废聚氨酯硬泡热处理特性及产物检测分析

利用热重分析仪和管式炉研究了废弃聚氨酯硬泡热处理特性并对热处理产物进行了检测分析。研究结果表明,废聚氨酯硬泡热处理过程呈单一剧烈失重峰,热失重主要发生在200～440℃之间,600℃热分解基本完成;FTIR谱图初步分析发现加热分解过程中有大量CO和CO2产生,且热处理过程中可能有O-H、C-H、C=O及带有苯环的物质生成。通过GC/MS检测分析结果显示热处理液体产物中检出多元醇以及苯胺、p-苯胺、苯甲腈等多种芳香类化合物,气体产物以低碳的烷烃和烯烃为主,可见FTIR和GC/MS分析结果有很好的一致性。研究结果显示,气体产物检测出有机氯化合物,这可能是聚氨酯硬泡生产过程中加入的氟利昂类发泡剂所致。     

Determination of trace amounts of chlorinated insecticides and fungicides in ginseng using capillary gas chromatography and ~(63)Ni electron capture detector

A method for the simultaneous determination of a series of chlorinated insecticides and fungicides as residues in ginseng is presented in this article. Pulverized samples are subjected to Soxhlet extraction with acetone-petroleum ether and the extract is partitioned between petroleum ether and aqueous sodium sulfate solution (2:98). The combined petroleum ether phase is cleaned up by sulfuric acid and analyzed by capillary gas chromatography using 63Ni electron capture detector. Recoveries from the different concentrations for 11 kinds of chlorinated insecticides and fungicides are between 92.40 and 103.7% with coefficients of variations ranged 1.22 and 9.53% without samples, and between 89.00% and 104.10% with coefficients of variations between 1.16% and 9.16% with samples. The detection limits are 0.2- 7.0 ng/kg.     

Determination of particulate polycyclic aromatic hydrocarbons in ambient air by gas chromatography-mass spectrometry after molecularly imprinted polymer extraction

A solid phase extraction procedure (SPE) is described for the quantitative analysis of polycyclic aromatic hydrocarbons (PAHs) in atmospheric particulate matter (PM), as ubiquitous environmental pollutants routinely measured in air quality monitoring. A SPE cartridge was used based on a molecular imprinted polymer (MIP-SPE) properly tailored for selective retention of PAHs with 4 and more benzene fused rings. The performance of the clean-up procedure was evaluated with the specific concern of selective purification towards saturated hydrocarbons, which are the PM components mostly interfering GC analysis of target PAHs. Under optimized operative conditions, the MIP-SPE provided analyte recovery close to 95% for heavier PAHs, from benzo(α)pyrene to benzo(ghi)perylene, and close to 90% for four benzene rings PAHs, with good reproducibility (RSDs: 2.5%-5.9%). Otherwise, C₁₇-C₃₂ n-alkanes were nearly completely removed. The proposed method was critically compared with Solid Phase Micro Extraction (SPME) using a polyacrylate fiber. Both methods were successfully applied to the analysis of ambient PM_2.5 samples collected at an urban polluted site. Between the two procedures, the MIP-SPE provided the highest recovery (R% ≥ 93%) for PAHs with 5 and more benzene rings, but lower for lighter PAHs. In contrast, SPME showed a mean acceptable R% value (∼ 80%) for all the investigated PAHs, except for the heaviest PAHs in the most polluted samples (R%: 110%-138%), suggesting an incomplete purification from the interfering n-hydrocarbons.     

Characterization of fine organic particulate matter from Chinese cooking

PM2.5 samples were collected by a three-stage cascade impactor at two kinds of Chinese restaurants to characterize fine organic particulate matter from Chinese cooking sources. Major individual organic compounds have been quantified by GC/MS, including series of alkanes, n-alkanoic acids, n-alkanals, alkan-2-0nes and PAHs.Alkanes and ketones make up a significant fraction of particle-phase organic compounds, ranging from C11 to C26,and (C9 to C19, respectively. In addition, other organic compound classes have been identified, such as alkanols,esters, furans, lactones, amides, and nitriles. The mass concentrations of fine particles, alkanes, n-alkanoic acids and PAHs in air emitted from the Uigur style cooking are hundreds times higher than ambient PM2.5in Beijing.     

