古堆泉域岩溶地下水水化学特征及成因

古堆泉为山西省著名岩溶大泉之一,是唯一的中低温温泉,具有悠久的开发观赏历史,凝聚着丰厚的人文积淀.以古堆泉域岩溶地下水为研究对象,通过系统地样品采集与同位素分析,综合运用水化学（Durov图、离子比例、Gibbs图和氢氧同位素）同位素方法分析地下水水化学特征和地下水系统径流特征.古堆泉域岩溶地下水的⁸⁷ Sr/⁸⁶ Sr值在0.709~0.717之间,Mg/（Mg+Ca）值在0.27~0.74之间.通过分析Sr同位素组成和Mg/（Mg+Ca）、1/Sr变化特征,得出古堆泉域岩溶地下水为深部热水与浅部冷水的混合水,中条山南梁泉岩溶水子系统呈现碳酸盐岩地层径流特征,佛岭山-高显海头泉岩溶水子系统和侯马盆地深循环子系统呈现碳酸盐岩地层与火成岩地层径流特征,塔儿山-九原山古堆泉岩溶水子系统呈现碳酸盐岩地层与古老硅铝质岩地层径流特征.通过2014年样品与2021年相同位置取样点的氢氧同位素比对分析,得出古堆泉口水样变化原因是其受三泉水库补给随时间的积累的结果,三泉水库的变化原因是受引黄水的影响.研究区岩溶地下水水化学类型可分为SO₄-Na、SO₄-Ca、HCO₃-Na、HCO₃-Mg、HCO₃-Ca和Cl-Na型.岩溶地下水水化学类型从HCO₃-Ca·Mg→HCO₃·SO₄-Ca·Mg→SO₄·HCO₃-Na·Ca→SO₄·Cl-Na·Ca呈现明显的水化学成分分带.     

草原流域地下水化学时空特征及环境驱动因素——以内蒙古巴拉格尔河流域为例

为查明内蒙古草原流域地下水水化学特征、成因及其环境意义,选择巴拉格尔河流域为研究对象,以Piper三线图、Gibbs图、主成分分析法（PCA）和内梅罗指数法等对2018~2019年丰水期、枯水期46处92个浅层地下水水样进行分析.结果表明：研究区地下水呈现弱碱性环境,属于淡水,枯水期多数离子含量高于丰水期,空间分布整体呈现出西高东低的特点;地下水水化学类型多样,以HCO₃^–-Ca²⁺·Na⁺型占主导,HCO₃^–-Ca²⁺型、HCO₃^–--Ca²⁺·Mg²⁺型、HCO₃^–-Na⁺型和HCO₃^–-Ca²⁺·Na⁺·Mg²⁺型等多种共存;不同河段枯水期水化学差异不显著,但丰水期地下水离子具空间特征,地下水化学成分来源变化复杂;地下水化学离子主要受岩石风化作用控制,Ca²⁺、Mg²⁺主要来源于碳酸盐、硅酸盐和蒸发岩的溶解,其中碳酸盐占主导,Na⁺、K⁺来自岩盐的溶解;地下水级别较好水居多,其次为较差和良好,极差、优良水占比最小,总体水质偏好;碳酸盐岩石风化、水岩溶滤作用和人类活动是研究区地下水化学特征演化的主要驱动因素.研究成果可为区域草原生态环境保护与恢复、水资源开发利用及流域生态水文研究提供技术参考与依据.     

Co-solvent selection and recovery

The selection and recovery of two or more solvents (i.e. co-solvents) are studied because of their importance in environmentally responsible processing. A particularly challenging problem arises when the contaminants (or solutes) are comprised of a mixture of volatile and nonvolatile compounds. The nonvolatile components present difficulties in solvent selection while the volatile components give rise to solvent recovery challenges. Traditional approaches such as the Kauri-Butanol test and predictions based on solubility parameters from regular solution theory can result in poor solvent selection when some of the contaminants are nonvolatile. A simple, graphical and rigorous procedure based on Gibbs energies of mixing for all binary mixtures of solvents and contaminants is proposed for choosing solvent/contaminant pairs. This selection procedure is based on the choice of solvent resulting in the lowest solvent/contaminant Gibbs free energy of mixing for a given contaminant. Nonvolatile contaminants are often easily separated in a single-stage flash vessel. Volatile contaminants, on the other hand, can form homogeneous or heterogeneous azeotropes with commonly used solvents, give rise to distillation boundaries and result in a challenging co-solvent recovery problem. A systematic procedure for the synthesis, design and economic analysis for co-solvent recovery is presented. Residue curve maps are used to identify distillation boundaries and to generate a conceptual process flow sheet for co-solvent recovery. Equipment sizes for the separators and auxiliaries (i.e. condensers, reboilers, decanters, etc.) are determined and capital investment, installation and operating costs are calculated. The removal of oil-water emulsions from the surface of machined metal parts using n-propyl bromide (NPB) and isopropyl alcohol (IPA) in a closed-loop degreaser is used to illustrate the proposed methodology of co-solvent selection and recovery. Analysis shows that the Kauri-Butanol test and the use of solubility parameters can result in poor solvent selection. In contrast, the proposed methodology shows that NPB is competitive with banned solvents like chlorodifluoro, fluorodichloroethane and trichloroethane and highly regulated solvents such as perchloroethylene, trichloroethylene and is a good solvent for the removal of machining oils while IPA is a good solvent for removing water. Separation of mixtures of NPB/IPA/water is difficult because of the presence of three binary and one ternary azeotrope that create three distinct distillation regions as well as regions of vapor-liquid-liquid behavior. It is shown that these distillation boundaries preclude direct water separation and that a two-distillation sequence with decantation is required to cross boundaries and recover both solvents. A variety of geometric illustrations are presented to elucidate key concepts.     

