Hydromorphological and socio-cultural assessment of urban rivers to promote nature-based solutions in Jarabacoa,Dominican Republic

In Latin America and the Caribbean, river restoration projects are increasing, but many lack strategic planning and monitoring. We tested the applicability of a rapid visual social–ecological stream assessment method for restoration planning, complemented by a citizen survey on perceptions and uses of blue and green infrastructure. We applied the method at three urban streams in Jarabacoa (Dominican Republic) to identify and prioritize preferred areas for nature-based solutions. The method provides spatially explicit information for strategic river restoration planning, and its efficiency makes it suitable for use in data-poor contexts. It identifies well-preserved, moderately altered, and critically impaired areas regarding their hydromorphological and socio-cultural conditions, as well as demands on green and blue infrastructure. The transferability of the method can be improved by defining reference states for assessing the hydromorphology of tropical rivers, refining socio-cultural parameters to better address river services and widespread urban challenges, and balancing trade-offs between ecological and social restoration goals.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13280-021-01565-3.     

沈阳市发展低碳经济的探索与实践

概述了近年来沈阳市发展低碳经济工作的进展情况,介绍了沈阳市发展低碳经济具有的深厚基础以及政策、机制和体制机遇,并从建设大浑南低碳发展样板区、实施低碳交通体系建设工程、建设低碳电力供应工程、开展低碳社区建设工程等方面出发,提出了沈阳市实现低碳发展的战略构想。     

城市污水生物脱氮除磷的新理论与技术

评述了近年来城市污水生物脱氮除磷理论和功能微生物的研究进展,重点介绍了生物处理的新方法：短程硝化反硝化处理法、厌氧氨氧化处理法、同步硝化反硝化处理法、同步反硝化除磷脱氮法,并总结了各处理工艺的应用状况。对生物脱氮除磷微生物学和新的理论技术发展趋势做出了展望。     

高中速过滤器的选择

介绍了高中速过滤器的应用环境、工作原理和结构组成,并从结构组成及工艺环境和实际应用性价比方面,提出实际工作时选择高中速过滤器的注意事项。     

刮油刮渣机的结构设计与应用选择

介绍了刮油刮渣机的工作原理和基本结构组成及应用结构方式,并从工艺环境及应用选择的性价比方面,提出实际工作时选择刮油刮渣机的注意事项,达到设备的最大合理化应用。     

2004—2017年浙江省较大以上生产安全事故统计分析

为充分探究浙江省生产安全事故发生规律,以2004—2017年浙江省生产安全事故为研究对象,从事故发生的时间关系、区域分布、行业分布、事故类型分布等方面对全省总体、工矿商贸领域、化工领域、典型危险作业4个分类的较大以上事故特点进行了剖析研究;并从政府监管的角度,提出事故防范的措施和建议。     

Fatal pedestrian crashes on interstates and other freeways in the United States

Introduction: More than 800 pedestrians die annually in crashes on interstates and other freeways in the United States, but few studies have examined their characteristics. Method: Data from the Fatality Analysis Reporting System on pedestrians fatally injured during 2015–2017 were analyzed. Chi-square tests compared characteristics of pedestrians killed on interstates and other freeways with those that died on other roads, and across crash types among freeway deaths. Land use characteristics of locations where pedestrians were killed while crossing freeways in a large state (California) were identified using Google Earth. Results: A larger proportion of pedestrians killed on freeways died on dark and unlit roads (48% vs. 32%), were male (78% vs. 68%), or were ages 20–44 (55% vs. 32%) compared with pedestrians killed on other roads. Crossing (42%) was the most common crash type among pedestrian deaths on freeways, followed by disabled-vehicle-related crashes (18%). Pedestrians who died while crossing more often had blood alcohol concentrations ≥ 0.08 g/dL (40%) than those in disabled-vehicle-related (22%) or other crashes (34%). Deaths in crossing crashes were more likely than other freeway deaths to occur on urban roads (81%), at speed limits ≤50 mph (13%), or between 18:00 and 23:59 (49%), and 58% of crossing crashes analyzed for land use were located between residential and other (e.g., commercial, recreational) uses. Over a third (37%) of deaths in disabled-vehicle-related crashes occurred at speed limits ≥70 mph. Conclusions: A surprising proportion of pedestrian deaths occur on controlled-access roads not designed for walking. Countermeasures for these crashes need to be implemented to see meaningful reductions in pedestrian fatalities overall. Practical applications: Improving roadway and vehicle lighting, requiring reflective warning devices for marking disabled vehicles, constructing pedestrian overpasses and underpasses in areas frequently crossed, and promoting alternative means of traveling between residential and commercial areas could help.     

Experimental research of LNG accidental underwater release and combustion behavior

Evaluating potential hazards caused by accidental LNG release from underwater pipelines or vessels is a significant consideration in marine transportation safety. The aim of this study was to capture the dynamic behavior of LNG jet released under water and to analyze its vapor dispersion characteristics and combustion characteristics on the water surface during different release scenarios. Controlled experiments were conducted where LNG was jet released from a cryogenic storage tank. The dynamic process of LNG being jet released from orifices of different sizes and shapes, as well as the rising plume structure, were captured by a high-speed camera. The leakage flow rate and pipeline pressure were recorded by a flow meter and pressure gauge, respectively. The concentration distribution that emanated from the water surface was measured utilizing methane sensors in different positions with various wind speeds. The flame combustion characteristics of LNG vapor clouds, which immediately ignited upon the enclosed water tank, were also recorded. Additionally, the mass burning rate of the flame on the water surface was evaluated, and a new correlation between the ratio of flame length and width was established. The results indicated a large dimensionless heat release rate (Q*) and a continuous release flow rate in a limited burning area. This study could provide greater understanding of the mechanisms of LNG release and combustion behavior under water.     

Study on explosion risk of aluminum powder under different dispersions

This paper mainly studied the influence of particle size distribution on the explosion risk of aluminum powder under the span of large particle size distribution. The measurement was carried out with the 20 L explosion ball and the Hartmann tube. The statistical analysis was used to analyze the relevance between the parameters of explosion risk and the particle size parameters. Test results showed that with the increase of particle size, the sensitivity parameter increases and the intensity parameter deceleration decreases. The effect of particle size change on MEC and MIE of small particle size aluminum powder is relatively small but greater impact on Pm and (dP/dt)m. The small particle size components greatly increasing the sensitivity of the explosion and accelerating the rate of the explosion reaction; while the large particle size component contributes to the maximum explosion pressure. D_3,2 particle size dust determines the risk of aluminum powder explosion.