基于灰预测模型的大跨度预应力混凝土桥梁施工监测

运用灰色系统理论,建立大跨度预应力砼刚构-连续组合梁桥悬臂浇筑施工梁段立模标高预测的GM(1,1)模型,并用残差的GM(1,1)模型对其进行修正;同时把该预测模型应用于松原龙华松花江特大桥实际工程;其结果表明梁段立模标高预测精度较高,完全能够满足工程的需要,为同类桥梁的施工监测提供参考。     

Processing and Properties of Mixtures of PHB-V with Post-consumer LDPE

Mixtures of poly-β-(hydroxybutyrate-co-valerate) PHB-V with virgin and post-consumer low density polyethylene (LDPE) were prepared by melt mixing in proportions of 100/0, 90/10, 80/20, 70/30 and 0/100 (wt/wt%). The mixtures were analysed by infrared spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), melting flow index (MFI), tensile tests, scanning electron microscopy (SEM) and biodegradation in simulated soil. The DMTA and DSC curves of post-consumer LDPE suggested that this polymer was a mixture of LDPE and linear low density polyethylene (LLDPE). Virgin and post-consumer LDPE had lower MFI than PHB-V, but the blends showed higher index as the content of LDPE increased. The addition of LDPE reduced the tensile strength and Young’s modulus of the mixtures compared with PHB-V. SEM indicated poor interfacial adhesion between PHB-V and LDPE. PHB-V degraded slow and gradually, while both LDPE showed virtually no degradation under the conditions studied. The biodegradability of the blends depended on their composition and of the type of LDPE. LDPE improved the biodegradability of the mixtures.     

Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.

Identification of Odor Causing Compounds in a Commercial Dairy Farm

The odorous air emissions from confined animal feeding operations (CAFOs), such as swine, poultry and dairy farms, are increasingly raising community complaints. Odorous emissions can result in health damages, psychological discomforts and adverse aesthetic effects in the community. However, these emissions are not well characterized up to now due to the lack of legislation, the limitations in sampling and instrumentation techniques, and the complexity of the emissions themselves. This study is aimed at the development of a high volume sampler and sorbent assembly to identify the odor causing compounds from a diary CAFO. The sorbent was custom designed to target the potential compounds that may exist in a dairy farm and was validated in laboratory with a synthetic odor from the swine manure. The actual samples at the diary farm were collected in spring and summer of 2005. The sorbents were solvent extracted and individual odor compounds were identified using GC–MS (gas chromatography–mass spectroscopy). The data obtained indicated that high volume sampling can shorten the sampling time from days to within 4 h. Both volatile organic compounds (VOCs) and volatile fatty acids (VFAs) have been identified from the dairy farm, such as phenol, methylphenol, 4-ethyl phenol, indole, methyl indole, benzyl alcohol, hexanoic acid, valeric acid and iso-valeric acid, together with some nitrogen containing compounds that have not been reported before.     

气相色谱法测定废水和废气中N′,N-二甲基甲酰胺

以气相色谱石英毛细管柱分离、ＦＩＤ检测,测定废水和废气中Ｎ′,Ｎ－二甲基甲酰胺（ＤＭＦ）。在１０ｍｇ／Ｌ～１８８１０ｍｇ／Ｌ范围内有良好的线性关系。检测限：废水为０５ｍｇ／Ｌ;废气为０８ｍｇ／ｍ３。样品测定的相对标准差为４％～８％,回收率在７６％～１１２％之间,精密度和准确度均较好     

可持续发展的生态学思考

本文从生态学角度对可持续发展理论进行了思考。指出生态危机是可持续发展产生的基本背景;生态学中许多基本理论,如协调、适应、稳定、有序、循环再生及生态系统理论等,是可持续发展不断完善的理论基础;包括生态规划、生态技术与生态管理在内的广义生态工程,是实现可持续发展的有效途径     

不同热力背景对城市降雨（暴雨）的影响（Ⅰ）—降雨分布的空间差异

如何准确描述和预测降雨（暴雨）的空间分布,已成为城市减灾防灾的重要内容,本文探讨了利用热信息研究城市降雨空间分布差异的方法。在遥感、GIS技术支持下,利用对没的期夏、冬季热图像的主成分析和图像分割,将上海市1958－1998年热环境划分为自然、低温、高温3种不同的热力背景。在此基础上,就不同热力背景对城市降雨（暴雨）分布空间差异的影响规律进行了研究,为建立城市降雨空间差异预报模型奠定了基础。     

一个新的拓扑指数用于芳烃化合物溶解度、分配系数及生物毒性的研究

在分子拓扑理论的基础上,提出了一个新的拓扑指数Yx,并用Yx研究了芳烃化合物的溶解度、分配系数及生物毒(活）性,给出了相关方程。结果表明,新方法计算方便,物理意义明确,预测值与相应的实验值较吻合。     

海洋巨藻(Durvilaea potatorum)生物吸附剂对Hg~(2 )的吸附动力学研究

对经特殊的稳定化预处理所得的海洋巨藻 (Durvillaeapotatorum)生物吸附剂对Hg2 的吸附动力学进行了研究 ,报导了不同Hg2 初始浓度、温度以及生物吸附剂平均粒径下动态吸附量与时间的关系 .结果显示 ,各吸附动力学曲线呈优惠型 ;当生物吸附剂平均粒径为 0 .45mm时 ,Hg2 的半饱和时间tS均不超过 6 0min ;Hg2 初始浓度和生物吸附剂粒径越小 ,吸附温度越大 ,达到吸附平衡所需的时间越短 .在测试范围内 ,生物吸附剂的平衡吸附容量与粒径和温度无关 .同时考察了吸附过程中的传质效应并对液膜传质系数kL进行了关联 ,结果表明 :当吸附时间t≤tS时 ,Hg2 的吸附速率为液膜传质控制 ;在测试范围内 ,kL为 0 .0 40 7～ 0 .112cm/s.本研究结果为利用海洋巨藻 (Durvillaeapotatorum)生物吸附剂处理含汞废水的规模化应用提供了一定的依据 .图 5表 2参 11