滦县地面塌陷成因类型及稳定性分区

地面塌陷是滦县地质灾害的主要类型之一,地面塌陷灾害孕灾环境复杂,致灾因子多样,承灾体脆弱,灾害后果严重。人为因素是地面塌陷的主要诱发因素。本文通过对滦县地区由开采铁矿和岩溶作用引起的塌陷现状进行了深入的调查分析,并在此基础上进行了地面塌陷的稳定性区划,为滦县地区地面塌陷灾害的综合防治提供了科学的依据。     

江西省大湖塘石门寺矿区超大型钨矿的发现及找矿意义

江西省武宁县大湖塘石门寺超大型钨矿的成功勘查是我国地质找矿工作的重大发现。矿化类型划分为细脉浸染型、隐爆角砾岩型和石英大脉型。前者占总储量的74%,该类型以晋宁晚期黑云母花岗闪长岩为容矿围岩,以燕山中期酸性深成至浅成花岗岩为成矿母岩。矿体厚大且产状平缓,大致平行于黑云母花岗闪长岩与似斑状黑云母花岗岩株顶部的接触面分布,以外接触带为主(Ⅰ1矿体),水平投影面积1.50km2,单工程最大厚度389.33m,平均厚度143.67m,平均品位0.193%,厚度变化系数63.7%,品位变化系数115.8%。工业矿物主要为白钨矿、黑钨矿、黄铜矿、辉钼矿。矿石组构类型主要有结晶结构、交代结构、细脉状构造、浸染状构造,常见近矿围岩蚀变为黑鳞云母化、云英岩化、绿泥石化,成因类型属岩浆期后高中温热液矿床,工业类型可划归为细脉浸染型白钨矿。石门寺矿区以黑云母花岗闪长岩为容矿围岩的细脉浸染状白钨的发现,改变了以往只专注评价石英大脉型黑钨矿的找矿思路,为矿区及九岭矿集区实现钨多金属找矿突破指明了新的方向。     

综合物化探方法在石庙子沟金矿勘查中的应用

在石庙子沟金矿勘查中,运用了物化探综合方法测量。各方法在金矿体上均有不同的异常反映,异常的吻合程度较好。经槽探工程验证,实测异常分布特征与矿(化)体吻合。表明采用物化探综合方法测量寻找金矿体是行之有效的找矿方法。     

Droplet size spectra and deposits of two aerially sprayed Bacillus thuringiensis formulations on artificial samplers and live foliage

Abstract

Two commercial formulations of Bacillus thuringiensis var. kurstaki (BTK), Foray^® 48B and Thuricide^® 48LV, were applied aerially over nine spray blocks in a hardwood forest in West Virginia in 1991. Droplet spectra and spray mass deposits were determined using water‐sensitive paper strips (WSPS), glass micro‐fiber filters (GMFFs), glass plates and castor oil. Mass deposits of BTK were also assessed on natural foliage by two bioassay methods, i.e., feeding of homogenized foliage containing a starch‐sucrose solution and force‐feeding bioassay of foliar extracts containing re‐dissolved protein precipitate. Deposits on canopy foliage and ground samplers were also assessed by total protein assay and enzyme‐linked immunosorbent assay (ELISA). Droplet spectra on the WSPS were different from those on castor oil. Droplets on horizontal ground WSPS were larger than those on vertical ground WSPS. WSPS placed at canopy level collected more droplets than those at ground level. The total protein deposits (ng/cm²) were consistently higher on all blocks than the delta‐endotoxin protein deposits. Spray mass recovery on the ground samplers were low, and ranged from 2.9 to 8.0% of the applied rates.     

Assessment of aerial spray deposits in a spruce forest using in‐flight microencapsulation technique

Abstract

Spray drops were counted and sized on Kromekote® cards at ground level, and on spruce foliage at canopy level, after aerial application of a formulation containing a microencapsulation medium, over a spruce forest in Ontario. The majority of drops (70%) on foliage was 20 ‐ 75 µm range. A coarse drop size spectrum was observed on cards with a maximum diameter (Dmax) of 380 µm, and with 85% of the drops = 130 µm in diameter. Foliar drop analysis, on the other hand, indicated a finer spectrum with a Dmax of 150 µm, and with 85% of the drops = 75 µm. These results were explained on the basis of formulation ingredients, atomizer setting, weather factors, and drop retention on target surfaces. The assessment of spray deposits on glass plates at ground level indicated that about 16% of the applied spray volume reached the forest floor, a value which is comparable to those obtained in previous forestry applications using the ultra‐low‐volume (ULV) technique.     

Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize on palladium and gold leaching and precipitation

A novel hydrometallurgical process was proposed for selective recovery of Cu, Ag, Au and Pd from waste printed circuit boards (PCBs). More than 99% of copper content was dissolved by using two consecutive sulfuric acid leaching steps in the presence of H₂O₂ as oxidizing agents. The solid residue of 2nd leaching step was treated by acidic thiourea in the presence of ferric iron as oxidizing agent and 85.76% Au and 71.36% Ag dissolution was achieved. The precipitation of Au and Ag from acidic thiourea leachate was investigated by using different amounts of sodium borohydride (SBH) as a reducing agent. The leaching of Pd and remained gold from the solid reside of 3rd leaching step was performed in NaClO-HCl-H₂O₂ leaching system and the effect of different parameters was investigated. The leaching of Pd and specially Au increased by increasing the NaClO concentration up to 10 V% and any further increasing the NaClO concentration has a negligible effect. The leaching of Pd and Au increased by increasing the HCl concentration from 2.5 to 5 M. The leaching of Pd and Au were endothermic and raising the temperature had a positive effect on leaching efficiency. The kinetics of Pd leaching was quite fast and after 30 min complete leaching of Pd was achieved, while the leaching of Au need a longer contact time. The best conditions for leaching of Pd and Au in NaClO-HCl-H₂O₂ leaching system were determined to be 5 M HCl, 1 V% H₂O₂, 10 V% NaClO at 336 K for 3 h with a solid/liquid ratio of 1/10. 100% of Pd and Au of what was in the chloride leachate were precipitated by using 2 g/L SBH. Finally, a process flow sheet for the recovery of Cu, Ag, Au and Pd from PCB was proposed.     

Estimation of mercury content in tailings of the gold mine area of Poconé, Mato Grosso,Brazil

As in many other parts of the world, gold is produced in the surface mining region of Poconé, Mato Grosso, Brazil, using mercury. The goal of this investigation was to estimate the amount of mercury in certain tailings and to determine the area of the land that has been contaminated by the gold mining operations. Mercury concentrations from 2 to 495 ng/g (dw) were determined in the tailing materials. It was observed that only isolated sites were acting as central points of contamination. Using digital Landsat satellite data (The-matic Mapper) and aerial photos, the sites degraded by the mining were classified, and their total area was estimated to be 12.3 km² in the region of Poconé. It was estimated, that 4.9 km² were occupied by the contaminated tailings. The mean height of the pile slags was determined to be 4.5 m. From the experimentally calculated average density of the material in the tailings, 2.01 g/cm³, the total mercury content in the piles of tailings was estimated to be 1600 ± 350 kg.     

新疆萨尔布拉克金矿矿床地球化学及矿床成因

本文介绍萨尔布拉克金矿成矿元素、稀土元素、稳定同位素及石英气─液包裹体的地球化学特征及其在时空上的演化规律．提出成矿元素主要来自地层中的火山物质，下石炭统南明水组的一套火山碎屑岩是矿源层，成矿元素是在动力变质作用下活化、迁够，最后在断裂的交汇部位富集、沉淀、成矿。     

地下金属矿山安全评价体系的探讨

对矿山实行安全评价是确保安全生产的重要措施。根据地下金属矿山生产工艺的特点，分析发生事故的原因及影响因素，以定量分析的方法，从企业管理、工程设计、人员配备、环境条件等方面进行安全评价，提出评价体系，系统而直观地反映企业生产安全程度。     

甬江建闸的环境影响分析

甬江建闸能够阻咸蓄淡,带来一定的社会经济效益;但也会出现泥沙淤积、水体富营养化、水生生物减少等一系列问题,尤其是泥沙淤积,将对防洪排涝、出海航运和现有港口等产生严重的负面影响.就防洪排涝而言,如果建设甬江大闸,那么泥沙淤积后的镇海口将难以通过20年一遇和50年一遇的洪峰流量.综合考虑岸线前进、地面沉降和海面上升的结果,提出甬江大闸还是不建为宜.