基于Arcgis engine和Matlab的避难场所选址系统开发及应用

针对现有避难场所选址需要多种工具配合、操作步骤繁杂和工作量大的问题,开发了基于Arcgis engine和Matlab的避难场所选址系统。通过Arcgis engine实现避难场所选址所需的定制系统界面、空间数据管理、最短路径分析、缓冲区分析和voronoi图分析等GIS功能。通过Matlab构建多目标加权灰靶决策法和熵值权重法模型,实现避难场所选址功能。应用COM组件技术实现Arcgis Engine和matlab的集成。以泉州市中心城区为例,应用该系统进行应急避难场所选址决策分析。结果表明,该系统可以满足泉州市的应急避难场所选址及布局分析需求。     

CeO_2-TiO_2复合纳米纤维光催化降解醛酮类污染物的研究

采用同轴静电纺丝法制备了CeO2-TiO2复合纳米纤维,并用X射线衍射仪、扫描电子显微镜、程序升温脱附仪和紫外-可见光谱能谱(UVVis)仪表征了CeO2-TiO2纳米纤维的相组成和微观形貌,分析了CeO2-TiO2纳米纤维对醛酮的吸附强度与光电化学特性.同时,研究了CeO2配比量、光源条件和重复使用性对降解甲醛污染物的影响规律.结果表明,CeO2质量配比为50%的CeO2-TiO2催化剂对甲醛降解效率最高;在无光和可见光条件下,CeO2-TiO2催化剂对甲醛的降解效率分别为13.5%和25.3%,在紫外光下CeO2-TiO2催化剂对甲醛的降解效率为92.5%;随着光催化循环次数的增加,可见光下CeO2-TiO2催化剂对甲醛的降解效率逐渐增高,紫外光下CeO2-TiO2催化剂对甲醛的降解效率维持在92.5%左右.利用催化剂样品CT50对柴油机尾气中醛酮类排放污染物进行光催化降解的应用发现,CeO2-TiO2催化剂对醛类污染物的降解效率为85.4%,酮类污染物的降解效率为81.3%,苯甲醛和甲基苯甲醛的降解效率分别为80.4%和80.3%.表明CeO2-TiO2催化剂具有较强的光催化降解醛酮类污染物的能力.     

MMT对GDI、PFI汽油机微粒排放的影响

为研究MMT对GDI、PFI汽油机微粒排放数量浓度以及质量浓度的影响,利用DMS500快速型微粒光谱仪,对一台增压缸内直喷(GDI)汽油机和一台自然吸气式气道喷射(PFI)汽油机燃用基础油以及在基础油中添加有机锰(MMT)的燃油的微粒排放特性进行了试验研究.结果表明:MMT的添加均会增加GDI、PFI汽油机的微粒排放,燃用不同含Mn量的燃油,各负荷下GDI汽油机的微粒数量浓度均明显高于PFI汽油机.中小负荷下GDI、PFI汽油机微粒排放数量浓度以及质量浓度均随着Mn含量的增加而上升.大负荷下,PFI汽油机微粒数量浓度随着Mn含量的增加而上升,但GDI汽油机则是在燃用不含Mn的燃油时微粒数量浓度最低,而后随着燃油中Mn含量的增加,超细微粒数量浓度的峰值反而逐步降低.GDI、PFI汽油机核模态与积聚模态微粒数量变化的规律相似.     

DME简化反应模型及其在HCCI燃烧分析中的应用研究

提出了一个可应用于HCCI发动机工作过程研究的DME化学反应动力学简化模型,该模型由28种组分、38个基元反应组成,包括3个子模型,即低温反应和负温度系数区子模型、高温裂解和高温氧化子模型以及甲酸生成过程子模型.通过算例对比分析,该DME简化模型能正确揭示DME燃烧过程主要生成物组分的变化规律,能准确计算DME燃烧过程低温和高温阶段的放热特征时刻,其计算结果与详细机理计算结果吻合.相对于详细机理,简化模型节省了计算时间,为实现化学反应动力学与CFD多维模型耦合的燃烧计算提供了一个可行而有效的途径.     

Performance Enhancement of a Beta Type Rhombic Drive Stirling engine

ABSTRACT

Stirling engines maintain attraction because of their high energy conversion efficiencies. In this study, experimental comparison of a beta-type Stirling engine for two different rhombic-drive mechanisms was presented. In one of the rhombic mechanisms, spur gears were used and the gear shaft was supported in bearings from one side. In the other mechanism, two helical gears were placed on crankshafts and the crankshafts were supported in bearings from both sides. Rhombus lengths of the mechanisms were determined as 66 mm and 80 mm to provide same constant compression ratio of 2.5 for both configurations. Both mechanisms were used in the same beta-type Stirling engine having same cylinder, piston and displacer dimensions. Performance parameters of the engines were evaluated at different helium charge pressures (2–4 bar) and hot-end temperatures (400–600°C). The hot-end of the displacer cylinder was heated by a liquefied petroleum gas (LPG) burner. The engine power increased by 132%, friction losses and gear noses were reduced by supporting the rhombic-drive mechanism from both side and using helical gears. The maximum output torque and power of the engine were obtained as 13.14 Nm at 428 rpm engine speed and 663 W at 800 rpm engine speed, respectively, at 600°C hot-end temperature and 4 bar charge pressure.     

