附剂,可以有效去除及回收实际生活污水中的磷酸盐,在避免水体富营养化的同时实现磷资源的回收利用.     

报废汽车内饰件塑料浮选技术研究

报废汽车内饰件塑料品种复杂、难以分选,为此,以分离汽车内饰件中4种主体塑料——PP(聚丙烯)、ABS(丙烯腈-丁二烯-苯乙烯)、PC(聚碳酸酯)、PVC(聚氯乙烯)为目标,利用实验室自制浮选设备,考察了浮选液流量、溶气罐压力、润湿液浓度等因素对浮选效果的影响. 结果表明:当溶气罐压力为0.22 MPa、浮选液流量为10 L/min、润湿液中ρ(单宁酸)为15 mg/L时,一级浮选PP、ABS、PC、PVC效果达到最佳,其中PP和ABS为上浮料,二者上浮率分别为100%和98.63%;PC和PVC为下沉料,二者下沉率分别为98.95%和100%. 当溶气罐压力为0 MPa、浮选液流量为6 L/min、润湿液中ρ(单宁酸)为10 mg/L时,二级浮选完全分离PP/ABS;当溶气罐压力为0.24 MPa、浮选液流量为10 L/min、润湿液采用10 mg/L单宁酸和10 mmol/L癸二酸二丁酯时,二级浮选分离PC/PVC效果达到最佳,PC上浮率为92.87%,PVC下沉率为91.41%. 通过二级浮选分离,PP、ABS、PC、PVC的最终分离率分别达到100%、98.63%、92.87%和91.41%,显示出该二级浮选工艺在报废汽车内饰件塑料分选方面具有较为广阔的应用前景.      

化学链燃烧中钙基载氧体CaSO4再生的氧化反应机理

在热重和红外联用进行等温实验的基础上,探讨了氧体积分数为10%、20%,970～1150℃温度范围内化学链燃烧过程中钙基载氧体再生(CaS)的氧化特性.结果显示,CaS氧化的直接产物主要为CaSO4,只有在诱导期生成极少量CaO和SO2;但CaSO4与CaS还可进一步反应,生成更多CaO和SO2.通过对氧气浓度和温度的实验条件改变,研究了CaSO4的转化率、转化速率,并辅以SO2析出速率分析,获得了CaSO4相对于CaO的瞬时选择性、CaSO4的收率和反应选择率.结果表明,钙基载氧体CaSO4再生过程氧化反应的适宜条件为温度970～1000℃以及较高的氧气气氛,这不仅可以抑制SO2的排放量从而得到较高的反应选择率,同时反应过程也具有较高的转化速率.     

锰铈脱硝催化剂的制备及其再生性能研究

采用等体积浸渍法制备了一系列Mn-Ce-Ox复合氧化物脱硝催化剂用于NH3选择性催化还原(NH3-SCR)NO。考察了Mn/Ce摩尔比、焙烧温度、H2O和SO2对Mn-Ce-Ox复合氧化物脱硝催化剂活性的影响及催化剂中毒再生性能。结果表明:当NH3:NO=1:1,空速为5 000 h-1,550℃焙烧制得的Mn/Ce摩尔比为5∶1的Mn-Ce-Ox复合脱硝催化剂活性最佳,活性温度窗口为100~260℃,在此温度区间内催化剂活性大于90%。200℃时,Mn-Ce-Ox复合催化剂活性最高为97.84%;在10%(V/V)H2O蒸汽和300×10-6SO2共存条件下,200℃时,催化剂活性在开始反应2.5 h内迅速下降至53%左右,并在之后的6 h内没有明显变化;中毒催化剂经常温水洗再生处理、质量分数为3%的硝酸溶液再生处理和550℃焙烧2 h再生处理后200℃活性均能恢复到90%以上,其中中毒催化剂经质量分数为3%硝酸处理后活性恢复率最高。     

Experimental investigations on regeneration energy and energy management strategy in series hydraulic/electric synergy system

This research work draws an insight into the experimental investigations on a series hydraulic/electric synergy system—a green transportation system. An experimental test rig of the system with all necessary sensors and instrumentation has been developed to study the energy saving through hydraulic regenerative braking. The effect of various system parameters, such as braking time, maximum accumulator pressure, pre-charge pressure of hydro-pneumatic accumulator, volumetric displacement of the hydraulic master pump, and hydraulic regeneration pump on the quantum of regeneration energy, was analyzed. In addition, an AMESim model of the real-time experimental test rig has been developed and validated with experimental results. A set of five different experimental designs (parameter variations) of the system is defined with the available standard component sizes. The best design is selected of the available experimental designs based on the maximum hydraulic regeneration energy and regeneration efficiency. It was observed that the selected design has an energy efficiency of 13.3% and a regeneration efficiency of 43.8%. An accumulator-centric control strategy for energy management is developed and implemented on the experimental test rig configured with the selected design. The effectiveness of the control strategy is tested through experiments and simulation on the developed test rig.     

