Enhanced production of poly(3-hydroxybutyrate) by filamentation-suppressed recombinantEscherichia coli in a defined medium

Fed-batch cultures of recombinantEscherichia coli strains were carried out for the production of poly(3-hydroxybutyric acid) (PHB) in a chemically defined medium. TheE. coli strains used were XL1-Blue, harboring pSYL105, a stable high-copy number plasmid containing theAlcaligenes eutrophus polyhydroxyalkanoate (PHA) genes, and XL1-Blue, harboring pSYL107, which is pSYL105 containing theE. coli ftsZ gene to suppress filamentation. With XL1-Blue(pSYL105) the final cell mass and PHB concentration obtained in 62 h were 102 and 22.5 g/L, respectively. Fed-batch culture of XL1-Blue(pSYL107) under identical conditions resulted in a final cell mass and PHB concentration of 127.5 and 48.2 g/L, respectively. The PHB contents obtained with XL1-Blue(pSYL105) and XL1-Blue(pSYL107) were 22.1 and 37.8%, respectively. Therefore, PHB was more efficiently produced in a defined medium by employing filamentation-suppressed recombinantE. coli.     

Thermal and mechanical properties of poly(lactic Acid) and poly(ethylene/butylene Succinate) blends

In this study, blends of poly (lactic acid) (PLA) with poly(ethylene/butylene succinate) (Bionolle) have been investigated for their thermal and mechanical properties as a function of the concentration of Bionolle. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and tensile tests were used to characterize the blends. From the results of the DMA and DSC, it was found that this blend system was not miscible within the compositions studied. DSC results showed that adding Bionolle aids in crystallization of PLA. It was observed that increasing the Bionolle concentration led to a slight increase in the strain-at-break of the blends but a decrease in the Young’s modulus and ultimate tensile strength. Biaxially oriented films showed an increase in tensile strength, modulus, and strain-at-break.     

棉田生态系统中钾元素的施用效益研究

新疆滴灌棉花施用钾肥,灰漠土平均增产9 1%,草甸土平均增产6 6%。在适宜的氮磷肥条件下,灰漠土滴灌棉花最佳施钾量为94 5kg/hm2;草甸土滴灌棉花最佳施钾量为64 5kg/hm2。每公顷钾肥用量增加1kg,灰漠土棉株体内全钾含量提高0 006029%;草甸土棉株提高0 004457%。钾肥施用方法以基施配合滴施最佳。     

Mechanical and Barrier Properties of Biodegradable Films Made from Chitosan and Poly (Lactic Acid) Blends

Biodegradable film blends of chitosan with poly(lactic acid) (PLA) were prepared by solution mixing and film casting. The main goal of these blends is to improve the water vapor barrier of chitosan by blending it with a hydrophobic biodegradable polymer from renewable resources. Mechanical properties of obtained films were assessed by tensile test. Thermal properties, water barrier properties, and water sensitivity were studied by differential scanning calorimeter analysis, water vapor permeability measurements, and surface-angle contact tests, respectively. The incorporation of PLA to chitosan improved the water barrier properties and decreased the water sensitivity of chitosan film. However, the tensile strength and elastic modulus of chitosan decreased with the addition of PLA. Mechanical and thermal properties revealed that chitosan and PLA blends are incompatible, consistent with the results of Fourier transform infrared (FTIR) analysis that showed the absence of specific interaction between chitosan and PLA.     

Lightweight Concrete Containing an Alkaline Resistant Starch-Based Aquagel

Starch aquagel-based lightweight concrete has properties similar to those of other lightweight concrete products. However, starch aquagels are unstable in the strongly alkaline conditions typical of Portland Cement-based concrete and may interfere with the setting process. The effect of alkali treatments on the physical, mechanical, and functional properties of starch aquagels and aquagels from starch/polymer blends was investigated. Starch was blended at 100–115°C in a twin-screw extruder with five different polymers to determine whether the blends improved alkaline resistance. Polymer blends containing 5%, 15%, and 30% of the polymer hydrated and formed aquagels when equilibrated in water for 24 h. However, equilibrium moisture content was lower for the blends compared to the starch control. Aquagels equilibrated in 0.15 N NaOH swelled, lost compressive strength and had greater than 90% moisture. The blend of starch and 30% PVOH absorbed less moisture and was more resistant to alkaline dissolution in 1 N NaOH than the other blends tested making it a more suitable material for aquagel-based concrete. The moisture content of starch-based aquagels and mixing time were critical factors in determining setting times. The size of aquagel blends had a minor effect on density and compressive strength.     