涡轴发动机燃气涡轮叶片热腐蚀机理分析与改进

目的 提高航空发动机燃气涡轮工作叶片的结构完整性、安全性和可靠性。方法 以某型涡轴发动机燃气涡轮转子叶片热腐蚀案例为研究对象,详细阐述热腐蚀下燃气涡轮转子叶片的结构破坏形式,分析发生热腐蚀部位的分布规律。通过冶金分析方法,研究燃气涡轮转子叶片的热腐蚀-疲劳失效形式。结果 燃气涡轮叶片高摩擦系数的区域在高温燃气的冲刷效应以及热盐腐蚀的作用下,发生表面涂层腐蚀剥落。涂层腐蚀剥落部分的叶片合金基体受到高温燃气的氧化与侵蚀后,形成了热腐蚀坑。腐蚀坑表面的凹凸处出现应力集中,并萌生裂纹,最终引起叶片疲劳断裂。结论 探究了典型腐蚀性物质对燃气涡轮转子叶片的耐高温涂层与镍基合金基体侵蚀与氧化的化学本质,最后针对燃气涡轮转子叶片热腐蚀问题提出了改进建议,可对防范航空涡轴发动机热腐蚀问题提供有益参考。     

发动机典型寿命敏感件环境谱加速技术研究现状

对发动机寿命敏感件环境谱加速技术的研究现状进行分析。从加速环境谱的编制原则、编制方法以及当量关系的确定和验证等方面,详细介绍了加速环境谱的概念内涵。发动机的使用寿命主要受金属敏感件的腐蚀和非金属敏感件的老化制约,重点从常规加速腐蚀试验、多因素综合腐蚀试验和高温加速腐蚀试验等3个方面阐述了加速腐蚀试验方法。从液体介质老化、热氧老化、综合环境老化等方面介绍了以橡胶为代表的非金属加速老化试验方法。最后指出目前当量关系确定方法的局限性和多因素综合模拟方法研究方面的欠缺,提出应综合材料、腐蚀、力学、环境等多学科的相关理论和实践,制定更加科学合理的当量关系确定方法,以及注重新型试验设备的研发等建议。     

怠速工况下汽车使用乙醇汽油排放污染物的变化

对怠速工况下使用乙醇汽油汽车尾气中污染物进行了检测.结果表明,使用乙醇汽油后,汽车尾气中CO和HC浓度明显降低,平均下降率为56.9%和38.2%;NOx平均下降率为15.0%;CO2浓度平均增长率为5.04%;苯系物浓度明显降低,平均下降率在45.5%～53.1%;醛类的浓度增加明显,平均增长率在47.8%～293%;丙酮、丁酮的浓度增加,分别为16.6%和25.3%.     

Isolation and identification of potential fungal species for spent engine lubrication oil remediation in Peninsular Malaysia

Improper disposal and spills of spent engine oil into the environment can result in contamination, which eventually affects humans through the food chain. Mycoremediation is an effective and inexpensive alternative to clean up spent engine oil contamination. In recent work, the potential effectiveness of fungi for degrading spent engine oil was confirmed, with the species identified through molecular identification. Fungi that were able to grow in Bushnell Haas Broth supplied with spent engine oil were identified with the potential to utilize spent engine oil as a carbon source. Six species of fungi namely Penicillium simplicissimum, Aspergillus nidulans, Aspergillus niger, Trichoderma longibrachiatum, Aspergillus ustus, and Aspergillus flavus were successfully identified in this study. Over a course of seven days, P. simplicissimum (21.11 percent) was identified as the most effective fungi in degrading spent engine oil, followed by A. nidulans (17.75 percent), A. niger (15.85 percent), T. longibrachiatum (15.12 percent), A. ustus (15.02 percent), and A. flavus (11.80 percent). As these species of fungi were isolated from the natural environment in Peninsular Malaysia, the potential of using these fungi as mycoremediation of spent engine oil was therefore confirmed.     

Assessment of thermodynamics performance with sustainable propulsion indicators of a seaplane engine for different temperatures in the same altitude

Seaplanes have become an important tool along with rapidly developing technology in modern transportation for many countries related to sea. Considering the environmental evaluation for these aircraft, decreasing fossil fuels consumption and energy efficiency are important points for sustainability. For this purpose, in this study, first, the energy and exergy analyses based on the real data of a turboprop engine used in seaplane taken as the reference were performed. Then, new indicators developed for the sustainable propulsion index were examined and evaluated separately. The analyses were made for an altitude of 9000 ft and three different dead state temperatures of ?33°C, ?3°C, and 27°C. According to the analyses, while the average energy efficiencies were found to be 34.7%, 37.8%, and 40.7%, the average exergy efficiencies were found to be 19.24%, 21.25%, and 23.20%, respectively. In addition, the improvement potential due to irreversibility and entropy production for each case was also calculated and the results of the sustainable emission index were found to be very low. At the end of the study, the results were evaluated and some suggestions for the effective use of energy in the seaplanes were made.