毛细管气相色谱法分析1,3—丁二烯中炔烃杂质含量

介绍了一种毛细管毛相谱法测定１，３－丁烯中炔烃质含量的新试验方法，该方法以氮气为载气，采用氢火焰离子化检测器，样品经分离后，采用外标法定量，操作简便，准确。该方法还可用于１，３－丁二烯纯度分析 。     

Influence of chlorsulfuron herbicide on size of microbial biomass in the soil

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｕｓｅｏｆｃｈｅｍｉｃａｌｓ,ｉｎｃｌｕｄｉｎｇｐｅｓｔｉｃｉｄｅｓ,ｈａｓｂｅｃｏｍｅａｎｉｎｔｅｇｒａｌａｎｄｅｃｏｎｏｍｉｃａｌｌｙｅｓｓｅｎｔｉａｌｐａｒｔｏｆｍｏｄｅｒｎａｇｒｉｃｕｌｔｕｒｅ.Ｐｅｓｔｉｃｉｄｅ?..     

Methods for project-based mechanisms (JI/CDM)—relevance of IPCC inventory guidelines

A baseline for a project consists of estimates of annual emissions of greenhouse gases (GHG) for a given time period without implementing the project. A general three-step process for determining the baseline is suggested. The emission reduction of the project is given by the difference between the baseline and the monitored annual emissions. A preferred method, direct measurement of the emission reduction, is possible for some types of projects. Methods for estimating the annual baseline emissions are not necessary for the latter category, and a definition of this project category is suggested. IPCC Guidelines for National GHG Inventories categorise the emission sources so that only direct emissions from consumption of fuel and feedstock are calculated. There are thus no emission factors for indirect emissions (e.g. electricity consumption or km transported) or emission factors that depend on technology only, independent of consumption of fuel and feedstock. Technology-dependent emission factors may thus need to be developed for estimating indirect emissions and multi-project baselines. Consistency should be sought with the IPCC Guidelines when estimating annual baseline emissions and in monitoring project emissions to ensure comparability with the National Inventories.     

BOD测定中微生物传感器法与稀释接种法的比较

用微生物传感器快速法和稀释接种法对地表水和污水处理厂出水中的生化需氧量(BOD)进行了测定,用数理统计的方法对两种方法测定的结果进行了比较。     

多次相平衡/液上色谱法的原理与实验--水中挥发烃及其分配常数的测定

介绍了一次、二次及多次相平衡/液上色谱法测定水中有机挥发烃及其气液分配常数的理论关系式。给出分配常数倒数与定量分析误差存在线性关系;研究了温度、离子强度等因素对分配常数的影响。     

Enhanced cyanogen chloride formation after UV/PS and UV/H2O2 pre-oxidation and chlorination in natural river water

Ultraviolet/persulfate (UV/PS) and Ultraviolet/hydrogen peroxide (UV/H₂O₂) have attracted much attention in recent years as advanced oxidation processes for water treatment. However, it is not all clear how these two methods affect the formation of cyanogen chloride (CNCl) in the subsequent water chlorination process. In this study, it was found that both UV/H₂O₂ and UV/PS pre-oxidation promoted the formation of CNCl in six actual water samples collected from urban rivers. Glycine, uric acid, arginine and histidine were investigated as the model compounds to explore the effects of different methods on the production of CNCl. The results showed that compared with chlorination alone, pre-oxidation by UV/H₂O₂ and UV/PS can reduce the production of CNCl for glycine and uric acid by up to 95% during post-chlorination process. However, they can greatly promote the formation of CNCl for arginine and histidine by up to 120-fold. In a more detailed investigation, pre-oxidation of histidine formed highly reactive intermediates to chlorine, leading to increased CNCl formation and chlorine consumption. The results showed that the precursors of CNCl was altered after pre-oxidation, and need to be re-evaluated.     

油种指示物（指标）的研究

从油种、实验误差以及风化的影响对中国常见油种鉴别进行了探讨，确定了油种GC-FID指标物。结果表明，油种指示物在环境中保持着本身的一些固有特性，受实验误差和风化的影响较小。     

上海市在用车推行I/M制度中检测方法的研究

对在用车实施I/M制度，采用底盘测功机模拟道路工况检测汽车排放污染物，按美国国家环保局（EPA）推荐的方法有3种：瞬态短工总法（IM240）、稳态加速模拟工况法（ASM）和瞬态短工部简易质量分析检测法（VMAS）。根据上海市的试验结果，对上述3种方法的检测精度、设备投资以及运行维护诸方面进行分析比较，阐明上海市采用VMAS方法的依据和应注意的问题，并对应采用的模拟道路工况提出了看法。     

A／O-化学除磷工艺中DMBR动态膜成膜条件研究

根据动态膜原理，将0．1mm孔径无纺布为膜材的动态膜反应器（Dynamic Membrane BioReactor，DMBR）应用于A／O-化学除磷工艺之中，在动态膜反应器内完成泥水分离。试验测试了曝气强度、初始膜通量和污泥浓度对动态膜成膜的影响。结果表明，曝气强度和初始膜通量是影响成膜的关键性参数。当曝气强度≥60m^3／m^2·h或初始膜通量≥70L／m^2·h，2h内均不能形成截留性能良好的动态膜。在VSS／SS较低的污泥系统中，适宜的成膜条件为：曝气强度≤40m^3／m^2·h；初始膜通量≤40L/m^2·h。     

Au/ZnO催化剂的表征及常温常湿 条件下CO氧化性能研究

常温下考察了焙烧温度、金含量及水分对Au/ZnO催化剂上CO氧化性能的影响 ,并在常湿条件下考察了ZnO上CO氧化活性同温度的关系。结果表明 ,金的存在极大地提高了催化剂CO的氧化活性。另外焙烧温度和金含量对Au/ZnO催化剂的活性和稳定性均有较大影响 ,在常温常湿条件下 ,2 4 0℃焙烧的 2 %Au/ZnO催化剂 ,可连续反应 1 750h保持CO完全转化。XRD结果表明 ,锌的化学状态对催化剂的稳定性有较大的影响 ,氧化锌较碳酸锌表现出较高的稳定性。