氧化铝皮带廊粉尘浓度超标原因及对策

分析了山西铝厂氧化铝皮带廓技术改造以后粉尘浓度超标的原因，提出了降低粉尘浓度的对策。     

South African gold mining taxation : An example of a resource rent tax

Theoretically, a resource rent tax is neutral in that it does not influence the allocation of resources. However, the application of such fundamental principles in the tax formula of the South African gold mining industry negates the neutrality principle. A progressive element in the tax rate encourages mining of submarginal ores - leads to misallocation of resources. However, it substantially reduces the financial risks of a mining company engaged in the extraction of a commodity characterized by price volability, such as gold, and permits economies of scale in mining and encourages conservation of a non-renewable resource. As long as prices increase faster than costs, the advantages of this system probably exceed the disadvantages. The choice of the threshold rate in such a tax system is critical. If it is too high it will encourage mining of submarginal ores, and if too low it does not recognize the peculiar risks of gold mining investments.     

Ignition tests for electrical and mechanical equipment subjected to hot surfaces

This paper reports some experimental work on hot surface ignition temperatures of dust deposits. Dust layers up to 75 mm in depth were ignited using a modified version of the standard 5 mm layer apparatus. The measured ignition temperatures show good agreement with predictions using the method given in EN 50281-2-1. Ignition temperatures of conical dust deposits over an electrically heated box were not predictable, but were not too dissimilar from the ignition temperatures of the thick layers. Both tests gave adequate reproducibility in round robin tests. Rotating steel wheels in contact, immersed in a dust deposit produce the frictional hot surfaces. A relation between the power lost by friction and the surface temperature developed has been derived. The surface temperatures leading to ignition were close to the ignition temperatures for the conical deposits on the heated box. The similarities between the ignition temperatures of dust deposits in several configurations indicate that a simple test for ignition temperature measurement could have wide application in dusty environments.     

黄金采选业污染防治成功案例研究

河南金源公司祁雨沟金矿在新技术改造项目中引进了清洁生产工艺,可节约生产用水资金,提高劳动生产效率;减排生产废水和污染物等,实现经济和环境效益双赢。     

浙江青田石平川钾长花岗岩特征及其成因探讨

青田县石平川钼矿床是浙江省现已发现的规模最大的钼矿床,多数人认为石平川钼矿床的形成与钾长花岗岩有密切关系.本文主要从岩相学、岩石地球化学、LA-ICPMS锆石U-Pb年代学等方面研究石平川钾长花岗岩,并探讨其成岩环境及成因.研究表明,石平川岩体属于高钾钙碱性、弱过铝质S型花岗岩,其形成于早白垩世晚期挤压环境,源岩物质主要是壳源,并有少部分幔源物质成分参与.     

康滇地轴东缘典型铅锌矿床伴生分散元素镉锗镓赋存状态与富集规律研究

分散元素在自然界含量很低,以分散状态存在,很少形成独立矿物和独立矿床,因此对矿床中伴生分散元素研究有重要的理论和现实意义。本次工作通过解剖康滇地轴东缘典型铅锌矿床——四川天宝山、四川大梁子和云南会泽,利用常规显微镜观察、电子探针分析和等离子质谱分析手段,分析研究了矿床中矿物和矿石中的分散元素镉锗镓赋存状态和富集规律,总结了分散元素镉锗镓的空间分布规律:由西向东,即自天宝山到大梁子到会泽,分散元素镉锗镓的含量有富镉-富镉镓-富锗的变化规律。     

巷道内粉尘二次飞扬规律的数值模拟研究

针对巷道中沉积粉尘二次飞扬的现象,利用数值模拟的方法对粉尘二次飞扬进行了研究,分析了巷道内粉尘二次飞扬的极限风速与扬尘粒径之间的关系,从而为矿井通风除尘提供一定参考依据,给矿井工人创造良好的工作环境。     

全球汞污染回顾与分析

回顾全球所经历的主要汞污染事件,引述国外科研工作者对全球汞污染与汞排放的调查和研究成果,重点介绍金矿开采对环境的污染与危害,揭示造成亚马逊流域汞污染的深层根源。分析今后全球防止汞污染的主要措施：一是主要工业化国家将进一步研究和改善工业领域相关行业的工艺技术水平,趋向无汞产品和无汞工艺,以减少自身的汞污染与排放;其二,发达国家陆续立法禁止汞的自由贸易和出口。发达国家对汞的出口限制将促使发展中国家相关行业（特别是小金矿）采取汞的替代工艺,从而减少全球性汞污染与排放。     

铊,铊中毒及铊在生态系中迁移径迹

铊属于分散元素,独立矿物稀少,极难形成独立铊矿床。铊世界年产量约15吨,几乎都是从有色金属选冶产品中作为副产品顺便回收。我国铊资源比较丰富,按相同等级资源相比,我国铊储量居世界首位。铊的地球化学性质受其电子构型和地质地球化学作用制约,铊原子处于基态时的电子构型为6S26P1。铊有两个地球化学价态,正一价和正三价,在自然界多数呈正一价。铊具有低温成矿,亲硫和高温分散,亲石的双重地球化学性质。铊是有用元素,也是有毒元素。铊被广泛用于超导、电子、合金、光学、化工、玻璃和医药等工业。铊的毒性对哺乳动物比汞、隔、铅、铜、锌还强。铊对生物有毒害,高含量的铊对人体可导致不同程度的铊病,甚至死亡。由于铊矿床的开发利用,使采挖出的含铊岩矿石和冶炼矿渣堆积地表,在长期风化淋滤作用下,使释放的铊进入地表水体、土壤、植物、动物和人体生态链,故引起铊环境污染和铊中毒。     

Mill leaching: a viable substitute for mercury amalgamation in the artisanal gold mining sector?

Artisanal small-scale gold miners (ASM) occasionally employ whole ore amalgamation by adding mercury into ball mills to recover gold. In this process, 25–30% of the mercury added is lost to the environment. It is also inefficient less than 30% of gold is recovered. Amalgamation, followed by cyanidation, has been observed at many artisanal mining sites. This combination poses additional environmental and health consequences. Tests with ore samples from Talawaan, North Sulawesi, Indonesia indicate the possibility of replacing mercury by cyanidation in the ball mill, reaching gold extraction of 93% in 6 h of leaching. The gold in the Indonesian ore sample is fine and less than 8% of gold recovery was obtained with gravity concentration of the ore ground 80% below 0.25 mm, which is a reasonably fine grain size for artisanal gold operations. Replacing mercury addition with cyanidation in ball mills was implemented in one artisanal gold mining operation in Portovelo, Ecuador, achieving 95% of gold extraction in 8 h of mill leaching. This technique demonstrated a drastic improvement in gold recovery. It was found to be a simple, inexpensive technique well accepted by local miners. The results from laboratory and field tests are promising; however a thorough investigation into the socio-economic and environmental aspects of this presented alternative must be conducted prior to introduction.