北斗导航终端设备可靠性加速试验与快速评价技术研究

针对北斗导航终端设备开展传统可靠性试验时间长、成本高,难以实现在短期内完成高可靠性指标考核的现状,借鉴加速试验建模技术和相关标准的加速模型参数,进行北斗导航整机可靠性加速建模,设计加速试验剖面和方案,预先评估出北斗导航终端设备的加速因子,通过一组样品即可完成北斗导航的加速试验,实现对北斗导航终端设备高可靠性指标的快速评估。     

环境试验数据管理系统的应用

介绍了环境试验数据管理系统的功能及组成,阐述了系统建设的目的和达成的目标,并对其在企业内部的应用效果进行了分析。     

River-Stream Connectivity Affects Fish Bioassessment Performance

Stream fish bioassessment methods assume that fish assemblages observed in sample sites reflect responses to local stressors, but fish assemblages are influenced by local factors as well as regional dispersal to and from connected streams. We hypothesized that fish movement to and from refugia and source populations in connected rivers (i.e., riverine dispersal) would weaken or decouple relations between fish community metrics and local environmental conditions. We compared fish-environment relations between streams that flow into large rivers (mainstem tributaries) and streams that lack riverine confluences (headwater tributaries) at multiple spatial grains using data from the USEPA's Environmental Monitoring and Assessment Program in the mid-Atlantic highlands, USA (n = 157 sites). Headwater and mainstem tributaries were not different in local environmental conditions, but showed important differences in fish metric responses to environmental quality gradients. Stream sites flowing into mainstem channels within 10 fluvial km showed consistently weaker relations to local environmental conditions than stream sites that lacked such mainstem connections. Moreover, these patterns diminished at longer distances from riverine confluences, consistent with the hypothesis of riverine dispersal. Our results suggest that (1) the precision of fish bioassessment metrics may be improved by calibrating scoring criteria based on the spatial position of sites within stream networks and (2) the spatial grain of fish bioassessment studies may be manipulated to suit objectives by including or excluding fishes exhibiting riverine dispersal.     

两种霉菌试验标准的剖析和试验结果的比较

从霉菌试验菌种、试验温湿度对霉菌试验的影响以及实际试验结果的统计方面进行对比分析,探讨分析GJB150.10—86和GJB4.10—83两个霉菌试验军用标准的适用性。     

提高电子元器件使用可靠性的方法

针对实际工作中元器件使用可靠性方面存在的问题．本文通过在实际工作的经验积累和技术研究总结,在电子元器件的选择与检测控制等方面,提出了提高电子元器件使用可靠性的方法。实践证明,这些方法可以直接应用于电子元器件的工程选择与检测控制。     

机柜振动、冲击响应特性的试验研究

机柜是设备的安装架,当其受到某一安装平台的振动与冲击作用后,随着安装位置的不同,机柜内安装的单元设备所经受的振动、冲击量值和谱型也有很大不同。因此对于单元设备的振动、冲击考核条件不应等同于整系统的要求,而应该根据其安装平台的响应制定。     

A level change in mutagenicity of Japanese tap water over the past 12 yr

A relative comparison study of mutagenicity in Japanese tap water was conducted for 1993 and 2005 surveys. It intended to assess the effects of advanced water treatment installations to water works, improvement of raw water quality and improvement of residual HOCl concentration controlling. Sampling points (taps) were the same in both surveys. The results of 245 samples obtained by the Ames Salmonella mutagenicity test (Ames test) were analyzed. The Ames tests were conducted by using Salmonella typhimurium TA98 and TA100 strains with and without exogenous activation (S9). With the exception of TA100-S9, the other conditions needed no discussion as a factor in the mutagenicity level change. The average mutagenicity in 1993 and 2005 under the conditions of TA100-S9 were 2600 and 1100 net revertant L⁻¹, respectively. This indicated that the mutagenicity level of Japanese tap water decreased during the 12-yr period. Particularly a remarkable decrease in mutagenicity was observed in the water works where the advanced water treatments were installed during the 12-yr period. The advanced water treatments were effective in decreasing the mutagenicity of tap water. Mutagenicity also decreased in the water works with conventional water treatments; the improvement of residual HOCl concentration controlling was also considered to be effective in decreasing the mutagenicity of tap water.     

Validation of a booted finite element model of the WIAMan ATD lower limb in component and whole-body vertical loading impacts with an assessment of the boot influence model on response

Objective: A novel anthropomorphic test device (ATD) representative of the 50th percentile male soldier is being developed to predict injuries to a vehicle occupant during an underbody blast (UBB). The main objective of this study was to develop and validate a finite element (FE) model of the ATD lower limb outfitted with a military combat boot and to insert the validated lower limb into a model of the full ATD and simulate vertical loading experiments.

Methods: A Belleville desert combat boot model was assigned contacts and material properties based on previous experiments. The boot model was fit to a previously developed model of the barefoot ATD. Validation was performed through 6 matched pair component tests conducted on the Vertically Accelerated Loads Transfer System (VALTS). The load transfer capabilities of the FE model were assessed along with the force-mitigating properties of the boot. The booted lower limb subassembly was then incorporated into a whole-body model of the ATD. Two whole-body VALTS experiments were simulated to evaluate lower limb performance in the whole body.

Results: The lower limb model accurately predicted axial loads measured at heel, tibia, and knee load cells during matched pair component tests. Forces in booted simulations were compared to unbooted simulations and an amount of mitigation similar to that of experiments was observed. In a whole-body loading environment, the model kinematics match those recorded in experiments. The shape and magnitude of experimental force–time curves were accurately predicted by the model. Correlation between the experiments and simulations was backed up by high objective rating scores for all experiments.

Conclusion: The booted lower limb model is accurate in its ability to articulate and transfer loads similar to the physical dummy in simulated underbody loading experiments. The performance of the model leads to the recommendation to use it appropriately as an alternative to costly ATD experiments.     

中国典型城市环境空气质量变化趋势分析研究

文章选取北京市、兰州市、乌鲁木齐市、青岛市、武汉市、深圳市这六个典型城市为研究对象,利用2003年-2013年六个城市的SO2、NO2和PM10浓度数据,计算出区域空气综合污染指数和污染负荷指数,并采用Daniel趋势检验法分析主要污染物的变化趋势.结果表明,六个典型城市环境空气质量状况从优至差排列依次为深圳、青岛、武汉、北京、兰州、乌鲁木齐;六个典型城市空气首要污染物为PM10,SO2的污染负荷呈下降趋势,NO2的污染负荷呈上升趋势;各城市的空气质量整体呈现好转趋势,表明大气治理初见成效.     

我国城镇化进程中碳排放影响因素的实证研究

利用1980—2013年间的城镇人口与碳排放数据,选取城镇化进程中影响碳排放的城镇化水平、城镇建设用地面积、第三产业增加值、人均可支配收入、城镇人均绿化面积等因素,实证分析了城镇化对我国碳排放的影响程度,并利用格兰杰夫因果关系与误差修正模型分析了二者的因果关系与时间效应。最后,从降低工业碳排放、加快低碳城镇化试点建设、推进低碳社区发展,促进新能源发展等方面提出了相关建议。