柳州市大气颗粒物中多环芳烃的种类和时空分布特征及来源

采用气相色谱/质谱联用技术(GC/MS)检测了柳州市大气颗粒物样品中的PAHs,比较了柳州市各区大气颗粒物中多环芳烃含量的差异以及不同季节对多环芳烃含量的影响,讨论了其分布规律及污染源.     

GC/MS内标法测定土壤中多环芳烃的质量控制

阐述了GC/MS内标法测定土壤中多环芳烃时质量控制的基本内容、基本方法和基本操作。测定结果为：空白分析结果均小于检出限;空白加标精密度和准确度分别在7.80%~25.2%和49.2%~96.6%之间;样品加标精密度和准确度分别在7.77%~19.8%和67.2%~122%之间;检出限在0.05~0.08 mg/kg之间...     

固相微萃取-气相色谱法测定水中痕量甲萘威

建立了固相微萃取-气相色谱法测定水中痕量甲萘威的方法,并对固相微萃取条件进行了优化。结果显示,固相萃取的最佳条件为:水样pH值≤3,不添加无机盐,聚二甲基硅氧烷(PDMS,100μm)作为萃取纤维,萃取温度为80℃,萃取时间为30 min,解吸时间为90 s。优化后的方法,在甲萘威质量浓度0.01~1.0 mg/L范围内线性良好,相关系数为0.999 5,方法的精密度为1.9%,检出限为0.3μg/L,加标回收率为85.6%~92.4%,可满足地表水中甲萘威的测定要求。     

基质固相分散-快速溶剂萃取-GC/MS法同时测定土壤中有机氯农药和多环芳烃

建立了基质固相分散-ASE提取-GC/MS法同时测定土壤中8种有机氯农药和16种多环芳烃的方法。对方法的线性、检出限、精密度、回收率及土壤质控样品进行了分析,结果表明,8种有机氯农药和16种多环芳烃线性良好,相关系数为0.997 5～0.999 8,方法检出限为0.39～1.57μg/kg,空白加标样品的相对标准偏差小于20%,实际土壤样品加标回收率为60.6%～125%,土壤质控样品结果均在范围内。该方法能够满足土壤中8种有机氯农药和16种多环芳烃的检测要求。     

热脱附-GC/MS法测定垃圾填埋场周围空气中氯代烃

采用热脱附-冷阱捕集-GC/MS法测定垃圾填埋场周围空气中24种氯代烃,通过试验优化并确定热脱附质谱的最佳处理条件。方法在5.00 mg/L～100 mg/L范围内线性良好,24种氯代烃的方法检出限为0.060μg/m~3～0.200μg/m~3,测定下限为0.240μg/m~3～0.800μg/m~3。空白加标回收率为91.8%～110%,6次测定结果的RSD均5%。实际样品测定结果为0.112 mg/m~3～0.412 mg/m~3,表明离垃圾填埋场最近的居民区环境中氯代烃为未检出或痕量分布,对生命体危害极低。     

改进GC/FID法连续观测大气中CO浓度

改进装配有氢火焰离子化检测器(即FID)的气相色谱仪(GC),可连续监测大气中痕量气体CO浓度.本系统采用单阀双柱反吹进样技术,优选前置柱能更有效地剔除杂质,提高了分析柱效率,保持色谱基线平稳,提高分辨率和定量分析的准确率.优化后的气路设计与色谱柱的改进,使GC/FID对CO的最低检出限达到10×10-9、精密度误差小于2%,准确度在±2%之内.将气相色谱与动态气体稀释仪耦合使系统能够自动进行工作曲线校准,系统自动采样、分析和标定,无需人员职守.对北京大气CO连续观测结果表明,北京大气CO浓度变化受气象要素与排放源双重控制.