Study on the hydrolysis/precipitation behavior of Keggin Al13 and Al30 polymers in polyaluminum solutions

The hydrolysis/precipitation behaviors of Al³⁺, Al₁₃ and Al₃₀ under conditions typical for flocculation in water treatment were investigated by studying the particulates' size development, charge characteristics, chemical species and speciation transformation of coagulant hydrolysis precipitates. The optimal pH conditions for hydrolysis precipitates formation for AlCl₃, PAC_Al13 and PAC_Al30 were 6.5–7.5, 8.5–9.5, and 7.5–9.5, respectively. The precipitates' formation rate increased with the increase in dosage, and the relative rates were AlCl₃ ? PAC_Al30 > PAC_Al13. The precipitates' size increased when the dosage increased from 50 μM to 200 μM, but it decreased when the dosage increased to 800 μM. The Zeta potential of coagulant hydrolysis precipitates decreased with the increase in pH for the three coagulants. The iso-electric points of the freshly formed precipitates for AlCl₃, PAC_Al13 and PAC_Al30 were 7.3, 9.6 and 9.2, respectively. The Zeta potentials of AlCl₃ hydrolysis precipitates were lower than those of PAC_Al13 and PAC_Al30 when pH > 5.0. The Zeta potential of PAC_Al30 hydrolysis precipitates was higher than that of PAC_Al13 at the acidic side, but lower at the alkaline side. The dosage had no obvious effect on the Zeta potential of hydrolysis precipitates under fixed pH conditions. The increase in Zeta potential with the increase in dosage under uncontrolled pH conditions was due to the pH depression caused by coagulant addition. Al–Ferron research indicated that the hydrolysis precipitates of AlCl₃ were composed of amorphous Al(OH)₃ precipitates, but those of PAC_Al13 and PAC_Al30 were composed of aggregates of Al₁₃ and Al₃₀, respectively. Al³⁺ was the most un-stable species in coagulants, and its hydrolysis was remarkably influenced by solution pH. Al₁₃ and Al₃₀ species were very stable, and solution pH and aging had little effect on the chemical species of their hydrolysis products. The research method involving coagulant hydrolysis precipitates based on Al–Ferron reaction kinetics was studied in detail. The Al species classification based on complex reaction kinetic of hydrolysis precipitates and Ferron reagent was different from that measured in a conventional coagulant assay using the Al–Ferron method. The chemical composition of Al_a, Al_b and Al_c depended on coagulant and solution pH. The Al_b measured in the current case was different from Keggin Al₁₃, and the high Al_b content in the AlCl₃ hydrolysis precipitates could not used as testimony that most of the Al³⁺ was converted to highly charged Al₁₃ species during AlCl₃ coagulation.     

Scaling range sizes to threats for robust predictions of risks to biodiversity

Assessments of risk to biodiversity often rely on spatial distributions of species and ecosystems. Range‐size metrics used extensively in these assessments, such as area of occupancy (AOO), are sensitive to measurement scale, prompting proposals to measure them at finer scales or at different scales based on the shape of the distribution or ecological characteristics of the biota. Despite its dominant role in red‐list assessments for decades, appropriate spatial scales of AOO for predicting risks of species’ extinction or ecosystem collapse remain untested and contentious. There are no quantitative evaluations of the scale‐sensitivity of AOO as a predictor of risks, the relationship between optimal AOO scale and threat scale, or the effect of grid uncertainty. We used stochastic simulation models to explore risks to ecosystems and species with clustered, dispersed, and linear distribution patterns subject to regimes of threat events with different frequency and spatial extent. Area of occupancy was an accurate predictor of risk (0.81<|r|<0.98) and performed optimally when measured with grid cells 0.1–1.0 times the largest plausible area threatened by an event. Contrary to previous assertions, estimates of AOO at these relatively coarse scales were better predictors of risk than finer‐scale estimates of AOO (e.g., when measurement cells are <1% of the area of the largest threat). The optimal scale depended on the spatial scales of threats more than the shape or size of biotic distributions. Although we found appreciable potential for grid‐measurement errors, current IUCN guidelines for estimating AOO neutralize geometric uncertainty and incorporate effective scaling procedures for assessing risks posed by landscape‐scale threats to species and ecosystems.     

腐蚀对30CrMnSiNi2A钢结构疲劳寿命的影响

采用周期浸润加速腐蚀试验与疲劳试验相结合的方法,研究了腐蚀及腐蚀与疲劳交替作用对某型飞机30CrMnSiNi2A机翼主梁疲劳寿命的影响.结果表明,腐蚀环境的影响会引起30CrMnSiNi2A高强度结构钢的疲劳寿命明显降低.与未腐蚀状态相比,预腐蚀5、10、15天后,某型飞机机翼主梁模拟件的平均疲劳寿命分别下降了17.3%、20.5%、33.2%;而在腐蚀与疲劳交替作用下,其平均疲劳寿命下降了22.8%.在给定的腐蚀环境和疲劳载荷谱作用下,平均疲劳寿命N50随预腐蚀时间t的变化可以用N50=1044.541-219.978t描述.     