Reflections on network governance in Africa's forestry sector

International forestry governance is an integral part of the global policy debates on how to prevent deforestation, illicit extraction, and unsustainable timber practices. Africa is an important producer of timber, yet the region is beset by a lack of capacity and other governance challenges in the management of its forestry sector. We employ a network governance analysis to examine the extent to which the evolution and operation of the Forest Stewardship Council (FSC) and la Commission des Forêts d'Afrique Centrale (COMIFAC) have addressed governance challenges. We assess the strengths and weaknesses of these two leading examples of international forestry governance by introducing recent evidence and insights from Africa. We conclude with a policy‐relevant discussion of how the FSC and COMIFAC might enhance authority, legitimacy, and effectiveness and improve forestry governance in Africa and other parts of the world.     

From waste hot-pot oil as carbon precursor to development of recyclable attapulgite/carbon composites for wastewater treatment

The utilization of waste products as valuable materials was a technical imperative for waste management. In this study, the cost-effective attapulgite/carbon(APT/C) composite was developed for wastewater treatment using waste hot-pot oil as a carbon precursor through a facile one-step calcination process. The APT/C composite prepared at 300°C exhibited the excellent adsorption capacity and rapid equilibrium rate over a broad p H range for the removal of various pollutants. More importantly, the removal ratios of the composites toward Methyl Violet and tetracycline still remained 77.6% and 60.2% of the initial adsorption capacity after ten adsorption–regeneration cycles via a facile thermal regeneration strategy, respectively.Beyond all doubt, this research provided a feasible and economical way for the sustainable utilization of waste hot-pot oil in wastewater treatment, achieving the concept of disposal waste with waste and recycling.     

OBIA与RF结合的龙口市土地利用信息提取方法

为提高中分辨率遥感影像解译精度,本文提出面向对象影像分析（Object Based Image Analysis,OBIA）与随机森林（Random Forest,RF）结合的土地利用信息提取方法。采用Landsat 8 OLI影像,针对不同地物特点,阈值分割和多尺度分割结合创建影像对象,规则集和分类器协同分类,基于Relief F算法分别对光谱特征、纹理特征及所有特征降维筛选特征子集,并与全部特征一起应用RF建模,对龙口市进行土地利用信息提取与比较。结果表明：OBIA与RF结合提取土地利用信息,基于Relief F算法筛选纹理特征,保留完整光谱、几何、空间关系特征构建RF模型,建模错分率为0.0958,分类总体精度和Kappa系数分别为89.37%和0.872,取得较理想结果。该方法可应用于中分辨率遥感影像土地利用信息提取。     

Enzyme-electrolytic degradation of dichloromethane: Efficiency, kinetics and mechanism

Enzymatic electrolysis cell(EEC) has advantages over microbial electrolysis cell(MEC) due to the needless of microbe inoculation and high-efficiency of enzymatic reaction. In this study, an EEC was first applied to achieve the effective degradation of halogenated organic pollutants and dichloromethane(CH_2Cl_2) was utilized as a model pollutant. The results indicate that the degradation efficiency of CH_2Cl_2 after 2 hr reaction in the EEC was almost100%, which was significantly higher than that with enzyme(51.1%) or current(19.0%). The current induced the continuous regeneration of reduced glutathione(GSH), thus CH_2Cl_2 was degraded under the catalysis of GSH-dependent dehalogenase through stepwise dechlorination, and successively formed monochloromethane(CH_3Cl) and methane(CH_4). The kinetic result shows that with a current of 15 mA, the maximum specific degradation rate of CH_2Cl_2(3.77 × 10~(-3) hr~(-1)) was increased by 5.7 times. The optimum condition for CH_2Cl_2 dechlorination was also obtained with pH, current and temperature of 7.0, 15 mA and 35°C,respectively. Importantly, this study helps to understand the behavior of enzymes and the fate of halogenated organic pollutants with EEC, providing a possible treatment technology for halogenated organic pollutants.