茶粕有机肥的开发与利用

论述了生物有机肥在发展农业生产中的重要地位,以及生产中存在着的大量使用集约化畜禽养殖场的畜禽粪对土壤、水体等环境质量和农产品质量安全产生严重影响的问题,提出以茶粕作为原料生产有机肥具有生产过程相对安全、克服有机肥二次污染的优点.此外,茶叶次生代谢物茶多酚、茶色素、茶皂素和茶皂甙等具有抗氧化、清除自由基、络合金属离子、调节植物生长和生物防虫、灭虫等独特生理功效,将极大地提高茶粕有机肥的生物有效性,显示出其广阔的应用前景.     

城市分散式粪便颗粒化有机肥用作叶菜肥的肥力及环境影响

城市分散式粪便的处理已经成为现代化城市管理的一个难题.本研究在将城市分散式粪便经收集、除渣、絮凝脱水后制成颗粒肥;通过盆栽小青菜试验,评价了不同施肥量对小青菜的增产效果以及对土壤、淋溶水性质的影响,探讨了颗粒肥用于叶菜施肥的可行性.结果表明,施用颗粒肥可显著提高小青菜产量,试验条件下未对小青菜叶片造成大肠杆菌、大肠菌群等病原菌污染;在适当比例的施肥水平下,颗粒肥施用后淋溶水中的病原菌浓度低于对照组.施用颗粒肥能显著提高土壤氮、磷、钾、有机质等营养物质含量,提高土壤孔隙度水平,降低土壤容重,改善土壤理化性质;同时颗粒肥施用不会对土壤和淋溶水造成重金属离子污染,且能有效降低土壤氮、钾的淋溶.     

添加动物源氨基酸水解液研制生物有机肥

为改善生物有机肥性质,提高生物有机肥质量,采取在生物有机肥中添加外源氨基酸水解液以提升生物有机肥中功能微生物的数量.以病死猪酸解制得氨基酸水解液为生物有机肥外加原料,研究了氨基酸水解液添加量、有机肥种类（鸡粪、牛粪、中药渣）、发酵时间对功能菌株SQR9数量的影响.结果表明:当氨基酸水解液添加量为20%时固体发酵效果优于其他接种量,预发酵3 d后接种SQR9的功能菌数量明显高于未预发酵直接接菌,预发酵中肥料（以干质量计,下同）的最高功能菌数量可达4×108 CFU/g,而第0天接菌时肥料的最高功能菌数量仅为1.2×108 CFU/g.以腐熟鸡粪、牛粪、中药渣堆肥为载体,添加酸解氨基酸研制生物有机肥的最优接菌量分别为10.0%、7.5%、10.0%;SQR9菌株生长的最佳含水量为40%.此外,氨基酸水解液的添加可提高生物有机肥的w（TN）.研究显示,氨基酸水解液的添加能有效促进固态发酵过程中功能菌株数量的增加.      

滇池沿湖地区农田污染生态控制关键技术研究

针对滇池沿湖地区农田面源污染的特点,结合种植生产实际情况,在分析已有研究成果的基础上,按照源-流-汇系统控制的思路,在滇池沿湖地区开展了大颗粒肥料加工施用技术;生物覆盖保护性栽培技术;沟-基-塘系统三项试验研究。实验表明生态控制技术对农田地表径流污染综合负荷TN、TN、CODCr和SS的平均去除率分别达到54.14%～59.78%、66.86%～69.45%、42.20%～62.74%和48.83%～76.41%。生态控制技术的集成研究应用对于滇池沿湖地区生态农业发展和农田面源污染防控具有良好的作用。     

Investigation on the changes effected by tool profile on mechanical and tribological properties of friction stir processed AZ31B magnesium alloy

The present study investigates the effect of tool shoulder profile on the mechanical and tribological properties of friction stir processed AZ31B magnesium alloy. The tool rotational speed and feed rate are the chosen process parameters. The experiments were conducted with 3 level 2 factors full factorial design. The recorded responses were tensile strength, wear losses and corrosion rate. The results were analyzed with the help microstructures of the processed samples. The study reveals that, for concave shoulder tool, the strain hardening effect was playing a major role in determining the properties of the processed materials and for the step shoulder tool, the grain size plays a major role in determining the properties of the processed materials.