Fluid30单元在同轴圆柱壳固有特性计算中的适用性分析

目的分析Fluid30单元用于内侧含环形间隙流体同轴圆柱壳固有特性计算的适用性。方法针对内侧含环形间隙流体的同轴圆柱壳模型,分别基于"Fluid30单元"和"理论流体附加质量"对壳体固有特性进行分析。通过变间隙宽度对比计算,探究壳体固有特性随无量纲半径比的变化规律,分析波动方程离散化对计算结果的影响,判定Fluid30单元的适用范围。结果半径比与固有频率之间呈非线性关系,半径比越小,壳体固有频率越低,固有频率随半径比变化率越大。波动方程离散化引起的误差随半径比减小而增大,以相对误差10%作为Fluid30单元适用性判别标准,(1,2)壳式频率对应的临界半径比为1.20,(1,3)壳式频率对应的临界半径比为1.03,其他壳式频率对应的临界半径比小于1.001。结论不同阶频率的Fluid30单元适用范围不同,当半径比小于临界值时,相关频率应基于理论流体附加质量迭代计算。     

Considering connections between Hollywood and biodiversity conservation

Cinema offers a substantial opportunity to share messages with a wide audience. However, there is little research or evidence about the potential benefits and risks of cinema for conservation. Given their global reach, cinematic representations could be important in raising awareness of conservation issues and species of concern, as well as encouraging greater audience engagement due to their heightened emotional impact on viewers. Yet there are also risks associated with increased exposure, including heightened visitor pressure to environmentally sensitive areas or changes to consumer demand for endangered species. Conservationists can better understand and engage with the film industry by studying the impact of movies on audience awareness and behavior, identifying measurable impacts on conservation outcomes, and engaging directly with the movie industry, for example, in an advisory capacity. This improved understanding and engagement can harness the industry's potential to enhance the positive impacts of movies featuring species, sites, and issues of conservation concern and to mitigate any negative effects. A robust evidence base for evaluating and planning these engagements, and for informing related policy and management decisions, needs to be built.     

Exceptional responders in conservation

Conservation operates within complex systems with incomplete knowledge of the system and the interventions utilized. This frequently results in the inability to find generally applicable methods to alleviate threats to Earth's vanishing wildlife. One approach used in medicine and the social sciences has been to develop a deeper understanding of positive outliers. Where such outliers share similar characteristics, they may be considered exceptional responders. We devised a 4‐step framework for identifying exceptional responders in conservation: identification of the study system, identification of the response structure, identification of the threshold for exceptionalism, and identification of commonalities among outliers. Evaluation of exceptional responders provides additional information that is often ignored in randomized controlled trials and before–after control‐intervention experiments. Interrogating the contextual factors that contribute to an exceptional outcome allow exceptional responders to become valuable pieces of information leading to unexpected discoveries and novel hypotheses.     

The time dimension and lithium resource constraints for electric vehicles

The availability of lithium resources for a transition to electric vehicles is a vital topic for transport technology strategy. Recent debate seems to have concluded that there is ‘sufficient’ lithium available, but for the purposes of a technological transition, time matters. It is not simply the quantity of resource that is relevant—the flow rate into society may be a much more difficult constraint and transient events have disrupted heavily concentrated material supply chains in the past. Furthermore, critical assumptions such as the presence of recycling systems may not be justified without policy support. Complacency is therefore not an appropriate stance for a robust evaluation of material risks in the case of lithium.     

Social dimensions of mining: Research,policy and practice challenges for the minerals industry in Australia

The social dimensions of the mining industry are increasingly acknowledged as critical to business success, yet remain the least understood aspect of the business concept of sustainable development—the ‘triple bottom line’ of economy, environment and society.     

On technical change in the elasticities of resource inputs

This article analyses growth of an economy where the substitutability between non-renewable and renewable resource inputs changes over time. We allow for exogenous technical change in the elasticity of substitution (EoS) between these two types of resources as well as for biased factor-augmenting technical change. Our main results are: (1) sustained technical change in the EoS is enough to overcome resource constraints; (2) productivity-enhancing technical change is most beneficial when directed to the resource which is currently most important for production; (3) the speed of productivity-enhancing technical change is crucial for its usefulness to overcome resource constraints; (4) sustainability depends critically on the type of technical change.     

Adapting the bioblitz to meet conservation needs

When conservation strategies require new, field‐based information, practitioners must find the best ways to rapidly deliver high‐quality survey data. To address this challenge, several rapid‐assessment approaches have been developed since the early 1990s. These typically involve large areas, take many months to complete, and are not appropriate when conservation‐relevant survey data are urgently needed for a specific locale. In contrast, bioblitzes are designed for quick collection of site‐specific survey data. Although bioblitzes are commonly used to achieve educational or public‐engagement goals, conservation practitioners are increasingly using a modified bioblitz approach to generate conservation‐relevant data while simultaneously enhancing research capacity and building working partnerships focused on conservation concerns. We term these modified events expert bioblitzes. Several expert bioblitzes have taken place on lands of conservation concern in Southern California and have involved collaborative efforts of government agencies, nonprofit organizations, botanic gardens, museums, and universities. The results of expert bioblitzes directly informed on‐the‐ground conservation and decision‐making; increased capacity for rapid deployment of expert bioblitzes in the future; and fostered collaboration and communication among taxonomically and institutionally diverse experts. As research and conservation funding becomes increasingly scarce, expert bioblitzes can play an increasingly important role in biodiversity conservation.