Adding virtual measuring stations to a network for urban air pollution mapping

Maps of pollutants concentration are usually generated by means of interpolation and extrapolation methods. The quality of the results depends mainly of the number of permanent or temporary measuring stations. This paper deals with a method for the virtual densification of the network of stations. The method creates "virtual measuring stations". It aims at improving the quality of interpolation by increasing the number of data on pollutant concentration. The virtual stations are determined by the means of a classification method applied to each pixel of the area under concern. Discriminating elements are pollutants emission classes, land cover types, urban morphological indicators created to this purpose and distance to major roads. A first implementation was made for particulate matter (PM) for the city of Strasbourg (France) using thin-plates spline interpolation method in Arcview 9 GIS. The relative Root Mean Square Error decreases from 49% for five input stations down to 15% for the virtual stations.     

Loft features reveal the functioning of the young pigeon’s navigational system

It is thought that young homing pigeons are able to use information acquired en route for their initial homeward orientation. However, the cues involved and mechanisms utilised are under discussion. Blocking light-dependent route-specific information during the first leg of an outward journey detour, together with analysis of pigeons that were raised under different loft conditions, allowed us to correctly evaluate the functioning of this mechanism and, more generally, the navigational map of birds. Pigeons from the same stock were raised and kept in two different lofts. The birds in the experimental groups were transported to the release sites via detours, and light-dependent information was denied during the first half of the outward journey (no compass information was available). Control birds were transported by the most direct route and had access to all available information. In general, the results showed that the low-loft birds preferred to use magnetic compass cues, whereas the high-loft birds preferred to use navigational map cues to collect information of the first part of the outward journey. The impairments observed in the homing performances of the experimental groups highlight the reliability of information collected inside the map area. Relevant to an understanding of the route-reversal mechanism was the evidence that this mechanism is able to function in the absence of compass information (birds raised in a wind-exposed loft show a detour effect). In systems where directional information could be provided by multiple sources, processing and extracting accurate course trajectories through a common mechanism may prove more efficient and reliable.     

用于湿法净化黑烟表面活性剂筛选的数学模型研究

湿法净化燃煤窑炉中的黑烟,关键在于表面活性剂对炭黑的润湿、增溶和降低表面张力作用.根据研究筛选的数学模型,计算AEO-9和SDBS混合表面活性剂溶液的亲水亲油平衡值HLB、临界胶束浓度CMC与胶束形成吉布斯自由能ΔG0mf.通过实验测得不同配比AEO-9和SDBS溶液的CMC和处于该CMC时黑烟的去除效率η,分析混合溶液中HLB、CMC、ΔG0mf与η的关系,建立新的数学模型.结果表明,理论CMC与实测CMC吻合度较好;HLB与ln[CMC]线性相关;ΔG0mf与η存在二次函数关系.降低CMC可以有效增大HLB,增加溶解度,减小形成胶束的吉布斯自由能,降低表面张力,使形成胶束的反应更容易自发进行,有效提高黑烟去除效率.     

基于ArcGIS Server ADF的流域水环境专题图研究

专题地图是流域水环境信息的良好表达形式和信息载体,文章运用地理信息系统二次开发软件-ArcGIS Server ADF研究并实现水环境专题图展示功能。通过流域水环境信息专题地图可以表达水环境监测评价结果,能将水环境质量的空间规律直观显示,实现水环境质量评价信息的可视化,并表示其动态变化和发展趋势,揭示发展规律,以供有关专家、决策者获取各类重要信息,进行环保政策的研究分析和决策。     

基于C#与Surfer Automation完成大气污染扩散等值线自动化生成

等值线图绘制是大气扩散研究工作中的一项重要内容。基于C#编程技术,通过Surfer Active X Automation接口技术,在程序中实现了对Surfer等值线图绘制各方法和属性的调用,完成了等值线图的程序化批量绘制,并应用此技术实现了大气污染扩散的动态演示。该技术的运用使得大批量规格化绘制等值线图、向量图等变得简单易行,有助于提高研究人员的工作效率。     

广州市道路交通噪声地图的绘制

基于速度-密度关系模型,由浮动车速推算出广州市路网的交通流量,并从地理信息系统(GIS)加载道路及建筑物的属性信息作为噪声计算的输入参数;然后结合单车辆噪声排放模型及噪声传播扩散的基本原理,考虑城市建筑物群对交通噪声的遮挡衰减,建立了城市尺度的交通噪声计算模型,计算出了广州市的交通噪声值,并绘制出了广州市的交通噪声地图,结果可为广州市交通噪声污染的控制提供科学参考依据。     

基于大比例尺地形图的抗震规划工作底图缩编研究

工作底图的编制是开展抗震规划的基础工作之一,好的工作底图不仅能突出抗震规划专题信息,更有利于规划成果的应用。本文以1∶5 000地形图缩编成1∶5万抗震规划工作底图为例,分析了规划底图缩编过程中存在的问题,探索了基于AutoCAD、南方Cass软件以及Arcgis的缩编方法,从而有效提高抗震规划的工作效率。